Its super irritating that the charms pops up when accidentily touching the mousepad to close to the edge. My PC is not a tablet and why this is activated in the first place is to me sstrange. I want to completly remove all edge guestures on my mousepad. I have tryed to install the last driver because someone said that the option was added in the new driver, but no luck.
View 8 Replies
Its super irritating that the charms pops up when accidentily touching the mousepad to close to the edge. My PC is not a tablet and why this is activated in the first place is to me sstrange. I want to completly remove all edge guestures on my mousepad. I have tryed to install the last driver because someone said that the option was added in the new driver, but no luck.
View 8 Replies View RelatedLet's start off with: Acer Aspire V3-772G (Intel(R) ore(TM) i7-4702MQ CPU @2.20GHz, 8 gb Ram)
Regardless: After noticing a slight dip in preformance from games and use of my laptop in general so i decided to clean the fans. As this laptop is close to impossible to open up i decided to clean it the easy way, to blast compressed air directly into the fan in slow and infrequent blasts. After getting alot of dust out of the system i turned the laptop back on only to hear this "cd-reading"-like hissing from the left side of the laptop (where the fan is). Being worried i might have broken something i turned it stright off, and then on again realising there was not much i could do about it right now.
I am worried i might have spun the fan to fast, causing this, as the fan did not make this sound when i bought it new or before i cleaned it for that sake. It was bought online from a norwegian store (i currently live in norway) at 2014-08-18. I thought i would ask here before i contacted the store or support to see if this is just me over-reacting or if
Right I have a picture on my panasonic TV but no sound through HDMI i've installed different drivers countless times and i cant see any HDMI option in playback devices.
am i thick and loading the wrong drivers or is this just another problem with this laptop?
like a mouse that zips all over the screen whenever you try and move the mouse right it goes left....
win 8.1
After installing the 1.15 version of BIOS my FAN is working almost constantly. Is it any way to downgrade back to version 1.13? Will, f.e., complete reset to factory settings work?
View 4 Replies View RelatedI have a Acer Aspire 5590 and where my mouse pad is the left button ( left click ) is broken like it moves and doesn't click properly. I was wondering if you guys know how I could fix this or get a new button?
View 6 Replies View RelatedI recently reinstalled windows 8.1 on my laptop as I had cloning problems with my new ssd (crucial mx100), reinstalling windows apparently solved the problem. I had problems with my display (brightness could not be adjusted) that was solved by installing intel's latest drivers using their app as device manager showed that it had the latest drivers. i only have one issue right now, the touch pad lost its multi-touch features and windows 8.1 gestures, is there anyway to fix this? I know it is probably a driver's problem....
My laptop is acer V3-772G-747A8G75MAKK.
I purchased an Acer Aspire V3-772G-9822 laptop in August 2013.I had the original unit exchanged by the retailer due to a faulty screen (green line running down the display).
I also had the mainboard replaced near the end of the warranty period due to an internal fault with the power supply [case #3414447U].
I am now just outside the warranty period, with (ostensibly) a new mainboard, and the unit will not boot .
I have tried the remove-battery-and-power-supply-and-press-button exercise (resetting the power management IC, I presume) - no success. I have checked / re-seated / removed any / all / each internal SATA drives - no success. I have removed the memory (unit off) to see if I'd get a POST beep error message - no success ...
The right click button does not work on the mouse pad, as well as on a usb mouse. I have used Acer factory recover disks to restore it to out of the box condition. Same issue. If you use control panel to switch buttons then the only thing that happens is the cursor moves no click at all. Also after a period of time letting the computer warm up suddenly the cursor is working but even the left click will not function it will highlight the icon but not allow you to click it. I am wondering is the only solution to replace the motherboard since it appears to be a heat aggravated problem. And before I forget, yes I have replaced the drivers a couple of times clean install as well
View 1 Replies View RelatedI didn't upgrade my BIOS, it came with the latest BIOS because of the graphics card. The people that have fixed it by downgrading have a older version of the same laptop with a different graphics card.
View 2 Replies View RelatedMy Acer Aspire V3 772G that I purchased about 18 months ago is starting to behave quite strangely.
The machine has started to run more and more slowly. I have up to date Norton anti-virus, plenty of room on the hard drive, defragment the main drive and try to keep all software up to date.
The other, potentially related issue, I have is overheating. When I run certain online games the left side of the laptop get very hot and I have checked the temperature which get to about 100 degrees C and then the machine shuts down without any warning. I am already using a stand with a fan.
The only thing that I can think of that might be causing this is out of date drivers. When I check from the Device manager it says that all the drivers are up to date and this is confirmed when I look on the Acer site. However, when I go to the Intel site it says that there are more up to date drivers for the integrated graphics card. Should I ignore Acer's information and install the new driver?
