Does anyone know of a good place to get replacement motherboards for Acers? Specifically the Ferrari 3400.
So far the only place I've found is Notebook Solutions:
[url]
I have an Acer Ferrari 3400 and i just replaced my hard drive with a 160 GB drive, however the computer only sees about 131 GB. I've read abit about the 137 GB limit and wanted to know if the motherboard/BIOS for this model supports 48 bit LBA so that i can see the remaining space on the hard drive. I have windows XP pro service pack II installed, but i don't know how to activate 48 bit addressing or if my BIOS suppoerts it.
View 13 Replies View RelatedAfter i updated to the new vista BIOS 3c25. my ferrari 3400 cannot wake up from standby. the screen is blank...no Hard drive light blinks..looks like the system got hanged.i have to force the power button to power down the system and restart it again.There is no other issues other than this standby thingy..
View 4 Replies View RelatedAbout a year ago my Ferrari 3400 kicked the bucket, but it turned out that it was the RAM that had gone bad, I replaced the stick and it worked beautifully again.
Around that time I also bought another 1 gig stick to get it up to the 2 gig mark.
Both sticks are Ultra PC3200 400Mhz Sticks.
This evening while working on a website my computer froze up completely. I rebooted and similar to the last time it died, it wouldn't post.
So I tried pulling out the RAM, trying 1 stick at a time, one slot at a time, reversing the sticks etc.
Once the screen actually lit up and there was a flashing cursor. But the next time I tried there was nothing.
Following this I tried a spare 256mb sodimm I had kicking around, this time it posted fine and seemed to be good, but following the post screen hung at a black screen. I reset and it once again refused to post.
So I tried swapping in all the sticks again with different combos, finally once more the spare stick managed to get it to post but with the same result.
I'm completely baffled now. This thing's well beyond the warranty period now, my gig sticks I think are both still covered, but I'm really doubting that the RAM is really the issue. Could it be a processor issue?
here are the specs of my Acer Ferrari 3400:
Acer Ferrari 3400
ATI radeon 9700 mobility
2 gigs of ram
Dual boot with Win XP pro and Ubuntu 7.04 feisty fawn
Newest BIOS and software updates from Acer homepage
Few days ago I started having a problem with my Acer Ferrari 3400 laptop. It all started one morning when i tried to boot my computer.
I booted with ubuntu 7.04 feisty fawn and right after the operating system loaded the X graphical interface, the screen went black and the computer freezed.
I rebooted and tried again with Windows XP (I use a dual boot with Win XP and Ubuntu), and this time I got as far as the Windows loading screen. Then the loading screen turned black and the computer just rebooted itself.
I turned off the windows "auto-rebooting in case of error"-option and tried to boot with Win XP again.
This time I got a "blue screen of death (BSOD)" right after the Win XP loading screen. The BSOD indicated a problem with ati2dvag.dll and said that the "device driver got stuck in an infinite loop". Also the technical information said:
** STOP: 0x000000EA (0x8A56C218, 0x8A5BDAD8, 0xBACDFCB4, 0x00000001).
The numbers in parenthesis are always bit different each time i try to boot.
I googled the error and it seems this kind of a error message is very generic and could be the result of nearly anything ranging from software problems to hardware malfunction.
So this is what I have tried to do so far:
- I booted Win XP with VGA mode -> Windows booted normally, but as I try to increase resolution the same BSOD appears and I have to reboot.
-I uninstalled all ATI video drivers from Win XP and windows booted normally. Of course, without video drivers, the performance of Windows was very sloppy. But it worked with higher resolutions.
- I installed the newest Omega Drivers for the vid card. Windows booted normally, but still had sloppy performance. I tried dxdiag and it showed that DirectDraw&Direct3D acceleration are unavailable. It also showed that video card memory was n/a. Win XP worked with high resolutions.
- I tried to boot Ubuntu linux with a generic vesa driver and it booted normally. Changed back to radeon drivers and it didn't work.
- I ran the Memtest 21 times and got no memory based errors
- I cleaned Win XP radeon drivers with DriverCleaner and tried a fresh install of radeon drivers. Didn't work.
- Finally, I did a Win XP recovery (reinstall) with the CD:s that came with the computer. The result: same error as before and now I can't even enter the VGA mode because the windows tries to raise the resolution right before entering the desktop -> BSOD
which motherboards are compatible with the one of the Acer Aspire 5715Z?
