I recently got an acer aspire e15 for xmas and I've started to have problems with it like when i turn it on and adjust the screen or simply pick it up to move it the screen will turn off like a standby but take ages coming back on and sometimes it will just simple restart the laptop....
View 1 RepliesFirst of all my laptop is : HP Pavilion dv6-6160se Entertainment Notebook
To the problem now : A few days ago my laptops screen started out of a sudden shutting down/turning black( no lights at all ). This was happening while using the laptop at random. The screen had no lights, and if i use a flashlight on it there is nothing. like its turned off completely.
Before this happens. This behavior varies. Sometimes it flickers from my desktop to a black screen then back on and some times not. Most of the times screen changed to a random color (green mostly) then becomes black/shuts down.
NOTE: The laptop keeps running, i can hear the videos playing so it probably isn't a gpu chip or gpu issue , music and games.
Here are everything i tried and all or the details i could accumulate in past couple of days:
1. If the screen flickers , blacks out and then turns back on i get a message that gpu drivers have stopped working and recovered ( on both amd and intel ).
2. If the screen blacks out, on rare ocasions if you close the laptop lid and let the laptop go to sleep , when waking up screen works again ( noticable due to screen moving)
3. I tried installing 4 different drivers all with clear install. ( didn't work)
4. I tried to to recover system with restore point. ( didn't work)
5. I tried to lower the screen brightness. ( didn't work)
6. tried this trick: Turn off laptop.. Remove battery.. Hold the power button for 30-45 seconds.. Plug-in the charger ( don't put the battery in )Turn on laptop and see if it works.
Very Noticable details:
7. Since on of the rare fixes requires to move the lid i tried shaking the screen a bit or pushing it slightly to different directions. This actually does the trick and turns the screen back on ( i am right now typing this after using this "trick"
So, with this one as a hint there are a couple of stuff i have in mind but i am not sure ...
a) There is a loose LCD cable and when i type a little vibration moves it and ends up in a black screen.
b) I read that if you use a flashlight and you cant see your desktop it means its a bad inverter.
c) Can the inverter have a lose cabe instead of the lcd ?
Currently the screen looks ok ( maybe its the certain angle it has after i moved it. Tried to play a game for a few mins and i got the black screen again. Closed the lid so the laptop goes in sleep mode then opened it and it worked. Just for the records.
Just tried to play a game again. got the blackscreen, shaked the screen a bit and it worked but for the 1st time i get the message " Application has been blocked from accessing graphics hardware" , Can it be that its the GPU after all or maybe drivers?
Tried to play a game again and it seem to trigger the issue . ( i am currently running the laptop with only the intel drivers installed) ...
I have a Compaq Presario CQ60. The Display does not appear to be working. When I turn on the laptop the display remains black. No boot up screen, nothing. I can't go into the bios because I have no screen. The screen remains black. The harddrive appears to be working and all other functions appear to be working but I am not sure because I have no screen.
Is this a known issue with the Compaq Presario CQ60?
I have installed Win 7 on Aspire E1-510 (Celeron quad Core N2920).
I can't adjust display/monitor brightness. Fn combinations does not work also.
In control panel>Display there are no any option for adjusting brightness.
Note: All drivers installed
The HP dv4-1548dx laptop computer has keys to adjust the display brightness of the LCD display but no keys to adjust the contrast. "Operating system Windows 7" How can I adjust the Contrast ?
View 2 Replies View Relatedi have a dell latitude e6410 and the when it boots up its fine but when i move the mouse pad it crashes and the screen goes black.
View 1 Replies View RelatedRecently, the screen on my laptop goes blank, then after a few seconds returns to normal with a message that the display driver stopped working but has recovered.
Is there a possible solution to stop this happening?
I have laptop listed above. For the past 3 days I hasn't not been able to get it in. it sounds like its starting but the screen stays black. Recently installed antivirus on 01/01/2012 because I had some kind of worm/malware. Windows 7 is the OS. Cap lock light is on and "hp combo assistant" light is on constant no blinking. Don't know what to do.
View 9 Replies View RelatedI tried everything I could but am not able to adjust the brightness of my laptop (i.e. HP 250 G2 Notebook).
View 5 Replies View RelatedBasically the Fn Button, Left, Right, Up, Down buttons are all working fine. I can adjust the volume of the notebook, but I can't however adjust the brightness of the screen. There is no brightness setting in my notebook whatsoever! Am I missing the brightness driver? what is the name of the brightness driver? Or is it something else. Taking into account that I have decrease/increase brightness symbols on the left/right buttons respectively.
View 1 Replies View RelatedI just got my new Acer Aspire V14 touch (Windows 8.1) and want to connect it to my Sharp Aquos LC-32DA5U TV via HDMI. I can see the picture but cannot adjust the screen resolution to the native resolution recommended for this TV (1366x768). Funny enough this is exactly the resolution my laptop is using.
When I force use of this resolution via show all in the display properties, then I don't get a picture but just a black screen on my TV.
Is there any other driver etc that I need to install to make this work? It worked perfectly fine as PnP with my old Lenovo computer under Windows 7.
I bought this HP Split X2 about two months ago. When I am working on it, if I move and the screen moves ever so slightly back and forth, it will completely shut down. I have to adjust the screen to a angle where the power button will turn it on.
View 1 Replies View RelatedI am having an issue with my Acer Aspire V5-431P-4653 running Windows 8.1, namely, I cannot adjust the screen brightness at all. It seems to arbitrarily select a brightness level upon start up and from that point I cannot change it via the Fn and directional keys or through the control panel power settings. I have owned the laptop for a year and a half and this problem began roughly a week ago.
