I have a 5810TZG basically it has an INTEL 4500MHD and a ATI HD4330 , I did a search and found only 2 other TZG results.
I bought a 5810T with only the INTEL 4500MHD , but returned it for a more powerful gpu.
So what does the Z in TZG mean.
What other versions are there.
Also the switchable graphics only work with the Acer drivers, I have tried v9.12 and above and get a blank screen unless i select dedicated ati only in the bios.
So it looks like we are stuck with catalyst v8.65 if i want switchable graphics or are we?
The Travelmate business line of computers that are based off of the Timeline series have discrete ATI Mobility Radeon™ HD 4330 graphics cards. I think there are even some models in the European market that have the ATI graphics card.
Do you think it would be possible to install a graphics card like the HD 4330 into a 3810T (13.3" Timeline) or a 4810T (14.1" Timeline) notebook?
Is it even possible to do this with any notebook?
I'm leaning towards a 4810T as my first choices (the Asus P30A and Acer Travelmate 8371) have not been invited to the Canadian market. The only thing that holds me back is the integrated graphics card. Should I hold my breath and wait for a Timeline notebook with a discrete graphics card?
Why would Acer be reluctant to release a Timeline esque notebook in North America with a discrete graphics card? The ATI card doesn't suck up that much power.
Version with Intel/Ati/Switchable options in Switchable Graphics menu: ftp://ftp.ad1ced.ru/JM31.127_SLIC.zip
Extended version with additional unlocked options: ftp://ftp.ad1ced.ru/JM31.127_SLIC_ad1ced.ZIP
Don't forget to change User Access Level to see all options
advan20092 is AWESOME!
Just to explain how awesome this modded BIOS is: It enables a new INTEL-ONLY graphics setting in the BIOS for the TG models. This disables the ATI chip entirely, basically making the Switchable Graphics TG models act like the T models, which "fixes" the bug where both graphics chips are active after a Resume from Standby.
This gives 3810TG owners the promised battery life of 8+ hours. One caveat - it disables the HDMI port. For HDMI you have to use Switchable or ATI-ONLY modes.
i turned my new travelmate 8471 into a brick by flashing it with the wrong bios (shame on me ) - now i am looking for a way to bring it to life again - any suggestions? Its really bad that it happened 3 days after i got it and i have no idea because these models are quite new to the market - acer support also didnt give feedback yet -
One is marketed as business-grade, another is consumer-grade. Both look very similar and I am not sure if the materials used are any different. So tell me, as I am preparing to buy my next laptop.
I even bought this cute Razer mouse hoping their drivers would disable mouse acceleration. Logitech drivers are useless, by the way. Never install them.
The Razer drivers even have a box for 'acceleration', but it appears to toggle between 'less acceleration' and 'a lot more accleration'. I submitted a spport ticket with Razer, but do any of you have a suggestion? For the record, I've tried Steermouse, USB Overdrive. Neither completely disables mouse acceleration, regardless of what their options imply. After a lot of testing, there still exists a noticeable amount of mouse acceleration no matter what drivers/programs I use.
downside though, when i use it with my logitech vx (800dpi) the distance needed to travel across the screen is so huge i will need another desk just for the mouse! it become natural however when i am on my lachesis with driver settings done in windows. sure i don't get all the buttons configured, but at least it is finally decent, besides the wheel(click) and the two buttons, there are 2 responsible for changing profiles, 2 for dpi adjustment and one more for expose
restart computer and there you go. as long as you don't touch the mouse speed setting the status is maintained. you might want to have a gaming mouse though
I am considering a new notebook in a month or two. and the Macbook Pro is in my list. I am wondering if the GeForce 320M has been benchmarked, and if it's signifcantly better than the 9400M GT, and if it can handle StarCraft 2 and maybe some acceleration in FireWorks and Photoshop?
The most glaring omission for OpenCL is for desktops with ATI GPUs, namely the HD 2400XT, HD 2600Pro, HD2600XT, and HD3870. Now it's not like these GPUs can't support GPGPU operation since they already do so in Windows under ATI's own CTM and Brook+ language.
ATI's OpenCL drivers for Windows should be available soon, they were promised for H1, and if it turns out the HD2xxx and HD3xxx series is capable of supporting OpenCL but only in Windows and not OS X it'd be very disappointing. Somehow I don't think Apple envisions iMac users having to use Boot Camp to use OpenCL accelerated apps.............
this thread is for all Acer Timeline owners who suffer from 100% CPU load, when only thing that helps is restart.
1. If you are a Timeline owner - having this problem or not, please do report here, what model you own and tell us how is this happening for you.
