i take this JoyWarrior [url]
and connect it to the free mini PCIe connector
works great with NFS Most Wanted or WipeOut3 with pSX emu!
damm small these soldering pads.......
i took 5V from USBport on the Left
H.264/AVC graphics acceleration in the series timeline.
Download Media Player Home Cinema
Download Haali Media Splitter
Extract the zip and open the Media Player application.
Install Haali Media Splitter.
Open Media Player Home Cinema
Go to options, "Output" and leave it:
"Internal Filters" as follows:
"External Filters" add filters --> browse --> seek program files --> CyberLink --> PowerDVD --> VideoFilter:
Filters external brand preference. Thus:
OK and close the Media Player.
Open a movie while playing and right click the touchpad, filters, Cyberlink H.264/AVC Decoder (HD264), tick "Use DxVA" and accept.
Close the Media Player to save the changes and reopen the same movie.
All this assuming that I installed Cyberlink PowerDVD.
I have a T500 (LENOVO 2081CTO ThinkPad T500) running W7 32 bit. Been working fine since September 10. Today when simply trying to logon the fingerprint sensor has stopped working. Laptop had not even been moved, simply resting on desk and then switched on from powered off.
A few times since have received message that "USB device is being installed" with finally "USB Device could not be installed. There is a problem with your device." Device Manager showed a problem with "USB Composite device"
Powered off/on gave same symptom.
Downloaded & installed latest fingerprint software 7wf162ww.exe. Installed OK. USB device appeared to then automatically pick up and reinstall correctly. BUT still unable to use fingerprint to logon or for with Thinkvantage Client Security.
Using Thinkvantage Lenovo Fingerprint Software gives error "Cannot communicate with sensor. Please confirm the sensor is ready."
I've also noticed the keyboard around the fingerprint sensor is very warm, almost hot. As if it is being constantly turned on?
Fingerprint sensor is AuthenTec Inc. AES2810
Is it possible to have both ssd and hdd? Ok there is not enough room for both, but, beside that, could it be possible to use at the same time ssd and hdd?
Like ssd for os, and hdd for boot? Doesn't the mobo have 2 sata channel?
Btw could be a nice idea to use the pcie expansion slot where to put a 1.8 sized drive...
I recently bought a N-wireless gigabit router. It is DLink DIR-655. It is reporting the connect to my 1810T AGN wireless is using G. I'm wondering why if my computer supports N and the router supports N, why am I not getting N?
When I checked properties of my wireless card in my 1810T it tells me it is a Intel WiFi Link 5100 AGN. If I check the properties and it shows N is enabled. However, under Wireless Mode it is set to 802.11a/b/g. Also, while there are several options that include a, b, and g, there is no option for N.
I actually have a Gateway EC1815U and heard it is identical to the acer 1810t.
In the Gateway bios (insyde) I see an option for a device on IDE1. IDE0 is used for the internal hard drive.
I am wondering if there is either
1- a way to expose the 2nd IDE externally to use like a eSATA device with it
or
2 - Be able to install a 2nd IDE device like a SSD to use that interface
I'm wondering out loud and checking here to see if anyone can offer some advice.
I just bought an 1810T two days ago. It is suppose to have an 8+ hour battery. However, with the setting on Power Saver it is the BatteryBar utility is telling me 6 1/2 hours after a full charge.
View 5 Replies View RelatedWould a CL4 ddr2 800 be a noticeable upgrade compared to CL6 ddr 800? Could I see a performance improvement?
View 4 Replies View RelatedI've found out that the webcam is a Suyin, I installed drivers from acer website.. and the result is still terrible.
The webcam is so slow, like 1 fps. Even when not in videocall and using acer crystal eye webcam to set it, it's slow, pixelated and sloow.. I don't mind about the colour, yellowish but adjustable, but I do mind about the fps and quality.
I guess it's a driver matter, because the driver installed is the microsoft's standard one. But I couldn't manage to get better results, also some of the settings like auto and white balance or camera control are not selectable.
i need to know a thing befor buy my new m4400..
I saw that there isn't any tv-out port in the note.. only a vga out and displayport adapter.
But if i want to connect my note to a normal tv with a SCART adapter.. usually, with my note.. i've a S-VIDEO port with an SCART/S-VIDEO adapter, and i link tv and pc..
But how can eith m4400??
And for the audio.. with my actual note.. my headphone port is an S/PDIF port.. and i can connect, with optical cable my note to my digital ampli..
After a few days of happy 1810T ownership, the computer has begun to have a problem where the screen locks up tight. Nothing revives the computer except holding the power button down to force a powerdown. It reboots OK but shows the screen to optionally boot into Safe Mode.
The screen is a random color when this happens: sometimes green, blue or red. It is NOT the traditional "blue screen of death".
