Right I have a picture on my panasonic TV but no sound through HDMI i've installed different drivers countless times and i cant see any HDMI option in playback devices.
am i thick and loading the wrong drivers or is this just another problem with this laptop?
like a mouse that zips all over the screen whenever you try and move the mouse right it goes left....
win 8.1
In Windows 7 on my aspire 0722 I can find no tabs for playback - when I go the Sound settings my only option is the Conexant speakers in the netbook. I get great video though my hdmi cable. I have checked and I am up to date on my Win 7 updates. Is there some new driver download I should be trying?
View 2 Replies View RelatedI recently bought the Acer Aspire E1-432. It runs Windows 8.1. When I use HDMI to watch movies on my TV, the sound is not played by the TV but by the notebook. I looked on the internet for solutions for this problem and encountered two recurring possibilities.
1) Go to sound manager, show disabled devices and select the HDMI as main audio output.
When I go to sound manager and try the above solution, I can not select anything but the default audio. It does not matter if I plugged in the HDMI cable or not nor does it work to select the HDMI source on the TV. The option does not appear in sound manager.
2) Update the HD realtek audio driver.
I tried removing the driver and letting the notebook update the driver itself. Again it did not work. Secondly, I downloaded the newest version of the HD Realtek Audio Driver I could find (6.0.1.7027) and installed over the old version. Again, this did not work.
Any solution, applicable on this type of laptop, that might do the job?
By the way, chromecast works fine, using the same HDMI port. The cable works as well, for a different laptop of mine is able to produce audio with the exact same cable and same HDMI port.
im trying to setup my uncles new laptop but i couldnt get any sound to output over hdmi
i disabled the nvidia thing and realtek from the sound properties in control panel then couldnt find how ot make them reappear i managed to uninstall the realtek then restart and it installed it again so i got sound on the laptop
but the nvidia hdmi still hasnt reappeared
should i uninstall it too and hope it will reinstall it automatically
after that how do i make it output sound through the hdmi to his tv
I had tried that already, sadly still stale results with no change. Tomorrow I'm planning on buying different HDMI cables to see if it's a hardware issue, I don't want to take my computer in if it's happening to all three (I read somewhere that it may be the cord itself) .....
View 4 Replies View RelatedI can get a picture but not volume on my panasonic tv using HDMI cable. I have updated the audio drivers, but this still not has worked?
View 2 Replies View RelatedI just bought a Aspire E5-571G-583R and I'm trying to get 5.1 sound from it. I've connected the laptop HDMI to my home theatre system which supports both Dolby Digital and DTS, not working. I've also tried to my LG LED-TV which supports Dolby Digital, that's also a no go. I've installed the latest Realtek drivers from your download pages (6.0.1.7250). The problem, as far as I can tell, is that it uses the Intel display sound driver instead of Realtek HD sound driver on the HDMI port. I have tried to change the driver on the HDMI device to Realtek but then I got the win 8.1 version of the BoD.
So I guess I've two questions:
1. Is it possible to force the Realtek driver on the HDMI in order to get 5.1 sound?
2. If not, how do I get 5.1 sound from the laptop?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
Let's start off with: Acer Aspire V3-772G (Intel(R) ore(TM) i7-4702MQ CPU @2.20GHz, 8 gb Ram)
Regardless: After noticing a slight dip in preformance from games and use of my laptop in general so i decided to clean the fans. As this laptop is close to impossible to open up i decided to clean it the easy way, to blast compressed air directly into the fan in slow and infrequent blasts. After getting alot of dust out of the system i turned the laptop back on only to hear this "cd-reading"-like hissing from the left side of the laptop (where the fan is). Being worried i might have broken something i turned it stright off, and then on again realising there was not much i could do about it right now.
I am worried i might have spun the fan to fast, causing this, as the fan did not make this sound when i bought it new or before i cleaned it for that sake. It was bought online from a norwegian store (i currently live in norway) at 2014-08-18. I thought i would ask here before i contacted the store or support to see if this is just me over-reacting or if
After installing the 1.15 version of BIOS my FAN is working almost constantly. Is it any way to downgrade back to version 1.13? Will, f.e., complete reset to factory settings work?
