Acer :: SDHC CArd In 5630
Dec 9, 2008if i can get my Card reader built in to the ACER 5630 to read SDHC cards? surely it could be sorted with a driver update? real pain in the ass if no work around
View 5 Repliesif i can get my Card reader built in to the ACER 5630 to read SDHC cards? surely it could be sorted with a driver update? real pain in the ass if no work around
View 5 RepliesI have a new Dell 10 Netbook and purchased a Sandisc 16 GB Card for netbooks. The card does not enter fully into the memory expansion slot. My computer does recognize it and opens, but the card sticks out of the computer. I thought the card should be invisible, my experience in using cards for other devices. Is this norma.? I don't want to force the card.
View 6 Replies View RelatedHigh capacity SD cards of 4 GB or 8 GB (or even higher) has been in the market for some time. Can Sony Vaio TT read these high capacity cards without an adapter?
View 10 Replies View Relatedhow to make the 4GB SD Card works? I tried the sd card on my other computer and has no problem. I searched the Internet, it seems that the vaio has a limitation up to 2GB only.
View 3 Replies View RelatedI need some help:
1) I want to know if anybody is using an SDHC card as a readyboost drive
2) What are the maximum SDHC specs that can be utilized by the computer (both size and class), i.e., what is the maximum size and speed supported by the reader.
If am thinking of buying this card for readyboost (I plan to have it always in the slot): ...
I have X1 Carbon Type 3443. Is there a way to use scandisk micro SDHC card? In past (other laptops), I was able to use USB to read them.
View 1 Replies View Relatedproblem i have with my lcd screen.P01-10-09_14.18.jpg
As you can see the screen is completely white, its hard to tell by the picture but the edges off the screen are fading to black and there is lots of little lines running horizontally as well.
Now when i plug an external screen the picture comes up on the external and the computer works fine, just seems that the laptop screen is playing up for some reason.
Also when i turn the laptop off for an hour or so the screen suddenly comes back to life, sometimes for days and sometime for only a couple of hours.
I recently bought 4gb of ram (kvr667d2s5k2/4g)
Kingston Memory/4GB 667MHz DDR2 Non-ECC CL5 SODIMM (Kit of 2)
but my acer only recognizes 1 module at the time. i tested both modules seperatly but and both work so its not the modules. also the bios sees only 1. what is wrong here? according to the sites and manuals it should recognize both mdules.
I downgraded this last year to run Win XP, now thinking about wipping it and turning it into a W7 machine.
[url]
Problem is no compatible drivers, i don't want to load W7 and get a big surprise that it doesn't work on this laptop.
anyone done a W7 upgrade yet?
Recently I bought new Acer Extensa 5630 with 4GB & 320 GB Hard disk.I installed Windows XP os ,on mycomputer properties, it is showing 3GB of RAM Size,I contacted the dealer who sold the laptop and he is telling 4gb is not supported for Windows XP.SO I changed the OS to VIsta home Basic stil it is showing 3GB instead of 4GB.
View 12 Replies View RelatedMy scroll and media keys arent working now more.
ready project
How would I get them to work again.
I've had an Aspire 5630 for about three years and its just started a buzzing noise at the back left of the laptop.
View 5 Replies View RelatedI have acer 5630 bought in 12/08, 5 months later---- charged overnight. Woke up in morning to find that top corner on back of screen is melted and bubbled up, like it shorted out from the inside. Sent to Acer and tech says " You had to put it next to a heat source". I told them NO WAY!, but they say there is no way this could happen without a heat source from the outside. I guess someone got in the house last night and took a propane torch to it, or maybe they held a candle to it for ten minutes. There is no damage to the screen and the unit still works fine. This is driving me crazy. Oh, I forgot maybe our chihuahua held the torch to it.
View 6 Replies View RelatedI have an Acer Aspire 5630 and since 2 weeks i'm having problems with the touchpad and the keyboard. I tried reinstalling Windows Vista which didn't work. Then i tried windows 7 and it also has the same problem( also tried new drivers etc) . With an extern keyboard and mouse it is able to use te laptop.
fn+ f7 doenst work. (because de keyboard doenst work )
The strange part is that when i acces the bios, de keyboard works.
I currently have two Acer laptops, an Aspire 5630 laptop and an Aspire One Netbook. The power adapter for the 5630 is a bit bigger (i.e., the "black box in the middle of the power cord) than the one for the netbook. The adapter for the netbook won't charge the 5630, however, when I plug in the adapter for the 5630 into the netbook, it says "charging" and seems to be charging the netbook fine. My question is whether this could do any damage to netbook or the netbook battery.
View 8 Replies View RelatedWhen I use to plug my laptop into the mains you could see the screen got a lot brighter as though it was a power surge. For some reason that no longer happens the display is quite dull and tough to read unless in a dark room!