At first I thought it was due to some problems I was having with a conflict between The KM Player and Adobe Flash (as detailed here and here, for example). Luckily I had done Acronis 2010 images at each step of the way in the "new notebook" process:
- image made right out of the box by booting from Acronis disc first, before ever running Win7 on the computer (I call this the "Day 0 Image")
- image made after doing Windows Updates, Windows Security Essentials, installing apps (KM Player, IrfanView, FireFox, etc) and user data
Thinking the problem was due to the KM Player conflicts, I restored the computer back to when there was no KM Player, i.e. out-of-the-box Day 0 Image. This went fine and Acronis worked smoothly.
I did the Windows Updates but did not install any apps or user data... and the screen lockup still happens! Sometimes it happens soon after login, other times things run OK for a while first.
I am really concerned about this. If I can't rely on the computer to not lock up regularly, it is essentially useless to me. I am very surprised to see the problem even after an "out of the box" disk restore.
Any suggestions? Even if you don't have knowledge of how to deal with this problem specifically, do you know where else I can ask? What will Acer's take on this be? I am afraid they will just pass it off as "user error" and leave me stuck...
To Add:
1) I can't remember if this has happened only when on battery, or also when plugged in. I will check and see if it happens in both modes. If it only happens when on battery, at least that shows a path forward.
2) I have not tried to restore via the Acer eRecovery DVDs yet, though I don't know why this would be any better than the Acronis 2010 Day 0 image. I was in the process of burning the first Acer recovery DVD last night when... the screen locked up!
3) I have emailed Acer Support about the problem, though I suspect they won't trust Acronis 2010 and they'll tell me to restore via Acer eRecovery DVD...
I'm looking at picking up an AS1810T to replace my Samsung NC10 netbook and my HP DV8230US laptop.
I was looking at an MSI earlier due to its better warranty (3 years) and better price ($450 as opposed to $600)...but unfortunately, the lack of VT on the T6600 is a deal-breaker.
Does Acer have Virtualization enabled on the AS1810T? The SU7300 has it, but I want to make sure that there's nothing else that would prevent me from being able to use the laptop properly...as VMWare and XP Mode are requirements for what I'll be doing with it.
just got my son the 1810TZ and reinstalled with Win7 64Bit Ultimate.
I now cannot get the wifi to work no matter what. Thoughts? Is it an Atheros? I have installed the atheros package as well as all other drivers that say wifi with no luck...keep getting network cable unplugged and in system properties it identifies a network controller to which there are no drivers installed...
I thought Win 7 would pick up all poss hardware for the most part. I never had this prob on my 1810T-6188.
My Acer 1810T has Windows 7 Home Premium x64 installed and it is using a Microsoft Webcam driver version 6.1.7600.16385 dated 6/21/2006.
On Acer's site, they list 3 Camera drivers for Windows 7 Home Premium x64:
Chicony - 1.1.95.71
liteon - 0.905
Suyin - 5.2.7.1
I put on cpu-z ( I got the crappy ram like some of the others) but what I thought was odd that it said FSB was 800 and multiplier was 8 and indicated my CPU was running at 1.6Ghz. Is this an error on CPU-z?
View 4 Replies View RelatedI have a utility reccommended here called BatteryBar. It has a category called Battery wear. What is battery wear? Is it as it sounds, a degradation of the maximum potential of a battery over time? Is there particular actions that cause an increase in battery wear?
I have a 1 week old Acer 1810T. Up until now the battery wear has been 0.0%. However, I let the battery run down to the point that the computer shutdown. I thought this was a good thing. I know in the old days batteries would develop a memory. They recommended a occasion full run down and charge. I think I read this is not true for the Lithium battery, however.
Well, after restarting my computer I see my battery wear is now at 1.4%. Is this because I let it run down? Also, if I want to my battery to last as long as it can, is it better to take it out when using it at home on AC power? That is about 90% of my usage.
Is it adviceable to delete the old preinstalled partition just to install w7 ultimate?
I have on HDD 12GB of recovery partition, 100MB of system , and 280 of OS.
What would you do.. erase all and proceed with new fresh W7? Is it risky?
I got my new 1810T and after opening it up, the first thing I noticed was that the touchpad buttons are not even.
By "even" I mean they're not level with each other. The left button sits a little higher on its right side and the right button sits lower on its left side.
Anyone else experience this? Is this something that has a simple fix like the double-sided tape for the mushy keyboard?
Also, I went into the device manager, opened up the monitor properties and when I choose "Hardware Ids" it shows this:
MONITORCMO1100
What type of panel do I have?
I've got an odd problem - my iPhone neither charges nor is recognised by USB2 on my 3810T. Tried same lead and phone on desktop and other PCs no problem. I'm running Windows 7 home premium 64 bit on both laptop and main PC.
My normal iPod classic connects and charges fine via the 3810T as do other peripherals like the external DVD-RW and memory sticks. Sony Ericsson mobile phone connects and charges too.
Can anyone explain this or has anyone either had the same problem or have connected successfully with an iPhone?
