I have Acer Aspire 5720 and originally Win Visa is installed on it.
The problem is that I don't like Win Vista at all and I want to change it to Win XP.
But most of the drivers I found online are ONLY for Win Vista so I'm not sure if those drivers will work correctly on Win XP.
I have the acer aspire 5315 and want to change from Vista to XP pro. How do I do this? I have an XP disc. Do I just put it in the cd-rom? Do I need to install extra drivers, and will the computer except this?
View 6 Replies View RelatedI have an Aspire 5315-2875 notebook that came with Vista and I wondered if this notebook could be changed to xpsp2?
I did this with my Travelmate 2480-2153 and have been very please with it. I have the Vista CD that I can upgrade to when I feel that there won't be difficulites with a couple of my programs and now the better half is wondering is this can be done with the newly acquired Aspire.
I have an acer aspire 5720 and was wondering how to oc it. ive been searching all day but cant find any decent information.
View 11 Replies View RelatedI've an Aspire 5720-602G16Mi which has no installed bluetooth module, but has the button fitted in the keyboard (comes up with "NO BLUETOOTH DEVICE"). I've seen all the threads on this and obtained the correct module (and driver if required) and know where on the motherboard to fit it - near the front of the laptop - probably socket BT1, so here's the problem!
I can't get the bottom off the case to access the right spot! :-(
I've taken out the battery, removed the 2 access plates - (I know how to remove the keyboard and the hard drive if neccessary) -BUT even when I've then taken out ALL of the visible screws I can't get the bottom of the case off.
AM I MISSING SOMETHING?
I realise there are "clips" all round the base but I also know that it's a fragile plastic so I don't want to force anything.
A step by step guide or a link to an existing one would be useful ( there may be one here but I can't find it)
To find all the drivers that are needed if I were to reformat my Acer Aspire 5720-6113 notebook?
I looked on their website and they have like 4 of each driver and I have no idea which ones I would need to download.
I am on Windows Vista Home Premium.
i would like to know the significance of the second set of numbers on this computer....acer aspire 5720-4230. what is the 4230? im thinking of getting this laptop for my college kid. ive found some pretty low priced ones. im more concerned with dependability than looks or speed.
here are the specs on it:
Network Acer InviLink Wi-Fi IEEE 802.11b/g
Gigabit Ethernet IEEE 802.3ab
Processor Intel Pentium Dual-Core T2330 1.6GHz
Hard Drive 120GB
Manufacturer Acer, Inc
Ports 1 x DC Power Input
1 x RJ-11 Modem
1 x RJ-45 Network
1 x VGA
1 x Mini-phone S/PDIF/Audio Out
1 x Mini-phone Microphone
1 x Mini-phone Audio In
1 x mini-DIN S-Video Out
1 x IEEE 1394 - FireWire
4 x 4-pin Type A USB 2.0 - USB................
I have aspire 5720 bought in 2007. It stopped suddenly. On pressing power button start up light comes on which stays about 5 sec and switches off. Tried with and without battery but same. Fan starts and in a se laptop is off. I have removed HDD and put it back and same to ram. Also did power reset by holding on power button for a minute without battery plugged in but no luck.
View 8 Replies View RelatedI got a laptop today and it has Vista on it.can i format the harddrive and put in Windows xp.is it possible or would it be hassle?
View 10 Replies View Relatedwhether the AC power adaptor itself should show an LED light on while it is plugged into the power (and not just when it is charging/connected to the laptop too)?
My Dad has come over here on holiday with an Acer Aspire 5720 Model ICL50. It had been working fine, however this morning we started getting the low battery warning sound, despite the power cable being plugged in. We have taken plugs in and out, taken the battery out etc, but the laptop will show no sign of receiving more power via the adaptor.
I figure its either one of two things - either the adaptor has died, or there is an issue with the power connector in the back of the laptop itself, perhaps it got knocked and damaged internally or something.
I restored my Acer Aspire 5720 laptop using the factory restore DVD . I used to be able to press Fn+MJKLUIO78, or Fn+9 to type the numbers 012345678, or 9 while holding the Fn key.