Of note, when I attempt to use the Fn and directional keys the brightness icon that pops up stays at the frozen brightness level - it does not move at all. In contrast, when I open the power settings and attempte to change the brightness from there, the brightness slider will move wherever I drag it, but the screen's brightness itself does not change. At startup the screen's brightness may be at full, minimum or somewhere in between - but regardless it will not adjust.
How can I adjust the brightness of my screen? I tried using f2 and f3 but no changes. HP 15-d024se.
View 9 Replies View RelatedI have a HP Envy dv7 Notebook PC. It recently just downloaded the new HP Assistant and I wanted to adjust the brightness because it was too bright for the dark room I was in. I tried using the F2 and F3 keys to lower the brightness and I tried to adjust it from settings and control panal but the brightness doesn't adjust when I move it up or down. I tried shutting down my computer and restarting it but I still can't adjust the brightness.
View 9 Replies View RelatedI have a HP 1000-1405TU Notebook PC. My Notebook Product ID is D9H61PA#UUF. I am using Windows 7, 64 bit version. I tried using the F2 and F3 keys to lower the brightness and I tried to adjust it from settings and control panal but the brightness doesn't adjust when I move it up or down. (Note. When I use Windows 8 on this PC then there is no problem like that).
View 3 Replies View Relatedthe contrast on my screen somehow got messed up and I can't find out how to adjust it.
View 9 Replies View RelatedI purchased an Acer Aspire V3-772G-9822 laptop in August 2013.I had the original unit exchanged by the retailer due to a faulty screen (green line running down the display).
I also had the mainboard replaced near the end of the warranty period due to an internal fault with the power supply [case #3414447U].
I am now just outside the warranty period, with (ostensibly) a new mainboard, and the unit will not boot .
I have tried the remove-battery-and-power-supply-and-press-button exercise (resetting the power management IC, I presume) - no success. I have checked / re-seated / removed any / all / each internal SATA drives - no success. I have removed the memory (unit off) to see if I'd get a POST beep error message - no success ...
I m using HP Pavillion N208TX with windows 8.1 64 bit version. i m not able to adjust screen brightness from f2 and f3 button and from the power setting also. when i press these buttons it shows the slider to adjust the brightness on top left corner of the screen but its does not adjust the brightness from low to high. i have already updated the Intel HD Graphic driver...
View 2 Replies View RelatedI just bought HP 14-g003AU Notebook PC.. but i have stucked to adjust screen brightness.. I installed Windows 7 64 bit OS..
My adjust screen brightness is missing.. I have tried to download VGA driver (AMD Catalyst). But it doesn't work either..
Uninstall Generic PnP Driver Moniter and install again.. not work
Uninstall Standard VGA Graphic Adapter.. and install again.. not work..
Try to update automatically Display adapter.. not work..
Update Windows 7.. Not work
Reformat OS.. not work.
Update LAtest BIOS.. not work ..
I bought new hp pavilion 15. i notice many time when i turn on or off my charger, screen turn off for few second then after few second screen turn on.
View 2 Replies View RelatedIt's a old version MacBook Pro 15.4" 2008 Edition, Core 2 Duo 2.5Ghz (i think) 2GB Ram, 250GB HDD
The problem I encountered was that one day when I was using my laptop I forgot to turn it off and then my laptop went to 'sleep' mode, when I came back and tried to turn on my laptop I could hear the sound but my display was black.
I thought it was just a minor problem so I just restarted my laptop but the problem consisted...
Unfortuately my warranty ran out but still I still put my laptop through the checkup in the official Apple customer center and they said that I needed to purchase a new part PCBA, MLB, 2.5 GHZ, REV2.
I was using the laptop normally in the morning and shut it down. When I turned on the machine at night, it started till the login screen and it just shutdown suddenly. When I tried to turn it on,there is no sign of life,no led lights,no power button light. Nothing
Its a V3-571G
If I plug in the charger the LED light turns on with orange and if I leave it, it will eventually turn blue. Yet will still not power up. I have a new battery for it. I have tried removing battery and letting it stand then hold power button for 1 minute then plugging in but that didn't work.
View 1 Replies View RelatedI have an acer aspire 5733-6838. When I log into laptop it may have black background and I have to restart to get it to blue and sometimes I log in I can't access some of my icons or files. Mainly microsoft office starter 10 files
View 1 Replies View RelatedI have an Acer Aspire v3-551g-8454 laptop. Lately it has been shutting itself off after anywhere from 5 to 24 hours of it being turned on. In the past I could simply turn it back on and resume from there. Now, when I try to turn it back on, the power button just flashes a few times and the laptop doesn't turn on. The laptop doesn't feel overly hot anywhere on it's surface.
View 3 Replies View Relatedhow can i fix acer aspire V5-572? it turns to blackscreen/blank screen after i've downloaded an application? i turn it off but when i tun it goes still the same..
View 1 Replies View Relatedour laptop keeps throwing a flakey when trying to install Win7 Ultimate over the current crappy Vista OS.
Laptop passed the compatibility checker no probs & has all the updates installed, but every time we try, we get either
1. windows 7 install failure message then black screen with cursor
or
2. straight to black screen with cursor.
This is even after changing to the low res setting that is mentioned so often when googling the issue.
I've looked on the Acer site, but it says if I got it from pc world I should take it up with them?
Anyone here have any advice to get it to work, or should we just smash the laptop off a wall?
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
My problem is that when i start up my Laptop (its about a week old) i just get a black screen and nothing else. The only way of solving this problem is to take out the power lead and the battery and start it up again. I dont want to have to do this everytime i start up my laptop.
This first happened after my laptop crashed (Frozen screen bussing through speakers) there was a lot running at the time, virus updates, windows updates etc.