I am trying to send my video signal from my laptop to my analog tv. I have a Inspiron 1520 laptop with a NVIDIA GeForce 8600M GT video card.
I hard wired the laptop and TV with yellow composite cable with an s-video adaptor (composite on tv and s-video on laptop).
When I try to setup for multiple displays I choose CLONE, but there is only a multiple selection option in the pulldown for LAPTOP DISPLAY AND HDTV.Can I not display image on my analog tv?
None of the keyboard functions work including F12. When I plug it into a monitor it says analog mode and goes to sleep.
View 1 Replies View RelatedWhere is the sensor that senses when the lid is closed on the laptop? It hasn't worked properly since I got my laptop back from Acer repair a year ago.
View 10 Replies View RelatedOn my acer 5920g, I've installed XP and all drivers without problems, but my sensor keypad does not work like media buttons, but just like single click on touch pad. Which driver I've miss? I've also installed lounch manager driver and nothing happens.
View 4 Replies View RelatedI have the Asus PVR and have a bunch of movies in H.264 format. Can anyone tell me if they play well on the 1410. I will buy the 1810T if I have to but the 1410 fits my pocket better and if it does everything I need it to I can live with the minus 2 hours on the battery.
View 8 Replies View RelatedI've noticed our new 1810T's arrow and PageUp/PageDown keys often don't respond to presses, specifically when pressed higher on the key (along the upper border as someone says in one of the 1810T owner threads). This ends up happening quite a lot the way I situate my hands over the keyboard and the touchpad, and is a serious issue for me since I'm using these keys a lot in the development environment I use. As referenced above I've seen a few mentions of this issue on the forum, but no clear confirmation whether it is normal for the 1810T. Can anyone with a 1810T out there verify whether their unit exhibits this issue?
View 6 Replies View Relatedis it possible to overclock this version of 1810T?
I've read about a mode to apply, but it was for SU3500, I dunno if it's needed also for SU7300.
Second question, is: this Kingston Hyperix 2x4GB 800MHz memory at 4-4-4-12 timings compatible with this laptop?
I am looking at replacing my 1810T bilingual keyboard with a US version very soon and am trouble finding any info or disassemble guide with respect to that model.
View 8 Replies View RelatedUPDATED FOR UBUNTU 10.04 LUCID LYNX
Here it comes, updated guide for Lucid.
Packard Bell / Gateway clones:
This guide has also been tested on a Packard Bell Dot M/U with bios v3303, and it should also work on the Gateway clone. If you have a 1410/1810 and something doesn't work, please report back.
What's working after a standard Ubuntu 10.04 install:GraphicsAudio out, speaker mutes when pluging in headphones. Good volume.Networking, both wireless (intel wifi 1000) and wired (the atheros gigabit)FN +:F4, suspends fineF6, monitor goes blackF7, touchpad on / offF8, muteF9, Bloq NumRePag: HomeAvPag: EndUp: increase volumeDown: decrease volumeRigh: increase brightness: skips steps.Left: decrease brightness: skips steps.J,K,L, etc: numeric keyboard ok.What's not working:Audio in: the integrated mic doesn't work.FN + F5: not recognised, doesn't toogle displaysAutomated Install (recommended): I've done a script that should do it all automatically. In detail:
What the script does:Configure gnome-power-manager backlight dim and hard disk power savingDownload, patch, install and setup acerhdfInstall the power saving scriptInstall the debugging scriptIf laptop-mode-tools is installed, suggest uninstalling and, if you want, uninstallFix the brightness hotkeys issue (jumps 2 levels on every key press)Disable ethernet Wake on Lan (doesn't enable when on AC)Disable uneeded services: cron, anacron and atd (they don't enable when on AC)What the script doesn't:Add the noatime parameter to the ext2/3/4 partitions in fstab. You'll have to do it manually.How it works:In a terminal, run ./InstallAcer_11.6_PowerSaving.sh --help to get a full list of options.If you want to install everything: ./InstallAcer_11.6_PowerSaving.sh --installDisclaimer:This script comes with no warranty. Use it at your own risk. I won't be responsible for any damage this could do to your system or data.Manual Install:
Power saving tips:The Script:By default, an ubuntu install won't take too much care of saving power, which is very important in an ultra mobile laptop. You can easily setup the system to enter some power saving modes, specifically the sata controller and the sound chip......................
I recently bought 1810T. It has W7 ultimate 64bit and 3303 bios installed. Unfortunately there is the issue that battery is discharging for about 5-8% per day when laptop is off (shut down).
I've disabled all "wake on" properties in network adapter driver properties but
unfortunately it does not help.
I was thinking of picking up a 1810T with an SU7300 and 4GB DDR2; I want something portable, good on battery, and for (very) light gaming.
How would the 4500MHD handle KOTOR, WarCraft III, or TorchLight? These aren't very demanding games and I was hoping to be able to play them on the go...
Honestly, the 1810T is a very nice little system!