View 4 Replies View RelatedI recently reinstalled windows 8.1 on my laptop as I had cloning problems with my new ssd (crucial mx100), reinstalling windows apparently solved the problem. I had problems with my display (brightness could not be adjusted) that was solved by installing intel's latest drivers using their app as device manager showed that it had the latest drivers. i only have one issue right now, the touch pad lost its multi-touch features and windows 8.1 gestures, is there anyway to fix this? I know it is probably a driver's problem....
My laptop is acer V3-772G-747A8G75MAKK.
I purchased an Acer Aspire V3-772G-9822 laptop in August 2013.I had the original unit exchanged by the retailer due to a faulty screen (green line running down the display).
I also had the mainboard replaced near the end of the warranty period due to an internal fault with the power supply [case #3414447U].
I am now just outside the warranty period, with (ostensibly) a new mainboard, and the unit will not boot .
I have tried the remove-battery-and-power-supply-and-press-button exercise (resetting the power management IC, I presume) - no success. I have checked / re-seated / removed any / all / each internal SATA drives - no success. I have removed the memory (unit off) to see if I'd get a POST beep error message - no success ...
I didn't upgrade my BIOS, it came with the latest BIOS because of the graphics card. The people that have fixed it by downgrading have a older version of the same laptop with a different graphics card.
View 2 Replies View RelatedMy Acer Aspire V3 772G that I purchased about 18 months ago is starting to behave quite strangely.
The machine has started to run more and more slowly. I have up to date Norton anti-virus, plenty of room on the hard drive, defragment the main drive and try to keep all software up to date.
The other, potentially related issue, I have is overheating. When I run certain online games the left side of the laptop get very hot and I have checked the temperature which get to about 100 degrees C and then the machine shuts down without any warning. I am already using a stand with a fan.
The only thing that I can think of that might be causing this is out of date drivers. When I check from the Device manager it says that all the drivers are up to date and this is confirmed when I look on the Acer site. However, when I go to the Intel site it says that there are more up to date drivers for the integrated graphics card. Should I ignore Acer's information and install the new driver?
I purchased my Acer Aspire 7726-9829 in August 2013 and haven't had any problems at all until a week and a half ago. When running games, it appears my computer is heating up and experiencing a hard crash. (This only happens when running games. Browsing the web or watching movies doesn't cause the problem.)
At first I thought it might be the power settings, so I picked up a new power supply and set my computer to 'high performance'. (Which fixed minor clipping issues. The graphics now run perfectly for about five to ten minutes before the computer crashes.)
Its super irritating that the charms pops up when accidentily touching the mousepad to close to the edge. My PC is not a tablet and why this is activated in the first place is to me sstrange. I want to completly remove all edge guestures on my mousepad. I have tryed to install the last driver because someone said that the option was added in the new driver, but no luck.
View 8 Replies View RelatedIts super irritating that the charms pops up when accidentily touching the mousepad to close to the edge. My PC is not a tablet and why this is activated in the first place is to me sstrange. I want to completly remove all edge guestures on my mousepad. I have tryed to install the last driver because someone said that the option was added in the new driver, but no luck.
View 8 Replies View RelatedI bought Acer Aspire V3-772G about a week ago. It was without an OS which I installed myself. First I installed win 7. When I was trying out new PES 2014, I had a problem with movement with arrow keys.
I mean no diagonally moving or anything. Only up, down, left, right. Laptop doesn't recognize multy pressed arrow keys. At first I thought it was an windows issue cause all drivers in Acer support page are for win 8. Installed win 8 and still same problem.
I have an Acer Aspire V3-772g, a relatively new laptop (8 months old), which randomly decided to stop booting.
Windows 8.1Core i7 2.2ghznVidia GTX 760m8gig's of ram (2x4gb)7200 RPM SATA
Was playing a game just fine. Shut down as normal, went to work, came home 8 hours later, attempted to boot - nothing.
Exact problem: Hit power button, power button comes on. Light next to the lightbulb (power light?) Comes on, stays solid. Charging stays solid orange/blue.
HDD light? Flickers. Screen flickers a dark grey color that may be the very initial part of a startup. No acer logo.The screen and HDD light flicker in synchronisation, at the same exact time. You can hear the fans fire up, and the HDD spin up. Screen just flickers about once per second (it's very faint.)
