I go to store to update to windows 8.1 it says I need to update important updates first so I go to settings into change pc settings etc etc and it never finishes updating the updates.
View 1 Replieswhen my computer boots up it says "automatic repair" then it says "diagnosing your pc" then it goes from the logo screen to a blue screen that says "automatic repair" it gives you options and plenty of them but none of them work for my notebook computer. im starting to think of just throwing it away because it cannot be repaired and i dont have a warranty on it anymore in order to send it in. even if i did have the warranty it would take months to get back to me. so.....anyways ive tried command prompt to somehow reset it to factory defaults but i do not know how to do that. when i click on refresh your pc it says "there was a problem with refreshing your pc." and then when i click on "reset your pc" says "there was a problem resetting your pc" ....
View 1 Replies View RelatedBought this notebook on Oct.30/14. Used it this past Friday; was working fine. Plugged it in for the night and the next day, I noticed the fan was running and I wasn't able to boot it. It won't shut off using the power button on side. The only way to shut it off was by using a paper clip on the reset on the bottom of the notebook.
View 3 Replies View Relatedi have an acer aspire v5 122P. all of a sudden the keyboard has or is not responding that is unless you hold the relevent key down for what seems like minutes certainly cant type normal speed.
View 1 Replies View RelatedMy Acer is detetecting my home wifi but cannot connect. I have the laptop just over a year and this problem has just cropped up.
It detects iPhone hot spot and connect to that.
There is no issue with the home wifi as other devices are coneecting without issue.
My laptop touch screen doesn't work consistently. my laptop suppose to have "full windows touch support with 10 touch points", but then when i checked out my pc info, it says "limited only".
View 3 Replies View RelatedI was given a laptop aspire v5-122p and the ALT+F12 for internal recovery is not working. The hard drive and partition seems corrupted and damaged. Windows 8 try to start but a message says there was something wrong and that it will try to fix fit but it restart and do the same in a loop. I scanned the hard drive with an application that let me run it from a usb bootable flash drive. The hard drive came with sector errors.
If i install a new hard drive, can i order an erecovery disc and install everything or do i have to do something special? i read somewhere that clean hard drives need to be prepared first with another set of tools provided by Acer. The tools provided in the link are in an ISO named "Format CD".
I'm trying to reflash my BIOS from a USB stick to save a dead Aspire V5-122P. All I find is that I should extract the BIOS files found on the Acer website and load the resulting .fd file onto a USB.However, as my laptop is dead I have only a borrowed MacBook to work with, and none of my efforts to unzip the .exe file to its constituent parts have been successful. What is the BIOS files available for the V5-122P can be extracted, and if not tell me if there's any other way to find the correct files to reflash the BIOS?
View 1 Replies View RelatedI have an Acer Aspire V5 122P-0408 notebook. I am considering upgrading the 5400 rpm hdd inside to an ssd. I will also be buying a new copy of Windows 8.1 to install. I have version 2.04 of the bios now. The latest bios version is 2.12. I was wondering if I would be able to install an ssd and 8.1 without updating the bios as I don't want to accidentally brick my laptop.
If not, would updating the bios fix any compatibility issues or add any new improvements?
My acer aspire v5 - 122p went through an automatic update recently after it powered back on it never booted past the initial Acer boot screen I eventually did a hard resetbut now the screen stays completely black the fan is on the blue lights are on but nothing else. From what I have read online you can flash the bios but the file I have downloaded on the Acer website does not match any of the tutorials I have read or watched.
View 7 Replies View RelatedLast night I was using my laptop and it had about an hour of battery left when I put it in hibernate. Today, I tried to turn it on and absolutely nothing happened at all.
I tried taking the battery out, hard drive out, and the CMOS button battery out and leaving it for about half an hour. Put it back together again and nothing. I've had it plugged in for a while and the charge light is on, but it's not turning on still...
(Windows 8.1)
In admin mode my hard-drive password is locked. My Acer is an eBay refurb w/ out warranty. What are my "free" options?
View 1 Replies View RelatedI have an Aspire V5-571G... I updated to Windows 8.1 (64bit) a few days ago.
Since the update, when playing audio on iTunes (was 11.3 but now updated to 11.4 both post win 8.1 anyway)/Windows Media Player and on YouTube & other sites, audio has stopped working completely or become extremely distorted. Sometimes it works fine but never for extended periods of time. I'm not sure what triggers the distortion and silence but it has ONLY been happening since the 8.1 update.
I updated the RealTek sound drivers with the driver for my model from the Acer website and it has not improved the situation. I've been looking around for a solution / cause of the problem and the only questionable driver I have is this: There's no update for this on the Acer site r.e. my model and the Windows online update thing cannot find an update either.
If it's not possible to fix this via updating or tweaking 8.1, is it possible to do a system restore back to Win 8 without removing my files and if so how?
