i have upgrated my cpu from t2390 to t8100.i have 1.43 bios.but i dont know if speedstep is working properly because in cpuz i see the frecuency changing constantly from 1.2gz to 2.1gz again and again.also im running the latest edition of everest ultimate and in the taskbar icons are showing only 2.1gz.with the t2390 it was working ok.same thing happens on vista home premium sp1 and xp prosp3(dualboot).
View 6 RepliesI have an Acer Aspire 5715Z notebook and I would like to change my motherboard to a more powerful one which has a normal graphics card, not an integrated one.
The motherboard of the 5720G is compatible with this model? If not, which one?
Another question:
Can this series of Acer notebooks use 800MHz DDR2 rams? Or up to just 667MHz?
I have just bought an Aspire 5715Z and the cursor jumps all over the page and makes writing a nightmare. Just this note has taken 3 times as long to write. I have had Acers and other laptops before and I have tried typing touching only the keys. The cursor may highlight and delete whole paragraphs or zoom off the page.
View 5 Replies View RelatedMy 17 mth computer suddenly had a blue screen with error messgae
PAGE_FAULT_IN_NONPAGED_AREA ......etc it told me to push F8 to open in safe mode which I did but nothing happened! I turned the computer off and now it won't open up again. The power registers but the screen stays blank! Anyone got any suggestions or is it past hope?
I have tried to contact ACER U.K by e-mail but it won't accept my message as it says SNID number should not exceed 11 digits but it's actually only letting me put in 3 digits! I've also tried to ring but every number is coming up invalid or 'mail box full'.
which motherboards are compatible with the one of the Acer Aspire 5715Z?
View 7 Replies View RelatedIs there a way to disable speedstep on my acer 6935G? i use it plugeed in all the time.
View 6 Replies View Relatedi recently installed vista service pack 1 on my system which is a 64 bit OS! a couple minutes after installing and installed all necessary drivers, i then tried to install the PC game by the name of grid, half way into installation, my laptop shutdown giving me the blue screen that say hardware error and dumping memory.... i tried rebooting a couple time but same blue screen results, so i opened my system and then boot again, i then noticed my fan wasnt running continuously, it runs for a couple seconds then stops and then runagain for another couple seconds and stop, it continuously repeats that step, so i then removed the fan and cleaned out the sponge thick dirt i saw in it, blow out the dust from vents and from heat sink, then i tries booting up again and the fan behaves the same god darn way..... how can i solve this problem do you think weather or not my system is 32 bit or 64 bit, wud it affect the operation of my fan?
View 4 Replies View RelatedI just recently acquired a m170 and have an issue. I could not get it to stay on for more than 30 sec to load windows.....as soon as i disabled speedstep in the bios i was able to load windows.....only problem laptop runs at 800mhz......if i enable speedstep it shuts off before windows loads.....
View 15 Replies View RelatedI just run some test on my my Z46 (P9700 2.8Ghz) and found there is something unusual.
I set the Vista power manager profile to high performance which suppose to give me the max speed of the CPU settings and I check with CPU-z and the reading was 2793.2Mhz which is correct ... however when I try to run some CPU stress test it CPU-z shows the multiplier jump back to x6 (suppose 10.5) and the core speed reduce to 1.6Ghz. And then I start notice whenever I have the CPU on full load it will switch to 1.6 Ghz instead of 2.8Ghz...
I tried it with different software and same happen.. I also monitor the temperature and it's only 65-68 which is normal to me...
I just can't figure out why the CORE speed would drop when it suppose demand the highest speed..
Is it just my Z46 or anything have the same happen ?...
Here is a brief description of my problem. I have a e1505 w/ a Core Duo (1.66GHz, T2300) My power adapter is reported to me "unknown" by the laptop. (total BS as i know the thing works) and then QuickSet tells me my battery needs to be replaced (this was too soon, so it leads me to believe that the power adapter did something to the battery) But I can't replace those right now. So i'm stuck at a multiplier of 6 (and yes i've disabled all the power saving features in the bios, but the wired thing is windows reports the real speed while other programs such as CoreTemp and CPU-Z report it at being just under 1GHz?)
And to get these things brand new would cost ~$120 (battery and adapter) So is there anyway I can get around the stupid limitation dell has imposed until i can find replacements for these? And, where is a good place to get replacements that won't cost me an arm and a leg?
