After i updated to the new vista BIOS 3c25. my ferrari 3400 cannot wake up from standby. the screen is blank...no Hard drive light blinks..looks like the system got hanged.i have to force the power button to power down the system and restart it again.There is no other issues other than this standby thingy..
View 4 RepliesI have an Acer Ferrari 3400 and i just replaced my hard drive with a 160 GB drive, however the computer only sees about 131 GB. I've read abit about the 137 GB limit and wanted to know if the motherboard/BIOS for this model supports 48 bit LBA so that i can see the remaining space on the hard drive. I have windows XP pro service pack II installed, but i don't know how to activate 48 bit addressing or if my BIOS suppoerts it.
View 13 Replies View RelatedDoes anyone know of a good place to get replacement motherboards for Acers? Specifically the Ferrari 3400.
So far the only place I've found is Notebook Solutions:
[url]
About a year ago my Ferrari 3400 kicked the bucket, but it turned out that it was the RAM that had gone bad, I replaced the stick and it worked beautifully again.
Around that time I also bought another 1 gig stick to get it up to the 2 gig mark.
Both sticks are Ultra PC3200 400Mhz Sticks.
This evening while working on a website my computer froze up completely. I rebooted and similar to the last time it died, it wouldn't post.
So I tried pulling out the RAM, trying 1 stick at a time, one slot at a time, reversing the sticks etc.
Once the screen actually lit up and there was a flashing cursor. But the next time I tried there was nothing.
Following this I tried a spare 256mb sodimm I had kicking around, this time it posted fine and seemed to be good, but following the post screen hung at a black screen. I reset and it once again refused to post.
So I tried swapping in all the sticks again with different combos, finally once more the spare stick managed to get it to post but with the same result.
I'm completely baffled now. This thing's well beyond the warranty period now, my gig sticks I think are both still covered, but I'm really doubting that the RAM is really the issue. Could it be a processor issue?
here are the specs of my Acer Ferrari 3400:
Acer Ferrari 3400
ATI radeon 9700 mobility
2 gigs of ram
Dual boot with Win XP pro and Ubuntu 7.04 feisty fawn
Newest BIOS and software updates from Acer homepage
Few days ago I started having a problem with my Acer Ferrari 3400 laptop. It all started one morning when i tried to boot my computer.
I booted with ubuntu 7.04 feisty fawn and right after the operating system loaded the X graphical interface, the screen went black and the computer freezed.
I rebooted and tried again with Windows XP (I use a dual boot with Win XP and Ubuntu), and this time I got as far as the Windows loading screen. Then the loading screen turned black and the computer just rebooted itself.
I turned off the windows "auto-rebooting in case of error"-option and tried to boot with Win XP again.
This time I got a "blue screen of death (BSOD)" right after the Win XP loading screen. The BSOD indicated a problem with ati2dvag.dll and said that the "device driver got stuck in an infinite loop". Also the technical information said:
** STOP: 0x000000EA (0x8A56C218, 0x8A5BDAD8, 0xBACDFCB4, 0x00000001).
The numbers in parenthesis are always bit different each time i try to boot.
I googled the error and it seems this kind of a error message is very generic and could be the result of nearly anything ranging from software problems to hardware malfunction.
So this is what I have tried to do so far:
- I booted Win XP with VGA mode -> Windows booted normally, but as I try to increase resolution the same BSOD appears and I have to reboot.
-I uninstalled all ATI video drivers from Win XP and windows booted normally. Of course, without video drivers, the performance of Windows was very sloppy. But it worked with higher resolutions.
- I installed the newest Omega Drivers for the vid card. Windows booted normally, but still had sloppy performance. I tried dxdiag and it showed that DirectDraw&Direct3D acceleration are unavailable. It also showed that video card memory was n/a. Win XP worked with high resolutions.
- I tried to boot Ubuntu linux with a generic vesa driver and it booted normally. Changed back to radeon drivers and it didn't work.
- I ran the Memtest 21 times and got no memory based errors
- I cleaned Win XP radeon drivers with DriverCleaner and tried a fresh install of radeon drivers. Didn't work.
- Finally, I did a Win XP recovery (reinstall) with the CD:s that came with the computer. The result: same error as before and now I can't even enter the VGA mode because the windows tries to raise the resolution right before entering the desktop -> BSOD
I have an Acer Ferrari 1000 with Vista Ultimate.
160GB Hard Disk
2GB RAM
This notebook are not CDs of recovery, but a partition PQSERVICE hidden partition.
The structure of this is:
One Hard Disk of 160GB with the following:
C: NTFS Type 06 Label: ACER 70GB
D: NTFS Type 07 Label: DATA 70GB
E: CD-ROM DVD-RAM DRIVE
AND Hidden Partition NTFS Type 12 Label: PQSERVICE 9GB
I don't have access to boot with Windows Vista, is broken...
I need to recover all my system to factory default, but the option ALT+F10 not work: Is enable in the BIOS the D2D Recovery, but i think that there's is some problem with the MBR.
The file acer oolsmbrwrdos.exe NOT EXIST in C: and the hidden partition neither, there is something like that but for windows only... MBRWRWIN.EXE and RTMBR.BIN ....
How can i fix the MBR for the ALT+F10 Works? and restore my system to factory default?
My old Acer Ferrari was protected with a bios password that i personally used. However I was giving away my old laptop and tried to clear out my bios password for its new user.