2. Please inform Acer about this, so they know and can offer a solution (especially if you're from United States as this will have greater impact rather than me telling this stuff to Slovak Acer service)
Alright, this is what I got so far about this thing: -CPU will just go nuts at no specific time (idle, browsing, ...) -Proccess explorer shows 'Hardware Interrupts' as source of 99.9% of CPU power -unlogging won't help, only restart does -updating BIOS doesn't help -uninstalling acer epower managment doesn't help, even though it seems making these episodes less frequent somehow
Mine notebook is: 5810T with SU3500 and GMA 4500MHD.......................
My 4810T has the fan always on (not too loud, but on nevertheless...). I can't tell if it's because of the CPU (intel SU9400) or the GPU (intel gma 4500mhd).
Is there any option where I can control this? I'm on Ubuntu and I'm using the "CPU frequency scaling monitor" applet to throttle the CPU, but even in it's lowest frequency, the fan never shuts down.
I had installed Windows 7 and it was working fine but it blue screened and now it won't start. Fine, I decided I'd just reinstall it but if I put my flash drive in it will just stick at the Acer Empowering People splash screen and won't move for a while and then just goes to a screen about something being not connected and then it'll boot to the normal start Windows Recovery (Which doesn't work) and start Windows normally. If you try to start it normally it'll either stay on the Windows animation starting or get to login and then i'll input my password but it goes to Blue Screen.
I formatted the flash drive using this guide [url]
I've tried having USB FDD and USB HDD as the first boot option and still nothing.
I was looking at the Acer Timeline 3810t and I am thinking about purchasing it because the battery life is great and so is the performance. Yet, the one thing I found that may hold me from purchasing is the stiff mousepad buttons brought up in many reviews. I was wondering if anyone who has this laptop has experience with the touchpad buttons. Are the really stiff that it would annoy someone who uses their laptop on the go without an external mouse?
I uninstalled all the extra software that this laptop came with. One problem i am having is every SECOND start up, the computers loads very slow. The next time i turn on the laptop it will load really fast and all the icons and stuff will pop up right away. Then the next time it will be slow again, windows load then only the wallpaper visible, the icons on desktop and the start bar is not there for about 2 mins.
I tried to restart and i noticed it is always on the second start up.
Also i tried to format my laptop with XP on a usb stick. When i get to the set up, it can not detected the harddrive but only the usb stick.
I recently bought the sony vaio z620 (canadian) [url] and according to the website it says that it has 256mb dedicated video memory and max is 1500mb but when i go to display settings>advanced settings> it says that I have 128MB dedicated video memory and the max is 1372mb. is it supposed to be like this? also, does this even make a lot of difference?
I'm looking at getting the Timeline 4810t with either the SU2700 or SU3500. Can anyone tell me any discernible differences I'll find between the two? Right now I'm looking at about an $80 difference between the two (also 1gb more ram with the SU3500).
Also, fyi this laptop will be for law school so it won't be very task intensive besides internet research, word processing, onenote etc.
computer beeps everytime the adapter gets taken out and plugged in. I tried lowering the volume, turning the sound scheme to no sound. But the beeping still happens.
I've previously had good experiences with HP until their past few models which have been a nightmare for a long, long list of reasons. But this post isn't about HP it's about Acer. This is my first Acer product and I've had a very positive response to the quality of their design but a very poor experience with the quality of manufacturing.
The unit I purchased is the Acer Aspire Timeline 4810T (1.4Ghz, 4gb, 14", 320GB WD) from Staples (US retailer) for the bargain price of 544.98 USD.
The most attractive aspects of the 4810T includes:
* The battery (wow!) * The excellent, bright LED screen * Fantastic keyboard (the fn key is to the right of ctrl, perfect!) * Synaptics touchpad (the best) * Super quiet fan even when playing games and doing heavy processing * Decent speakers (dolby) with great sound through headphones * USB ports on both sides
Some of the less attractive aspects include:
* Keyboard audio functions seem to rely upon software instead of hardware and can fail during heavy processing or if the OS hangs * As a single piece of platic instead of separate buttons. The touchpad button only works on the edges with the center being "dead" * No dock * No expansion slot * The speakers beep loudly when power is connected/disconnected if the speakers are on (annoying) * The wireless light blinks during activity instead of just being on or off (annoying) * The screen hugs the keyboard too closely creating key-shaped oil deposits on the screen (not uncommon but undesirable and a source for damage if something hard like a grain of sand is on the keyboard)
I have a 4810T (SU3500) and the wireless connection is giving me some issues. After a suspend or restart the wireless connection does not reconnect properly. Sometimes the icon says I'm connected but there is no data transfer. I have to disconnect/reconnect or turn off/turn on the wireless via the touch sensitive button. Once I do that the wireless connection is rock solid.
I'm using the newest Intel drivers and Bios version 1.23