In Windows 7 on my aspire 0722 I can find no tabs for playback - when I go the Sound settings my only option is the Conexant speakers in the netbook. I get great video though my hdmi cable. I have checked and I am up to date on my Win 7 updates. Is there some new driver download I should be trying?
View 2 Replies View RelatedI purchased my Acer Aspire 7726-9829 in August 2013 and haven't had any problems at all until a week and a half ago. When running games, it appears my computer is heating up and experiencing a hard crash. (This only happens when running games. Browsing the web or watching movies doesn't cause the problem.)
At first I thought it might be the power settings, so I picked up a new power supply and set my computer to 'high performance'. (Which fixed minor clipping issues. The graphics now run perfectly for about five to ten minutes before the computer crashes.)
I can not control the screen scroll with the mouse pad. I is very distracting to complete any task. How to lock my screen.
View 1 Replies View RelatedI bought Acer Aspire V3-772G about a week ago. It was without an OS which I installed myself. First I installed win 7. When I was trying out new PES 2014, I had a problem with movement with arrow keys.
I mean no diagonally moving or anything. Only up, down, left, right. Laptop doesn't recognize multy pressed arrow keys. At first I thought it was an windows issue cause all drivers in Acer support page are for win 8. Installed win 8 and still same problem.
I have an Acer Aspire V3-772g, a relatively new laptop (8 months old), which randomly decided to stop booting.
Windows 8.1Core i7 2.2ghznVidia GTX 760m8gig's of ram (2x4gb)7200 RPM SATA
Was playing a game just fine. Shut down as normal, went to work, came home 8 hours later, attempted to boot - nothing.
Exact problem: Hit power button, power button comes on. Light next to the lightbulb (power light?) Comes on, stays solid. Charging stays solid orange/blue.
HDD light? Flickers. Screen flickers a dark grey color that may be the very initial part of a startup. No acer logo.The screen and HDD light flicker in synchronisation, at the same exact time. You can hear the fans fire up, and the HDD spin up. Screen just flickers about once per second (it's very faint.)
--Heres what I've tried---
-Removing power cord/battery, holding button for 60 seconds 3 times, plugging back in and powering up.
- Almost every varation of that, I have attempted.
-Inserting a new harddrive. Same result.
-Plugging in an external monitor. (Tried VGA and HDMI)
- Power does not transfer to external monitors. Screen still flickers on laptop, no change in behavior.
-Removed 1 stick of RAM - No **BUT** behavior changes slightly. Flickering of screen and HD light reduced to about once every 45 seconds rather than once every second.
-Removed both sticks of RAM - no flickering, no HDD light flickering. Pure black screen.
-Rotated the sticks of RAM - No change.
Also interestingly, with everything normal, if I hold Fn+Esc, the computer will do a new startup process (Screen still black), then after about 20 seconds goes into the normal screen flickering/HDD indicator flickering. Different behavior, slightly.
I have an Aspire V3-772G. I can't create a recovery drive anymore. I ran reagentc.exe in command-prompt and it's pointing to the correct recovery location, but Windows RE is disabled and for some reason I can't reenable it.
Here are some screenshots to describe the problem :
Acer Aspire V3-772G - BIOS setup utility menu items have disappeared
I have setup this brand new laptop, pre-installed with Windows 8.1, for my sister-in-law who bought it. The installation went well BUT the 16GB USB device which I purchased as advised by the Acer literature to store the recovery partition was not big enough, the physical capacity being 14.4GB. The Acer book says use a 16GB device or larger so I did. I naively thought that a USB drive which was labelled 16GB would be appropriate. Not so. I have had to buy a larger one but am still awaiting delivery.
I therefore decided to image the whole HDD to save the work I had done but found that the Acronis Backup and Recovery DVD would not boot. I went into the setup utility and adjusted the Boot settings to legacy and changed device priority. Acronis would not run so I did not continue. I went back into the setup utility, used F9 to restore the default and found to my astonishment that the DUAL boot option had now disappeared and the Windows Boot option had also vanished.
This means that this £800 laptop is now unusable. The setup utility self-reconfigured without warning. Nowhere is there any advice or warning not to use the setup utility in case it erases features which cannot be recovered by using F9 to recover the default configuration. If this is not a serious design fault, I don't know what is.
I am deeply worried because the idea of a BIOS setup utility behaving this way seems so improbable. How is it that the setup utility has been designed to self-harm like this?
Acer Aspire V3-772G - BIOS setup utility menu items have disappeared
I have setup this brand new laptop, pre-installed with Windows 8.1, for my sister-in-law who bought it. The installation went well BUT the 16GB USB device which I purchased as advised by the Acer literature to store the recovery partition was not big enough, the physical capacity being 14.4GB. The Acer book says use a 16GB device or larger so I did. I naively thought that a USB drive which was labelled 16GB would be appropriate. Not so. I have had to buy a larger one but am still awaiting delivery.