There was a distinct difference to screen brightness between 'High performance' and 'Power saver' mode. This is no longer the case and the laptop seems stuck in power saver brightness!
I upgraded my RAM to 4gb and installed Vista x64 Home Premium. the system was only showing 3gb on start up so I updated BIOS to 3.50 via DOS as it can not be done inside Vista x64.
Bios update completed and notebook shutdown.
Now no power in notebook.
No lights on when connected via Power adapter or battery.
system will not turn on.
Downloaded and tried the crisis disk to reset the BIOS and still nothing.
I can't seem to load the Touchpad Software fot the Acer 5630 Laptop ? Do I use the Alps or the Synaptics Software ? When I load the Alps I get pop-ups on startup that don't go away asking me if I want to start Apoint.exe and other files. I uncheck the pop-up but it still keeps coming back ? When the computer fully loads and I right mouse click on the Touchpad Icon in the right bottom tray it shows up like regular mouse software. It used to have an area asking me if I want to shut the touchpad. Not anymore. As for the Synaptics Software if fails when I try to load it. Do you have a solution to this problem ? I do use a USB Mouse and never use the Touchpad.
View 4 Replies View RelatedDoes anyone have the service manual for aspire 5630 series?
View 7 Replies View Relatedmy dad has an Aspire 5630 and he wants to know what sort of upgrades he can do on it, would he be able to upgrade the ram to 1GB and put an 7,200rpm HD in it?
View 5 Replies View RelatedI have a new Aspire 5630 with vista installed. The disk drive is very high speed and whistles loudly when installing applications from dvd. I expect this and it is not a problem The trouble is that when i try to play a music DVD the same sound completely swamps the music and so DVD playback is a NO NO.
On my desktop PC I had a similar problem and had to install Nero Drivespeed which allows me to set playback speed to "silent"
This does not seem to work on vista ( neither does any other program that i have tried.)
Surely this must be a problem to a lot of people and I would assume that there would be a setting in the bundled DVD playback software to solve this problem. Or perhaps there is?
Can I upgrade my Aspire 5630 from XP to Windows7/8?
View 3 Replies View RelatedI need "Acer Empowering Technology for windows 7 x64 extensa 5630" for my laptop.
View 12 Replies View RelatedI have an Acer Aspire 5630 and the USB ports do not go off when Windows is shutdown, hibernating or when it goes into slleep (standby) mode. They only go off when I disconnect the AC power. I just bought an external USB drive as my internal is almost full, but I don't want to have the external drive on 24/7. Disconnecting the drive is a bit inconvenient as I use the laptop with an external display and keyboard and keep the laptop itself hidden behind my desk. I updated the BIOS to Ver. 3.60, but I don't see settings in the BIOS for USB ports. Can these ports be turn off programatically. Do I need a special Acer Application or drivers to turn off the USB ports? I removed all the Acer Management bloatware that came with the laptop. Are there any jumpers inside the laptop that need to be changed?
View 6 Replies View RelatedOn the Gateway, it's a T2450 (2.0ghz) while the Acer has a T5550 (1.66ghz). I don't know which one is better, but I'm thinking the Gateway would be better (but bigger isn't always necessarily better?)
I was also wondering which one has better tech support and warranty also? This will be my first laptop and I hope it will last me for a long time. I guess I'm looking for a better bang for the buck.
Here are the links for both of them:
[url]
[url]
On my Acer Extensa 5630, how do I turn the wireless connection OFF ? I now have a LAN cable ...
View 1 Replies View RelatedI have an acer aspire 5630 with a geforce 7300 go.
I am suppose to have 1024mo RAM but it only shows physical memory 766 everywhere.
In bios, extended sharing is set to 766...and i can't change it, it's in blue.
My video memory is 128.
Is there a way i can change the sharing memory?... so i know if my ram is broken? It still under warranty for a month.
Also, my fan does a huge noise ... but only when i start it.
When a play games like cod4... it's heating but everything is fine, any isues? maybe a bearing? Should I change my fan? cleaning it up does nothing.
I have an acer extensa 5630,can i do a factory restore?as i dont have the original disc.
I have these specs on my laptop-
Windows Vista Home Premium, Service pack 2
Acer Extensa 5630.
Pentium (R) Dual Core CPU.T4200 @2.00 GHZ 2.00 GHZ
2GB RAM
32-BIT
a have a acer aspire 5630 and my dvd driver has a problem this is what it says Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
View 5 Replies View Relatedour laptop keeps throwing a flakey when trying to install Win7 Ultimate over the current crappy Vista OS.
Laptop passed the compatibility checker no probs & has all the updates installed, but every time we try, we get either
1. windows 7 install failure message then black screen with cursor
or
2. straight to black screen with cursor.
This is even after changing to the low res setting that is mentioned so often when googling the issue.
I've looked on the Acer site, but it says if I got it from pc world I should take it up with them?
Anyone here have any advice to get it to work, or should we just smash the laptop off a wall?