I have the 9600m GT out of a 8930g installed in my Aspire 5720 laptop but every nvidia driver that I try to install says that the hardware is not compatible with the driver or some crap.
Am I out of luck with this card or is there a way to force install a driver...or is there a better driver to install?
I've tried the latest 197.16, 186.03 drivers from nvidia. Even from laptopvideo2go...no dice.
The Nvidia driver for my Inspiron 5720 does not recognize my card and won't install. It is the 630M.I did a clean format and set BIOS values to default. The latest BIOS is installed.The drive is from Dell's website.
View 7 Replies View RelatedWhile installing the Wireless Lan Broadcom 802.11 driver I get the error: Update.cpp 1185. The machine is an E1-532P and this is the only driver which has a problem. Broadcom.com does not provide support for end users.
View 5 Replies View RelatedI have Accer aspire e1-571 i want to know abaut base system device, i have installed all drivers in my laptop but base system device driver pending i want to knw how to install it. os win 7 pro 64 bit
View 8 Replies View RelatedI have an acer aspire 5720 and was wondering how to oc it. ive been searching all day but cant find any decent information.
View 11 Replies View RelatedI've an Aspire 5720-602G16Mi which has no installed bluetooth module, but has the button fitted in the keyboard (comes up with "NO BLUETOOTH DEVICE"). I've seen all the threads on this and obtained the correct module (and driver if required) and know where on the motherboard to fit it - near the front of the laptop - probably socket BT1, so here's the problem!
I can't get the bottom off the case to access the right spot! :-(
I've taken out the battery, removed the 2 access plates - (I know how to remove the keyboard and the hard drive if neccessary) -BUT even when I've then taken out ALL of the visible screws I can't get the bottom of the case off.
AM I MISSING SOMETHING?
I realise there are "clips" all round the base but I also know that it's a fragile plastic so I don't want to force anything.
A step by step guide or a link to an existing one would be useful ( there may be one here but I can't find it)
To find all the drivers that are needed if I were to reformat my Acer Aspire 5720-6113 notebook?
I looked on their website and they have like 4 of each driver and I have no idea which ones I would need to download.
I am on Windows Vista Home Premium.
I have Acer Aspire 5720 and originally Win Visa is installed on it.
The problem is that I don't like Win Vista at all and I want to change it to Win XP.
But most of the drivers I found online are ONLY for Win Vista so I'm not sure if those drivers will work correctly on Win XP.
i would like to know the significance of the second set of numbers on this computer....acer aspire 5720-4230. what is the 4230? im thinking of getting this laptop for my college kid. ive found some pretty low priced ones. im more concerned with dependability than looks or speed.
here are the specs on it:
Network Acer InviLink Wi-Fi IEEE 802.11b/g
Gigabit Ethernet IEEE 802.3ab
Processor Intel Pentium Dual-Core T2330 1.6GHz
Hard Drive 120GB
Manufacturer Acer, Inc
Ports 1 x DC Power Input
1 x RJ-11 Modem
1 x RJ-45 Network
1 x VGA
1 x Mini-phone S/PDIF/Audio Out
1 x Mini-phone Microphone
1 x Mini-phone Audio In
1 x mini-DIN S-Video Out
1 x IEEE 1394 - FireWire
4 x 4-pin Type A USB 2.0 - USB................
I have aspire 5720 bought in 2007. It stopped suddenly. On pressing power button start up light comes on which stays about 5 sec and switches off. Tried with and without battery but same. Fan starts and in a se laptop is off. I have removed HDD and put it back and same to ram. Also did power reset by holding on power button for a minute without battery plugged in but no luck.
View 8 Replies View RelatedMy VGA card Nvidia ((Geforce9600m)) has a 54c to 50c on Idle. gaming 87c to near 90c on playing Burnout paradise.
so, is that normal? or should I downclock my VGA? if so . how could I do it. note: my VGA card setting is default.
whether the AC power adaptor itself should show an LED light on while it is plugged into the power (and not just when it is charging/connected to the laptop too)?
My Dad has come over here on holiday with an Acer Aspire 5720 Model ICL50. It had been working fine, however this morning we started getting the low battery warning sound, despite the power cable being plugged in. We have taken plugs in and out, taken the battery out etc, but the laptop will show no sign of receiving more power via the adaptor.
I figure its either one of two things - either the adaptor has died, or there is an issue with the power connector in the back of the laptop itself, perhaps it got knocked and damaged internally or something.