I therefore decided to image the whole HDD to save the work I had done but found that the Acronis Backup and Recovery DVD would not boot. I went into the setup utility and adjusted the Boot settings to legacy and changed device priority. Acronis would not run so I did not continue. I went back into the setup utility, used F9 to restore the default and found to my astonishment that the DUAL boot option had now disappeared and the Windows Boot option had also vanished.
This means that this £800 laptop is now unusable. The setup utility self-reconfigured without warning. Nowhere is there any advice or warning not to use the setup utility in case it erases features which cannot be recovered by using F9 to recover the default configuration. If this is not a serious design fault, I don't know what is.
BIOS setup utility behaving this way seems so improbable. How is it that the setup utility has been designed to self-harm like this?
I recently reinstalled windows 8.1 on my laptop as i had cloning problems with my new ssd (crucial mx100), reinstalling windows apparently solved the problem. i had problems with my display (brightness could not be adjusted) that was solved by installing intel's latest drivers using their app as device manager showed that it had the latest drivers. i only have one issue right now, the touch pad lost its multi-touch features and windows 8.1 gestures, is there anyway to fix this? i know it is probably a driver's problem but i can't really find them in device manager and if you can post the link of the drivers.
My laptop is acer V3-772G-747A8G75MAKK.
I've been having problems with this device since the day I bought it. The second day I owned it a bad pixel jumped onto the screen. After pushing it for some time physically on the surface of the screen it dissapears for another day or two.
But my biggest problem is taht sometimes touchpad simply stops responding to any gestures or mouse cursor keeps shaking on my screen. The only ting I can do is turn off the whole touchpad and wait for it to repair itself.
Also it happens that for no apparent reason my notebook behaves like as if I had been pressing CRTL button all the time, while I dont do it at all. Pressing S key alone makes it run into save options. Left clicking on the page makes it open in a new bookmark.
Just purchased a new Acer laptop: ASPIRE 5740-6378
This is the first laptop, I ever seen that has this much software installed by the manufacture Acer.
I have the following groups
Acer
Acer Arcade Deluxe
Acer GridVista
AcerSystem
Acer Welcome Center
Egis Software
Launch Manager
NewTech Acer Backup Manager
I just want to know which of these can I uninstall?
Has anyone got a process and/or pictures of how to remove the DVD drive from an Aspire series notebook? Most other laptops ive seen are just a slider or single screw but seemingly not that on this model.
Ive even gone as far as removing all the screws on the underside but it still doesn't loosen the drive.
I want to remove it to clean and check another model drive to see if its a drive fault or not and if there is a fault replace.
i have the acer aspire e1-510 with linux, how do i remove linux and install windows ?
View 1 Replies View Relatedi have the acer aspire e1-510 with linux, how do i remove linux and install windows ?
View 1 Replies View RelatedI bought a new HD for my Acer Aspire 7520-5971 but I couldn't figure out how to remove the old one...
Here's a picture if it helps:
I did removed all the screws that are shown in the picture, but it is still attached to something.
I just purchased an Acer E511 laptop with windows 8 and am wondering if the acer recovery management program can be removed. I noticed that when I go into settings, change pc settings, I can recover using windows 8. Will this option be removed if I uninstall Acer Recovery Management? What's the difference between the two?
View 3 Replies View RelatedI have screen flickering problem with my Acer Aspire 725 with windows 8 OS. Flickering stops when i remove the power supply. I could see the battery plugged and unplugged symbol in Windows 8 continuously. Whether i should replace my battery or power supply adaptor?
View 1 Replies View RelatedThe mouse part of it works perfectly, as does the right clicker - but the left one is completely useless, which isn't good as that's the most important one.
I noticed this a few weeks ago that it was no longer as 'secure' as the right one, i.e. is seemed to be giving way on one side of the left clicker, and was moving about a bit in it's place. Now it's gotten progressively worse and no longer is able to click even, so it doesn't work and I have had to plug in an optical mouse to the usb port.
I lifted the little mouse clicker slot up with a knife to see what is wrong but all that seems to be the problem is that it is incredibly loose and no longer sits straight in its positioning. Underneath both clickers there is a small button attached to the mainboard and obviously the clicker needs to touch this to perform its' actions. But the left one doesn't seem to be reaching..
So basically I want to know is it likely that Acer would repair this for me? The laptop is still under warranty.
I guess the only long-term solution is an entire new mousepad, which would be expensive.
And that'd suck because 3/4 of it works perfectly and it's just this one button.
My acer loaded in xp as normal but my keypad and mousepad were unresponsive so i did a clean install with xp(not acer recovery) that ran through to when you do user input and froze again now i have a new hd and the same thing is happening except when i load into safe mode then everything is fine,
View 4 Replies View Related