I upgraded the system OS from XP to Vista. Everything seems fine, but there is an error logged in the Event Viewer on every boot.....
View 8 Replies View RelatedI just got a new Elitebook 6930p and its a fantastic laptop other than the dreaded "CPU whine" as some call it. Most uneducated people believe it is the CPU that makes this noise but in reality this has NOTHING to do with the CPU. Its the power components like capacitors and coils that make the Piezoelectric Effect which causes the noise.
I could not bear the whine noise after a few days so I took matters into my own hands. Sure I read about stopping the C1-C4 states in Intels speedstep but thats not a proper solution IMO since battery life will suffer. So how can we mask or cover up this annoying noise? How can we seal it inside the laptop so it does not reach our ears? I have the solution!
tube.JPG
Seal it up all the power components with silicon sealer. Silicon sealer is perfect as it does not conduct electricity. These components do NOT generate any heat either.
6390ptop.JPG
6390pbottom.JPG
GLOB IT ON!
Glob1a.JPG
Glob2a.JPG
OH YA! MORE GLOBING!
Glob3a.JPG
No more annoying whine noise! It really works!
I have an Acer 5610-4610 system. It was repartitioned to one XP drive for several years. I am finally wanting to put the PQ service partition back on it but none of the folders of the restore CD's have any of the files needed to recreate this partition. I am wanting to put the factory (VISTA Home Premium) system on C. With all the system files and folders from the 3 restore CD's into the PQSERVICE partition. I have no clue how to proceed.
I do remember there was an acer(C) partition and a data (D) partition when I got it. The PQSERVICE partition was there back then.
The first (System) CD has none of the files mbrwrdos.exe or rtmbr.bin
used to create the PQSERVICE system.
I run the ACER Disk Formatter and it cannot find any drives on the laptop.
Weird! From what I've been able to glean my thought was that that the Formatter disk would facilitate creating the correct partitions?
im going to clean upgrade to win 7 64 bit, after i do that i know acer do drivers for web cam ect... but can i download acer software eg Empowering Technology, Acer Arcade Deluxe ect.
View 10 Replies View RelatedI successfully upgrade an old laptop so that it will run well and not be too costly to upgrade either? So slow at present....
Laptop is:
acer travelmate 4502WLMi running xpsp3
Was thinking that probably the only upgrades worth considering were ram and hdd.
If this is the case what size mem and spec will work?
If the hdd is worth upgrading do I go for internal or external? and what size ?
Compaq Presario A931NR or Acer Aspire AS7720-6569?
Wondering which is the better choice? ...
Recently I developed this simple application that lets you easily configure CineDash and other buttons functions on Acer laptops. This application, “Acer CineDash Config”, is mainly for mine purposes.
I tested it on my Acer 6935G and Windows 7 64bit version. It probably should work on other models and systems to.
Some of the features that Acer CineDash Config supports are:
•32bit and 64bit systems
•Configuring applications to run and captions for buttons:oArcade DeluxeoEmpowering tech.oInternetoE-Mail•Making and restoring registry backup
•Enabling media keys to work with other programs, like winamp, and restoring original key mapping file
Here's screenshot of it:
I have a wireless network setup between my desktop w/xp pro an my laptop w/vista home preminum Acer 5570Z.
My laptop can open drives & folders on my desktop, but my desktop can't open drives or folders on my laptop it says I don't have permission. I fixed this once before but can't remember what I did.
I have an Acer 6930ZG with a fresh install of windows 7 RC 32bit. I can play Call Of Duty 4, Counter Strike, Flatout 2 etc. with no problems! But when I try to open MapleStory a blue screen appears, and begin to make a physcial memory dump? . MapleStory is a 2D-game, and Call Of Duty requires much more.
I made a little research, and I found out that alot of people have the same problem, and they said it was caused by a conflict with a program or hardware drivers. I have tried to delete my NVIDIA driver, and install it again. No luck.
And yes, I have also tried to run MapleStory in compatibily mode
As I said: It's only in MapleStory I experience the problem, and I don't think it's ram-failure, since I have seen the same problem on a different computer, and I can play Call of Duty 4.