View 7 Replies View RelatedIt seemed the Hp 8730w has two different motherboards. One for Quad Core CPU's and one for Dual.
My aim was to get a good dual now and hopefully upgrade to a quad down the line when their costs went down.
With the HP this isn't an option. I'm just wondering if the Dell has the same issue?
There was a discussion on this subject before but I can't find it. Currently I own XPS 1330 with nVidia GPU and LED screen. My GPU died a while ago, was replaced.
After that I applied copper mod. But it will die some time in future again. So I'm thinking to replace my mobo with one that has integrated GPU.
I have an Acer Aspire 5733Z Laptop and just recently, my cursor jumps all over the place while I am typing.Â
View 9 Replies View RelatedLately I have been having problems with the touchpad this week, started with freezing sometimes, which I typed in google to see another have this problem and to switch setting of touchpad to no delays, which worked as freezing hasn't happened at all anymore at the moment....and later in week, having some difficulty when typing when I click to type in a certain place but then the blinker moves elsewhere, problems with copying and pasting sometimes, as when I copy to highlight upwards, the page did not come up immediately when I slowly moved the mouse up as you do, but when it finally went up, it highlighted the entire document. Doesn't happen all the time....
View 9 Replies View RelatedI got the Acer Ferrari One 200 2 days ago (win7 64bit home premium). I noticed it has a hibernation problem. It goes to sleep for no reason. Very annoying. I tried tweaking ALL the power settings but still it will go to sleep for no reason. Hibernation on this laptop is erratic. I emailed Acer about this and still waiting for a reply. Bummer!
I also have a compaq cq40 with almost thesame specs with the Acer Ferrari One. turion x2, ati 780g chipset. My Compaq running win7 64bit Ultimate RC does not have hibernating issues. This really baffles me. Is this a windows 7 bug? or am I having hardware issues?
"Upgraded" one of my acer laptops to Vista from XP and now the beautiful Ferrari wallpaper doesn't function properly. I moved the folder from a different (XP) machine onto the Vista one, and it almost works. If I double-click the "FerrariWP.exe" file, the wallpaper shows up and with the correct date - however it never updates and it stays on the same day. If I uninstall and double-click again-everything is ok until the next day
My guess is that there is a slightly different version needed for Vista, and since Acer did ship many of these laptops with Vista preinstalled, there has to be (Ok, I'm hoping there is) a version floating around somewhere that is Vista-compatible.
Not the end of the world, but I've gotten really used to having that great looking calendar on the desktop and I'm not ready to give it up yet..
Would it be a match for a Celeron t1600 with GMA4500 graphics? (My wifes' laptop has this spec)
Bear in the following: I would be using it for college (if I'm accepted) and would need to run VMWare etc. Youtube and browsing etc. I also use handbrake for transcoding.
My budget is less than €500.
The killer about all this is that I had to sell my XPS m1530 with T9300 and 4gig RAM cos
I had an offer I couldn't refuse.
One of the reasons I was looking at the above "laptop" was for portability, cos I would be going to college on the motorbike. I have a well specced P4 pc for the home.
Another reason is because it has the 1366*768 screen with dual core cpu and discreet graphics. Nothing compared to what I had before, but needs must
if the Ferrari 4005 BIOS supports memory remapping, so that I can use full 4GB of RAM?
View 4 Replies View Relatedpurchased and installed a 1.6ghz tk-42 cpu in my ferrari one netbook, the bios detects it as a 1.6ghz cpu but i cannot get it to run @ 1.6ghz in windows without using 3rd party tools. tried reinstalling windows 64/32bit and it always boots @ 1.2ghz (default cpu clock). Does anyone have any idea how I can sort this out? Possible bios hack etc?
I can run without my external graphics card fine @ 1.6ghz, with it the machine crashes constantly.
I have a problem with my Ferrari 1005, when i power up it, the CPU Fan is sound so loud ... seem that the fan is improper place because of shock or something.
I want to know the problem, however i don't know how to open the Ferrari..does anybody can assist me to open.. and see the problem in CPU fan..
I loved my 5000 right up until it became to out dated to play on. Anyone know if a 6000 is in the works?
View 4 Replies View RelatedI thought the Acer Ferrari One was supposed to be released in conjunction with Windows 7. Has anyone seen it available anywhere yet in the US?
View 8 Replies View RelatedMy Ferrari 4002 shuts down when formatting the HDD using the long format or when copying files if the quick formatting was used.