After I finished restore the laptop to the factory image, the Fn+M...9 keys didn't work anymore.
Instead of mapping the keys to 0..9, it mapped the keys to Home, Up, PgUp, Left, Right, End, Down, and PgDn.
So for example, if I press Fn+L, instead of "3", it gave me "PgDn". It was giving me "3" before I restored the factory image.
So recap, I used to be able to hold Fn and I could type the "blue" letters printed on the keyboard.
I don't think this is Vista problem because I boot the laptop to DOS, the keyboard mapping is the same.
I think when I press Alt-F10 to run the recovery, I must have pressed some other hidden key sequence to switch the keyboard profile by accident.
I have the 9600m GT out of a 8930g installed in my Aspire 5720 laptop but every nvidia driver that I try to install says that the hardware is not compatible with the driver or some crap.
Am I out of luck with this card or is there a way to force install a driver...or is there a better driver to install?
I've tried the latest 197.16, 186.03 drivers from nvidia. Even from laptopvideo2go...no dice.
Firstly I apologize if this has been asked earlier, but I couldn't find an answer to my question. I have a 1530 on order. The OS will be Vista Premium x86. There are 2 things I need to do-
1. Upgrade the HD from a 5400 to a 7200, I have the HD.
2. Install Windows Vista Business - I have an original retail version, and I absolutely need this.
I have the Vista Business Retail DVD. What I want to do is have Windows and the dell partitions configured exactly as they came with the original computer, only with Vista Business, and on the new hard disk. I don't want to alter Media Direct, or delete the restoration partition. Everything should be the same except the Windows Versio
I'd like to change the CPU in my Acer Aspire 5534. It has a 1.2g AMD dual core at present with 4g memory. It's a nice refurbished machine I didn't pay much for. Came with W7 64.
Video is a little jerky. Would like to change CPU if possible. I'm proficient with that type thing.
I have ACER ASPIRE 5670, and i want to change its HDD but im not sure about what to take instead. I found this WD 500gb
"Western Digital Caviar Blue 500 GB Bulk/OEM Hard Drive 3.5 Inch, 16 MB Cache, 7200 RPM SATA II WD5000AAKS " but im not sure will it work or not? how can i know if my HDD is SATA or SATA-II or IDE?
I modify the value of "localy administrated MAC" in the broadcom 802.11g wireless adapter properties.
But when I ask Windows the mac address, it shows me the original MAC of my adapter.
the OS is Vista Home Premium(32 bits) and I have the latest driver.
I have a problem with my laptop, is an acer aspire 5672wmli, the model with 1gb of ram.
The drive is a Matsushita UJ-845-S, when it was new it had a firmware version 1.00 and they gave me some incompatible problems with some media, so i decided to flash with a newer version, 1.02 and after that the drive work well but I was unable to did the boot from cd.
The firmware page is this:
[url]
The firmware 1.02 is for toshiba OEM and this is why it give me this problem.
So now wath I can do, I send an email to acer-support but they want only that i send to acer but i must pay because is my fault .
My question is, I see some internal dvd drivers for notebook to buy, so I can buy one and replace with my?.
All internal drives can work fine if I replace or i must see some technical caractheristics?
I have two aspire one running XP and one is very slow. I switched the HD and the problem remains with the notebook. I did upgrade the BIOS to the latest one, no change.
What I found is that the ATA/ATAPI controller is set to MODE PIO on the slow notebook and I cannot change it to ULTRA DMA. When I change the driver to the right one then at startup I need to get back to the previous correct configuration as oit will not load windows..
I've been losing date and time recently. I update files, then take them home on a USB flash drive and they appear to be older than what's at home. Turns out my date and time are maintaining. I have to reset date and time when I boot up now. Pretty sure I need to swap out the CMOS battery (maybe a CR2032?) how to find it once the case is opened?
View 1 Replies View RelatedAcer Aspire V3 731 intermittent display shut down, causing me to do a hard shut down. Display comes back on reboot.
I have run memory and gpu tests showing good results.
Thinking I need to change allocated share of RAM in BIOS up from 128. Cannot access that field. Cannot find internet solution to get to that field. Thinking perhaps setting it to 256 or 512. Do not game on this computer. Do not do heavy post processing of images. Do multi task.