Here is the system log:
Problemsignatur:
Navn på problemhændelse:BlueScreen
OS-version:6.1.7100.2.0.0.256.1
Landestandard-id:1030.....................
i have laptop Acer 5920G
VGA card NVIDIA GeForce 8600 GT
but its performance very bad and i cant believe its up 2 1024
i barely can play FIFA 2007 and its slow!
is it up 2 VGA driver?
setup icon details say it's version is 9.1.0.429
is their any new drivers 4 it .........
Which Acer Empower programs can be deleted off my Aspire 4720z?
-Acer Assist
-Acer eAudio Management
-Acer eDatasecuirty Management
-Acer eLock Management
-Acer Empowering Technology
-Acer ePower Management
-Acer ePresentation Management
-Acer eSettings Management
-Acer GridVista
-Acer Mobility Center Plug-in
-Acer Registration
-Acer ScreenSaver
-Acer Tour
does the acer aspire 5583 support 5.1 audio output? ( realtek hd audio)
View 10 Replies View RelatedI had vista installed on my laptop, Acer 6920, (first OS) and it was direct from factory so everything worked fine. I then installed ubuntu and everything still worked fine. I then deinstalled both of those to put on windows 7 RC where all my hardware was working perfectly (minus the fingerprint reader but i honestly couldnt care about that thing) so my computer eventually got pretty bogged down with crap to the point where boot was about 30 minutes. during this whole time my sound seemed to work, but near the end windows stopped finding any internal sound related hardware (the speakers and the mic). For other reasons i did a clean reformat (3 times) and reinstalled 7 Professional 32 bit and when i booted i downloaded all the drivers and everything seemed to install correctly, but when i rebooted the sound still didnt work nor did the mic. the exact error message windows is giving me is "No Audio Output Device found" however when i plug in a headset or a bluetooth adapter + headphones there is audio and it works perfectly. I really need sound to work as some programs crash if they dont detect a sound output and also for monitoring audio recordings.
I have tried installing all of Realtek's drivers. Literally all of them. None of them worked what so ever despite clean installs and deinstalls.
I now am running 64bit and ive almost given up on this problem. I bearly saved this computer and i dont wanna have to buy a new because of sucha stupid issue like this.
More info:
Under the hardware manager in windows there is no tree for sound devices. there was an unknown component which i put forceware on as i thought it was the sound device but no go.
DXDIAG:
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Acer
System Model: Aspire 6920
BIOS: Ver 1.00PARTTBL6
Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2 CPUs), ~2.2GHz
Memory: 3072MB RAM
Available OS Memory: 3070MB RAM
Page File: 1303MB used, 4835MB available
Windows Dir: C:Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 64bit Unicode
i own a acer 4920, but i am interested in upgrading the utilities on my laptop and i see that they have brought out a new framework for some of the other notebooks.
is it possibly to upgrade these features on an acer aspire 4920
i have a ACER 5101 laptop. suddenly one day my keypad and touchpad is not working,
i cant even go to Bios by pressing F2. only sometimes Fn+F6 works.
I just installed XP Pro on my Acer Extensa 4630Z and I installed all the drivers successfully but the wireless driver. I tried all the drivers from acer's support site [url] none of them work. I also tried what worked for Davoucci with same laptop but this driver also doesn't work for me
View 10 Replies View RelatedI've noticed that there is a new firmware 1.10 for Acer 6935... Is it safe to install it? Someone tested? I checked in my BIOS that I have 1.04...
View 9 Replies View RelatedThe image below willl show you a list of items previously installed on my Acer 5315...
Is it safe to remove any of these or will doing so cause more trouble than its worth.
Reason: I never use any of them. In fact, I just removed all the games from the machine.
ive just re-installed vista home premium on my acer travelmate 5320 but now the led for the wireless is reversed, so when the wifi is on the led is off and vice versa does anyone have any ideas whatsoever as i am at a loss with this one.
View 4 Replies View RelatedI have an Acer 5672. It has the media keys on the left side of the keyboard where i can control the volume, stop, pause etc. I reformatted my machine and reinstalled XP Pro. When i use the media keys there is no display on the screen of what i am doing. What i mean is before if i turned the volume up or down it would display on the screen and you would see like a volume bar moving up or down. How do i get that back?
View 4 Replies View Related