Has anyone else experienced this? What can I do to try and troubleshoot this problem?
It installed Windows 7 without any problems.
I have a Ferrari One netbook.
The default desktop background is the ferrari car with a calender.
When I go to change the desk top (right click, personalise, select a new theme eg window aero) and reboot the computer it starts up again in the Ferrari scheme! Any ideas?
for some reason the window to select all the different themes DOES NOT have an 'Ok' and 'Cancel' button on the bottom right? That's weird!
I never thought about installing Vista in my 4005, but Windows 7 seens tempting. What about the drivers?
View 6 Replies View Relatedall of a sudden my laptop is not turning on...
i see the power light and the HDD(constantly glowing not blinking as if in use)..and a blank screen...not even the POST screen is showing up
I'm trying to upgrade my OS from XP Home to XP Pro SP3. However during the installation process (about 70%)it just switches off and reboots back to the old OS.
Is there a special process that I'm not aware of?
yesterday upgraded cpu in ferrari one with 2.4GHz AMD Turion Dual Core TL66 processor, also upgraded Ram to 4gig. laptop is a bit random, but works ok, have tested a couple of games on it and it seems ok for now, although is running a bit hot? not sure if this is going to cause any problems? have also flashed bios..any ideas as to what could go wrong?
ram and cpu from my dead ferrari 1100
The original cpu was a 1.2GHz AMD Athlon 64 X2 dual coreprocessor, acer tech guys said it was not upgradeble...
i have update my firmware to the new one, but it seems that it shut down at lower temperature.
but i have also upgrade my ram to 2 gb but its kingston value ram
and i have 2 operating system now, window xp and window vista ultimate
is it true that if i run the systerm on vista, it make the pc temperature hotter? and if run on high performance, its even higher than that?
at the moment im running window xp, running window media player watching videos, with 2 internet explorer running and also the everest ultimate edition which shows 63c for the cpu and 39c for hdd, and now im using those 4 fans notebook cooler.
is this temperature normal?
and sometime when just watching high definition video on window vista my laptop will shut itself down...
do u think its the ram which cause this problem? or is it window vista? or the new firmware which cause my laptop to shut itself down?
I have a Acer Ferrari 4000 AMD Turion 64 2GHz, and I'm trying to upgrade the internal HDD to an SDD drive (IDE interface) - it's a Photofast G-Monster-IDE SSD 90R/70W 128GB
The drive is working OK - I have conneceted it to the machine via a USB adapter, and partitioned it with no problem, I've also cloned the existing HDD onto the SSD with clonezilla.
But when I put it in the laptop it won't get past the initial splash page with "press F2 for setup" prompt and nothing happens. If I press F2 to enter the Bios, it just says "please wait" and never enters the bios configuration.
The bios version is S3A27
I have a acer ferrari as you can see in my sig and up untill now i have been using the 32bit xp which came with it . I wanted to know if anyone of you guys has installed the 64 bit version and if it rus better on it and if the driver support etc is fine?
View 8 Replies View RelatedHas anyone tried installing windows 7 on their ferrari 1000? How has your experience with it been? Can you get everything such as the orbi cam, wi-fi, etc. working? I'm on linux now and am pretty intrigued by what windows 7 has to offer. I want to try it out but Acer doesn't have any drivers available yet.
View 5 Replies View RelatedI've seen this somewhere, on a board (I think), but whenever I press firmly to the right of the touchpad, about an inch, the computer will freeze up every time. Sometimes typing, like right now, will do it. Any ideas? Acer Tech said they're never heard of it.
View 7 Replies View RelatedAfter using my ferrari for about 3 years now it's been with me in a lot of different places, climates, dust conditions and so forth. Lately I started to notice that the laptop was kind of hot , and the primary use of my laptop is internet browsing and office applications so no heavy cpu or gpu loads. The heat was annoying problem but not annoying enough to make me do any actions. But a week ago I noticed that when I watch flash based videos (like youtibe) laptop gets really hot and after 15-20min it just shuts off or reboots . This was annoying as shit. I tried things like putting it on a try of ice, didn't help, and since I don't believe in "gay" things like those cooling pads I decided to get to the root of the problem .
First thing I noticed was that the flow of hot air from the grill around the cpu was very weak, this gave me the hint that the radiator is probably stuck with dust. The solution I came to is simple: open the body clean it and see how it works.............