Is this intermittent shutdown of the display a known issue?
My brother just bought an Acer Aspire 3680.He purchased 1 gig of DDR2 Memory from Crucial. When we get to the desktop the screen is fine at first then the screen goes off and back on with 8 bit display. 512 DDR2 came in the machine. Crucial site said he could mix memory sizes. I tried it with the 1 gig stick by itself in case the mixed memory was the problem. Same thing..I've tried 2 sticks of 512...same thing. I've tried 2 sticks of 1 gig each..same problem. This laptop won't allow any upgrade at all. Will only run correctly with (1) 512 stick. I've never seen this problem before. I've installed many memory sticks in computers. This is a first for me. What could be causing this?? Any advice would be appreciated. BTW. the computer shows the upgrade amount of memory but the display color keeps changing to 8 Bit! I change it back to 32 and it reverts back after a few moments to 8 Bit. I went to Acer and installed an updated driver for the Intel Graphics card thinking the driver would help. I haven't installed a bios update yet. Called Acer and they said to return it for repair.
View 4 Replies View RelatedI own a 3.5 years old Acer Aspire 5742G (Core i3 M380; NVIDIA540M). the heat sink or the collinig fan might have some issue as it usually gets overheated when playing games (even CS condition zero/1.6). I don't play games anymore, so its not a problem.
The problem is that I am unable to adjust the screen brightness from the keyboars shortcut (Fn+ Left/Right arrow key), neither from the control panel (Power Settings).
Although I do noticed something that, if I change my brightness settings (nothing happens) and I close the laptop lid (display screen) by folding it down and openeing it back after 3-4 seconds, the brightness is now changed.
I have a Acer E5-511 model and I need to install win 7 on it.But when we change the mode from uefi to legacy and reboot the system ,auto no display coming .Only display came in uefi mode.
View 1 Replies View RelatedI currently have a: Acer Aspire E
Model Name: Aspire E5-511-P2D6Part Number: NX.MNYAA.002
Windows 8.1Intel Pentium N3530 Quad-core (4 Core) 2.16 GHz15.6" HD (1366 x 768) 16:9Intel HD Graphics with Shared Memory8 GB, DDR3L SDRAM1 TB HDD
Is there a way that i can change my video card memory. It says im using 32MB but my maximum is 1792MB. How to I make it run at 1792MB?
Screen automatically dims as I go in little dark areas and gets too bright when it has so much light around it. I am trying Fn+ arrow keys but they make very less difference. Is there any way to control this?
I am using Windows 8.1 and display drivers are Intel HD Graphics Family version 10.18.10.3316.
The pop-up window reads:
"WARNING! Please boot this Recovery Disc using legacy BIOS mode"
Please boot this Recovery Disc using legacy BIOS mode"
when I switch it to Legacy BIOS, then the pop-up window reads:
"WARNING! Please boot this Recovery Disc using UEFI BIOS mode"
I have tried secure boot enabled and disabled.
What do I do to restore my computer? I don't have Recovery on my PC. It was lost with the WIN8.1 upgrade.
Acer Aspire v5-571p
Just setting up a new Aspire E5 for my girlfriend and can't see how to change touchpad options (eg sensitivity, scrolling settings etc). On my own acer V3 571G from the basic mouse options I can go into "elan" to change various options but don't seem to have (or can't find) this option on the new E5...
View 3 Replies View RelatedMy Aspire E15's brightness is locked at maximum capacity. I can't change it in power options or with the Fn key. It is the same whether connected to the AC adapter or not. While using the Fn key and pressing Fn+Left Key or Fn+Right Key, the on-screen brightness indicator alternates between two levels but the brightness of the screen doesn't change.
View 3 Replies View RelatedOn my new Aspire Switch 10 SW5-012 with Windows 8.1 I am unable to change the size of the onscreen keyboard. Microsoft cannot answer and refers to Acer support. Is there a solution to that?
View 5 Replies View RelatedI chose the colour orange while going through the personlization part of the setup after turning on my laptop for the first time. Is there anyway I can change it to red?
View 1 Replies View Related