--Heres what I've tried---
-Removing power cord/battery, holding button for 60 seconds 3 times, plugging back in and powering up.
- Almost every varation of that, I have attempted.
-Inserting a new harddrive. Same result.
-Plugging in an external monitor. (Tried VGA and HDMI)
- Power does not transfer to external monitors. Screen still flickers on laptop, no change in behavior.
-Removed 1 stick of RAM - No **BUT** behavior changes slightly. Flickering of screen and HD light reduced to about once every 45 seconds rather than once every second.
-Removed both sticks of RAM - no flickering, no HDD light flickering. Pure black screen.
-Rotated the sticks of RAM - No change.
Also interestingly, with everything normal, if I hold Fn+Esc, the computer will do a new startup process (Screen still black), then after about 20 seconds goes into the normal screen flickering/HDD indicator flickering. Different behavior, slightly.
I have an Aspire V3-772G. I can't create a recovery drive anymore. I ran reagentc.exe in command-prompt and it's pointing to the correct recovery location, but Windows RE is disabled and for some reason I can't reenable it.
Here are some screenshots to describe the problem :
Acer Aspire V3-772G - BIOS setup utility menu items have disappeared
I have setup this brand new laptop, pre-installed with Windows 8.1, for my sister-in-law who bought it. The installation went well BUT the 16GB USB device which I purchased as advised by the Acer literature to store the recovery partition was not big enough, the physical capacity being 14.4GB. The Acer book says use a 16GB device or larger so I did. I naively thought that a USB drive which was labelled 16GB would be appropriate. Not so. I have had to buy a larger one but am still awaiting delivery.
I therefore decided to image the whole HDD to save the work I had done but found that the Acronis Backup and Recovery DVD would not boot. I went into the setup utility and adjusted the Boot settings to legacy and changed device priority. Acronis would not run so I did not continue. I went back into the setup utility, used F9 to restore the default and found to my astonishment that the DUAL boot option had now disappeared and the Windows Boot option had also vanished.
This means that this £800 laptop is now unusable. The setup utility self-reconfigured without warning. Nowhere is there any advice or warning not to use the setup utility in case it erases features which cannot be recovered by using F9 to recover the default configuration. If this is not a serious design fault, I don't know what is.
I am deeply worried because the idea of a BIOS setup utility behaving this way seems so improbable. How is it that the setup utility has been designed to self-harm like this?
Acer Aspire V3-772G - BIOS setup utility menu items have disappeared
I have setup this brand new laptop, pre-installed with Windows 8.1, for my sister-in-law who bought it. The installation went well BUT the 16GB USB device which I purchased as advised by the Acer literature to store the recovery partition was not big enough, the physical capacity being 14.4GB. The Acer book says use a 16GB device or larger so I did. I naively thought that a USB drive which was labelled 16GB would be appropriate. Not so. I have had to buy a larger one but am still awaiting delivery.
I therefore decided to image the whole HDD to save the work I had done but found that the Acronis Backup and Recovery DVD would not boot. I went into the setup utility and adjusted the Boot settings to legacy and changed device priority. Acronis would not run so I did not continue. I went back into the setup utility, used F9 to restore the default and found to my astonishment that the DUAL boot option had now disappeared and the Windows Boot option had also vanished.
This means that this £800 laptop is now unusable. The setup utility self-reconfigured without warning. Nowhere is there any advice or warning not to use the setup utility in case it erases features which cannot be recovered by using F9 to recover the default configuration. If this is not a serious design fault, I don't know what is.
BIOS setup utility behaving this way seems so improbable. How is it that the setup utility has been designed to self-harm like this?
I recently reinstalled windows 8.1 on my laptop as i had cloning problems with my new ssd (crucial mx100), reinstalling windows apparently solved the problem. i had problems with my display (brightness could not be adjusted) that was solved by installing intel's latest drivers using their app as device manager showed that it had the latest drivers. i only have one issue right now, the touch pad lost its multi-touch features and windows 8.1 gestures, is there anyway to fix this? i know it is probably a driver's problem but i can't really find them in device manager and if you can post the link of the drivers.