I restored my Acer Aspire 5720 laptop using the factory restore DVD . I used to be able to press Fn+MJKLUIO78, or Fn+9 to type the numbers 012345678, or 9 while holding the Fn key.
After I finished restore the laptop to the factory image, the Fn+M...9 keys didn't work anymore.
Instead of mapping the keys to 0..9, it mapped the keys to Home, Up, PgUp, Left, Right, End, Down, and PgDn.
So for example, if I press Fn+L, instead of "3", it gave me "PgDn". It was giving me "3" before I restored the factory image.
So recap, I used to be able to hold Fn and I could type the "blue" letters printed on the keyboard.
I don't think this is Vista problem because I boot the laptop to DOS, the keyboard mapping is the same.
I think when I press Alt-F10 to run the recovery, I must have pressed some other hidden key sequence to switch the keyboard profile by accident.
As I had been having a couple of minor problems with a temporary dim screen on startup and occasional screen flicker, I decided to upgrade the NVIDIA display driver on my 5920G.
Unfortunately I rather carelessly installed driver update 180.48 for a 8800 GS rather than the correct 178.24 for the 8600GT on my laptop.
It installed fully and the display still seems to be working OK (but screen flicker still there)
I am wondering whether or not it is OK to leave the 180.48 driver as it is or whether I should roll the driver upgrade back and then install 178.24.
To be honest I find installing drivers quite complicated and difficult so I would prefer to take no action unless the expert advice from members of this forum says it will cause me future problems.
what video drivers are working for other owners of the HDX16t.
I'm currently using the 179.04 driver from HP and have managed to overlcock it (see specs in sig below) by using RivaTuner 2.22 and following the advice in this thread HP DV5T 9600M GT Overclocking Guide
This yielded 5581 3DMarks and raised my WEI Gaphics score to 5.9 and Gaming Graphics to 5.5.
However, my experience with trying later drivers has not been stable.
What driver is working for you?
My laptop has a bluetooth driver installed, but I cannot find how to activate it. Is this just the software that requires a dongle to connect?
View 1 Replies View RelatedI has bought a new E6500 from Dell store, and I heard people said that my laptop had a Dell Wireless 5720 EVDO Rev A Mini Card build in.
But I can not find any driver to use this card, So if you know where is the driver download link, plz tell me
My laptop link on Dell store: ...
I just installed Windows 7 x64 from scratch. Thing is, it shows 4GB of installed memory, but only 3GB is accessible.
Resource Monitor shows 1026MB of memory being "hardware reserved".
I've had this problem ever since adding the 4GBx2 sticks (DDR2-667) in my machine. I've tried 3.50 and 3.60 bios on Acer's site, but it doesn't make a difference.
Processor is a T5500, but the chipset is i945PM, so it supports 4GB of ram. Is there a way to remap the ram so that the whole 4GB can be used?
Doing a clean install of Vista and keep getting prompted to locate and install driver for "Coprocessor". Have looked in device manager (yellow mark) but I just don't know what it is. Windows says it can't locate software for it.
Don't know what I am looking for on Acers site under drivers, installed all other stuff OK, Realtek, NVidia etc. Could it be a modem driver. Properties in device manager give no clues, it's listed as "other devices" along with the webcam which I have to sort drivers out for too.
I bought a manufacturer refurbished Inspiron 5720, i7 3612QM, 8GB RAM. The BIOS is currently A12. When I received it, it had a bad hard drive. Dell sent me a new hard drive under warranty, but it was blank and I had to use a recover CD to reinstall Windows 7 Home Premium 64-bit. I have installed every recommended and updated driver for all of my hardware components. But, everytime I install the HD 4000 drivers, the system starts to freeze up.
The system runs fine with the Standard VGA driver, but I can't run anything that requires better graphics. I have tried installing every version and they all cause the system to freeze. Sometimes it freezes during the boot up and sometimes it will run for up to 2 minutes before freezing. And by freezing, I mean that it just stops working. Sometime if I let it just sit and wait, it will shut off automatically. Other times, it just stays frozen for hours and I have to hold down the Power button to turn it off. When it restarts, it boots to the Safe Mode option screen. I then have to boot to safe mode and restore the system to a previous recovery state.
Just got my aspire E5-411 today..i cant access the webcam and when i tried to check it in programs, there's no webcam installed..