I cannot turn off my acer laptop since windows 8.1 update.. whenever i do shutdown, it simply just restart after shutting down.. i dont know how to turn off my laptop.. also sleep and hibernate seems not functioning, in a couple of seconds it awakes again..
I tried the every thing about the power management to untick something about fast startup.. still no luck
And i forced to shutdown my laptop during startup but it cause me a problem.. It wont power on.. and it seems dead but when i plug the power adapter the battery is charging but no signs of powering up(no power led, just battery led) whenever i press the power button.. i tried dispersing the static electricty but no luck.. the only option that solve my problem on not powering up is to disassemble my laptop and remove cmos battery. then i assembled it back.. it shows 1 blink of power led whenever i plug in the ac adapter without the laptop battery plugin.. and then it powers up again after i press the power button.. what a relief.. but it doesnt fix my shutdown problem..
the only thing i havent tried is BIOS update.. but im having problem right now..
i tried last year to update my BIOS after that it went wrong the black "screen of death" they call.. so i sent my laptop to service center.. and it fixed!..
I tried lately to update my BIOS but it says that i have already an updated BIOS version 2.19.. i guess this is the bios version installed by service center.. how can i apply the BIOS posted on ACER website with the latest version 2.15?
If i want to turn off my laptop, i simply close the lcd monitor to remain it in sleep mode..
I have a new aspire E1-572G that won't shutdown completely over an update to windows 8.1 ... I've Updated the Bios and downloaded the drivers from the support site.
I've done a recovery to default factory settings and tried again......no luck
I installed windows 8.1 after i installed al windows updates.
After upgrading to Windows 8.1 x64 bit, my bluetooth is not detecting and cannot be detected by other devices (my mobile phone). In device manager, I have NO yellow triangles with exclamation marks, when I search automatically for updates, windows says everything is up to date (see picture below) so everything seems fine and running. Bluetooth is on but after searching does not find devices (even if the phone is also on bluetooth).
View 9 Replies View RelatedMy daughter's Acer is 2.5 years old and it's running Windows 7. She recently rebooted it last week for a Windows Update and since then it starts up but hangs, with the hard drive light blinking slowly. I ran it in Safe Mode and it gets through CLASSPNP.SYS then hangs. According to articles this is usually a hardware problem. The only option I have with this OS is to bring up the Command Prompt. I've tried System File Checker - no go. System Repair comes back with unknown error and what looks like a bad Driver.
I was able to build a new partition (100+GB) and do a clean install of Windows 7 x64 Ultimate w/ SP1. This went through fine, though I would have to load the Acer drivers for the network card, etc. to finalize it. The point here is that this shows that the hard drive isn't the issue.
My fear is that Windows installed either some sort of driver or other update that has now caused the current OS on her laptop to be unusable. I went to do a System Restore and the only restore point it had was the Critical Update that she rebooted to on 2/13. Trying to roll back to that Restore Point didn't work.
an Acer Aspire 5570z was gifted to me by my father and I own it since 1.5 Year and it works cool, the notebook came with 512MB RAM and I updated it to 512x2 a year back and every thing worked cool, but now, I finally decided to buy a 2 GB RAM, I bought a 2 GB DDR RAM and inserted in my laptop, the laptop works good but problem is that now when I go to CMOS setup, it shows up as Extended memory to 2048MB but I own Windows Vista Ultimate (French) 32BITS ; but my Windows only shows up as I have only 1.00GB of memory!
why my memory RAM is not being showed in Windows?
The following is an assessment of Acer Aspire 8942G models available for pre-order, as of 11-27-2009.
Presently, I know of no information regarding U.S. distribution, but it only stands to reason this will shortly follow. Question is, how will U.S. models be configured? Looking back at the distribution of Acer's 8940G, the U.S. only received one variant, the Aspire 8940G-6865..... and this was only a base model. Hopefully the U.S. will see a better showing in the 8942G series.
The German models are the only variants currently touting the highly anticipated, ATI Mobility HD 5850 graphics solution, with a complete list of configuration. I have asked the German resellers for confirmation on this, and they assure me the information is correct..... as given to them directly from Acer. I guess we will know the answer to this shortly, as they are soon to be released.................
I am looking for the following bios:
Acer Aspire 5310, Intel 27A0 rev 3, 2008-12-08, v1.50
Do you have any idea where to get this, who to ask? Acer does not list it, does not respond properly and I could not find anything in the forum here.
I have no issues whatsoever with this laptop, but just saw that there is a newer version of the BIOS available from Acer. Should this be updated? What precautions should I take before doing so?