My laptop is acer V3-772G-747A8G75MAKK.
I've been having problems with this device since the day I bought it. The second day I owned it a bad pixel jumped onto the screen. After pushing it for some time physically on the surface of the screen it dissapears for another day or two.
But my biggest problem is taht sometimes touchpad simply stops responding to any gestures or mouse cursor keeps shaking on my screen. The only ting I can do is turn off the whole touchpad and wait for it to repair itself.
Also it happens that for no apparent reason my notebook behaves like as if I had been pressing CRTL button all the time, while I dont do it at all. Pressing S key alone makes it run into save options. Left clicking on the page makes it open in a new bookmark.
Everything was fine till I formatted my HDD and installed Windows 7 (wanted to try it).
I have a HDMI cable from my laptop Aspire 5738ZG to my PHILIPS HD Ready TV. Now the picture shows just fine but I've got no sound at all on my TV.
I have tried reinstalling a lot of drivers without success . If anyone knows what's causing this problem please tell me, as I really want sound on my TV while watching movies etc.
I have a Ferrari 5004wlmi running vista business and have just bought a Sony KDL40V4000 40" LCD TV. I had great plans of plugging the notebook into tv with HDMI cable to watch movies etc. I can get picture on the TV but no sound. I did a bit of hunting round the web and found this is a pretty common problem. But, for me i am yet to find a solution.
I tried updating my audio drivers from the Realtek website but i wasnt really sure which one to install, they have just updated their website with quite a few and i dont know the correct one for this notebook. I emailed them asking for help but they have not replied. I have emailed Acer but got a reply that did not help at all.
In my readings i see that by right clicking on the speaker icon in taskbar then 'playback devices' I should be able to select HDMI cable but i do not get this option; only "Speakers" and "Realtek Digital Output". If i select the digital output option and cross my fingers, touch wood and hold my tongue in the right position i do sometimes get sound coming through the TV.
Seems to be quite a process for it to work though; i turn tv and notebook off, plug hdmi into notebook, turn on tv, turn on notebook, then about 15 seconds before vista finshes starting up i select HDMI on tv and if i am very lucky the sound will work, if it doesnt i restart notebook and then it may work or it may not.
This seems really fickle to me which makes me think something needs fixing. Even if everything is plugged in and working but then i leave it for awhile or watch normal tv then try the notebook again the sound will be gone again.
I see there was a HDMI update on realtek which i installed but it said no driver was supported once it had finished installing, i had the hdmi cable plugged in at the time.
What are the correct drivers to download from Realtek for a Ferrari 5004?
Why do i not get the option for HDMI cable on 'playback devices' do i need it?
Should i really have to go through the above procedure for things to work correctly or should i just be able to plug notebook into tv at any stage?
has anybody else had a crackling sound when playing sound example music/games. i always get it in my right speaker and how can i fix this i believe this is a software/hardware issue as whenever the sound goes off the crackling deaseses.
View 7 Replies View RelatedWhen I plug the computer into my Philips HDTV via the HDMI cable (a cable I know is perfectly good and undamaged), the video pops right up onto the TV. The edges are cut off but I know why that is.
The audio is another matter. The TV says it doesn't have any audio coming in, at all. So I check the Sound applet under Control Panel, to see what it's got to say. Under Sound, I see three devices:
Speakers - RealTek High Definition Audio (this is the computer's built-in speaker)
NVIDIA HDMI Out - NVIDIA High Definition Audio
Realtek Digital Output - Realtek High Definition Audio
The default is the speakers, and when I plug in the HDMI cable the computer automatically switches to the nVidia HDMI out. When I play something out (I've tried both Winamp and Windows Media Player), the VU meter next to the selected device bounces up and down as if there's sound playing. Yet, despite the volume being near maximum on the TV, there's no sound.
I've tried switching from the nVidia option to the RealTek option. I've tried restarting. I've tried updating the drivers to all the current versions. Nothing works. This is a Windows 7 Ultimate x64 installation.
i have a Acer Aspire 8920G and on the side there is an port with the name "HDMI" . If i plug a HDMI cable in from my Ps3 would my screen work as monitor ? so is the HDMI an input or (and) output
View 5 Replies View Related