View 1 Replies View RelatedI Formatted my laptop and installed windows XP (was a successful install) But my problem is....none of my hardware is installed. The WNet doesn't work, Vid Card isn't installed, nor is the Sound Card, and any other hardware that I'm forgetting that also needs to be installed (nothing is installed). I don't have the discs to install them. Can I get the installs for all these online somewhere and burn them to a disc and install on laptop?
View 15 Replies View RelatedI have upgraded to Windows 7 x64 (a fair while ago) and rencently it has started to come up with "No sound device installed" over the speaker icon in the sys tray.
This happens about 50% of the time when the computer has started up.
It never has any issues once the sound is working.
When the sound is not working "Sound, Video and Game Controllers" in Device manager is missing and i cant find the "Reltek HD Audio" device any where else in device manager.
It's just had a freash install of the OS and is still not working reliably.
It's got the latest Win 7 x64 drivers from RelTek
I have been working on computers for almost 20 years and this has me completely confused. My Aspire V3-571-6643 laptop was working fine until just recently. The system will power on and show the Acer screen and then immediately reboots. It will stay in this reboot loop until manually stopped.
I cleaned and reseated the RAM module and also tried it in both slots with no change. I was able to access BIOS and determined the drives and all settings are correct and even reset to factory defaults with no change. I then pulled the HDD to use in a docking station to determine if the drive was salvagable. Everything reads fine and passed both short and long tests via SeaTools. With the HDD installed the system won't try to boot to CD/USB but after removing it the system will boot to CD just fine. I then ran a full scan using Eurosoft Pc-Check and everything is fine. I reinstalled the HDD and immediately get the reboot loop again.
At this point the mainboard and HDD both test fine independently but will not work together. My only guess is that the mainboard is no longer supplying enough power for all of the components and crashing when the HDD tries to spin up on boot. That, or the SATA controller is malfunctioning and only working for the ODD.
I'm a PC repair technician and have been working on computers for almost 20 years and this has me completely confused. My Aspire V3-571-6643 laptop was working fine until just recently. The system will power on and show the Acer screen and then immediately reboots. It will stay in this reboot loop until manually stopped.
I cleaned and reseated the RAM module and also tried it in both slots with no change. I was able to access BIOS and determined the drives and all settings are correct and even reset to factory defaults with no change. I then pulled the HDD to use in a docking station to determine if the drive was salvagable. Everything reads fine and passed both short and long tests via SeaTools. With the HDD installed the system won't try to boot to CD/USB but after removing it the system will boot to CD just fine. I then ran a full scan using Eurosoft Pc-Check and everything is fine. I reinstalled the HDD and immediately get the reboot loop again.
At this point the mainboard and HDD both test fine independently but will not work together. My only guess is that the mainboard is no longer supplying enough power for all of the components and crashing when the HDD tries to spin up on boot. That, or the SATA controller is malfunctioning and only working for the ODD.
THERE IS NO DEVICE SETTINGS !!!!!!!
View 7 Replies View RelatedI'm using a Scandisk 8 gig flash drive for ready boost. When I boot the computer, it won't boot in to vista unless the flash drive is pulled out. I updated to bios 1.43.
View 5 Replies View RelatedI have an Acer Aspire 5315 and says "No audio Device is installed". Where can i find the drivers...?
View 5 Replies View RelatedI was replacing y HDD in the laptop with SDD. The laptop is acer 4830TG, it had 512GB HDD WD. Replacing it with Kingston SSD 480GB.
The SSD is not detected at startup of the laptop, while it is detected on another machine, I also tried another SSD on the acer and it was detected (the other SSD is 120GB). Is this a sort of compatibility issue ?
I have just received an Acer 5935 and I have already formatted and reinstalled Vista 32 Ultimate SP2.
The laptop has two video cards: a nVidia GT130 1GB and an Intel GM4500.
I downloaded the latest nVidia WHQL notebook driver (186.03) for my graphic card but i can't install it.
The installation stops and I have the following message: "hardware not recognised".
I am obliged to use the older Acer driver and you know they never update it to the latest and most performant release.
Anyway, it's not because of the two graphic cards...
I have had the same problem with a Dell Studio 1555 which has an ATi HD4570 512MB.
I tried the latest modded Catalyst (6.6) and I was obliged to install Dell's driver... but I could install the same driver on another laptop (Dell Studio 1535) with a HD3450.