View 4 Replies View RelatedI have an Aspire 7720z. As Vista was having so many glitches, I set up a dual boot system with XP and Ubuntu 8.10 on two partitions on the same drive. Last week I upgraded Ubuntu to 9.10 but started having power problems. I read somewhere that a BIOS update would help so I flashed to v1.45. Everything is now going great with my Ubuntu OS. The problem lies in Windows. When I try to boot to XP the splash screen comes up for a couple of seconds and the the computer reboots. I used a test disk to check the drive and everything is fine. I then tried to repair the XP installation with the install disk but was told that it couldn't find an XP installation. So, for the umteenth time, I tried to re-install XP but was told that the installer couldn't locate any devices to install onto. Completely bewildering as my Ubuntu installation works perfectly.
View 5 Replies View RelatedI've got an Aspire 5920G with an ATI Mobility Radeon HD 3470 graphics card/chipset. Up until last week, I'd been running with whatever drivers had been installed when I originally purchased the laptop in October last year.
Vista's Windows Update told me of new drivers for the 3470 that had been released in January, so I promptly downloaded them, glad to have something a little more up-to-date, since the laptop is being used frequently as a lightweight gaming machine. The driver, according to Device Manager, is dated 15/01/2009, and is version number 8.580.0.0.
My problem now is that every time I boot the machine, an ATI warning appears reading the following:
"The Catalyst Control Center is not supported by the driver version of your enable graphics adapter. Please update your ATI graphics driver, or enable your ATI adapter using the Displays Manager."..................
regarding the OS intermittently crashing on startup and keyboard/ touchpad not working - Basically, when the machine boots up, XP will load but then freezes when I try to open applications (I.E. for example) and I have to reboot. Now, the keypad has stopped working (although it works in safe mode).
So, I formatted the HD, used the recovery disks to reload winXP and everything appeared to work - except when I tried to install SP2. All other updates install OK but when SP2 installs and my laptop reboots, it gets caught in a rebooting loop and won't load. I read somewhere that this can happen if the Bios is out of date. My problem is that I'm nervous about using the updated bios I downloaded from Acer's site as I've heard it can go wrong and kill my motherboard plus the fact I don't know how to use the programme I downloaded from Acer (Winphlash).
My Acer Aspire 5517 Laptop is running Windows 7 X 64 with an AMD Athlon TF-20 Processor at 1.6Ghz with 2GB of physical memory. Every once in a while, and lately quit frequently, my screen goes black, and it will not boot...I have attached an exterior Monitor to it, with no success, so I assume it is not the video portion. To get it to boot I turn it off and on until it re-boots. Sometimes it reboots quickly and at other times it takes several minutes...up to 20 or 30 sometimes. I have run a disc check to see if all the sectors are good on the hard drive. It checks out okay..I thought if the BIOS was out of date, I would update it, to see if that work....
View 2 Replies View RelatedI have an Acer Aspire 5100
AMD Turion 64x2 Mobile Technology TL-56, 1.8 GHZ
Radeon Xpress 1100 hyperMemory
1 GB DDr2
It has vista home premium preinstalled. Lately I installed Xp on it (Ive done it many times before because its faster) The only thing is that with Xp it shutsdown after some time, 'cuase of the heat. So I thought I'll update the BIOS. It went well but then IT shutsdown! I was afraid of this but it happened. Now my Lap won't boot, nothing comes up, not even a sound! The only thing that work is the dvd driver. The fan goes like it would boot but nothing. I tried to flash it via usb but didn't read the usb.
I attempted to update the BIOS in my Acer Aspire 5315 laptop to no avail, the winbios program froze straight away, while erasing the BIOS I think. So since then I havn't been able to start the laptop, no fans, but does blink a red LED beside the little light icon when left for longer than 10 seconds or so when you press the power button. I've tried the fn+esc method to boot it to flash the bios but nothing at all, tried it with USB and CD-ROM. I've tried removing all the hardware and starting it, I've also tried resetting the CMOS, still no luck.
I'm thinking that the red LED might be a little indicator of hope, or is it maybe the capacitor filling up
how can i update bios of mine laptop.mine laptop model no is acer aspire 4750
View 1 Replies View RelatedI updated my Acer Aspire 4752g's BIOS to use the BIOS_Acer_2.10_Windows.zip in the BIOS downloads in the Acer site and when my laptop rebooted it was stuck in a black screen. I've tried doing the FN+ESC and tried all the BIOS downloads in the Acer site but it still did not work.
View 3 Replies View RelatedI own an Aspire V3-571G Notebook with ArchLinux dual-booting Win8.1. When I'm starting Arch I get this (Ivybridge-/Sandybridge -related) error:
"[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun"
After research I think a BIOS Update should fix the problem. But in the BIOS-section there is a confusing line:
"BIOS - UEFI for Windows 8 (Not for Upgrades)"
So, does that mean:
a) not for those who had Win8/8.1 pre-installed (like me) or
b) not for those who have run an inplace upgrade of Win7 to Win8/8.1 instead of a clean install.