What happened was i simply put nothing when it asks to enter the new password in the bios..i just hit enter. Now the system keeps asking for a password when i have none to give. Even the old password doesn't work, as does just hitting enter. I don't know if anyone still knows tricks of the trade for this old system but anything could be helpful.
I've been trying to find a backdoor password but I can't find any that works and Acer won't help me cause I don't have warranty anymore since the laptop is old.
I have a HP Pavilion dv4t-1000 CTO Entertainment Notebook PC and after updating my bios from F.22 to F.24 the computer wont boot into Vista. It was completed successfully using the winflash, but the computer restarted it just stays at a black screen, and wont go any further. (I hope bios is not corrupted.)
The computer is on but its not booting the operating system.
Is there any way I can revert to the old bios?
Also is there any key combination that can get it to load BIOS from a USB flash drive?
Simply put I went to update the bios on my notebook as I have previously without incident. Well this time the update downloaded, installed and powered down Windows Vista 64bit SP1. After that nothing! The power lights come on but that is it. No HP Screen, No MSFT Screen no nothing. I honestly think this is a bios update caused by HP's own update.
This is the update I installed: [URL] ...
I have an ACER Aspire 5670. Recently i installed windows vista business.
From the day i installed vista my battery appears to be broken.
Ok let's say battery cells were destroyed (Fedora installed on the same system report that battery may be dammaged)-So it may be destroyed in a couple of hours.
The second weird thing is that it persists not to recognize one device. In the device manager it has a hardware ID: ACPISMCB000
Third weird story. Today my notebook prompted that there was SP1 update available. I installed it (in 3 phases - 2together at shutdown and 1 after restart)
After SP update my keyboard stopped working - same thing with touchpad. I uninstalled SP1, uninstalled synaptics driver and re-installed it - same thing.
In a forum somewhere i read that battery causes these problems. I took battery off and now i am writing this message from my notebook's keybord ... touchpad still dead...
both keyboard and touchpad work perfectly in Fedora 9 and that usb mouse/keyboard work perfect too in Vista.
I'm sorta afraid to update my BIOS since i'm planning on getting a Core 2 duo sometime. Acer Aspire 5135, and im trying to update to 1.33....what are the risks exactly? Or am i being paranoid...
View 6 Replies View Relatedim trying to update my BIOS on my 8930G from 1.10 to 1.13 (or maybe even 1.14). Im only doing this as id like to enable VT but the only info i can find is related to 1.13.
Now ive downloaded the BIOS package from Acer and have tried to run the Insyde flash utility (x64 on Win7) but it wont install. After a few seconds it comes up with;
'BIOS not for your notebook'
In the Insyde application window i can can see the following info;
Current BIOS ID - 8930 & Version V1.13
New BIOS ID - KM2/TT2 & Version V1.14
Does anyone know if there is a motherboard bios update for the 5920G? Is there anything for the 8600M? Any info would be a great help. Mine is a US model, purchased at Best Buy. Has the T5250 @ 1.5. Is there a way to upgrade the wifi from a/b/g to one with n?
View 6 Replies View RelatedWill the latest Vista BIOS V1.24 allow the 9410 to boot with 4GB of RAM?
Think I'm running the original V1.16 BIOS with one 2GB stick and one .5GB stick.
I'd like to run two 2GB sticks. When I try, it won't boot.
I want to flash the newest bios to my 5920G, but I don't know how to: the zipped folder has two different .exe files and one .sys, and I don't know which to double click to initiate the process...
View 5 Replies View RelatedI have Acer Aspire 5315 and was running Bios v1.33. It has been running warm for sometime and thought an updated BIOS would help.
I tried the ACER site but didn't see any BIOS updates listed for XP. I have XP Pro on it now.
I followed a different link and found BIOS 1.45 so i Flashed it using WinFlash.
After it completed it shut down, i waited a couple of min. and powered back up, when i did i saw the BSOD for about 2 seconds and then goes to selective startup (Normal, Safe, Safe w/networking etc...)
I have not tried safe mode yet but in normal it just goes back to that screen again.
I saw the thread on using the FN+ESC mode but not sure if i really need to do that.
what I should do to restore it back to 1.33? I have to check my external HD but i think i still have that 1.33 version saved that i used when i did it the first time.
I upgraded to 4 gb and the Bios was only showing 3gb/Vista 4gb.
I updated the BIOS via bootable DOS Fdd after reading things here and knowning that it was not possible via x64 Vista.
Update finished and notebook shutdown, not restart.
Now it will not turn on.
No lights with power adapter or battery.
I have tried the "crisis" disk method. holding fn+esc.
Tried power in and holding Insert.
I've tried with and with out battery/power adapter.
Opened and bridged the clear-cmos for 30 seconds.
Reseated RAM and CPU.
Tried all of this with 1gb, 2gb 3gb and 4gb.
but alas she is still in a coma.......
I have tried Acer support for help but they want it sent to them, I want to avoid this if I can.
Can a failed BIOS really kill a notebook?
I have tried the 1.35, the 1.32, 1.31, and 1.29 bios for the 5620 and all of them keep coming up as 'open flash.sys fail'.
View 10 Replies View RelatedI am looking for the following bios:
Acer Aspire 5310, Intel 27A0 rev 3, 2008-12-08, v1.50
Do you have any idea where to get this, who to ask? Acer does not list it, does not respond properly and I could not find anything in the forum here.
I have been having some performance issues with some of my games. I tried to fix it with no success. I figured I should update my BIOS, which I haven`t since I bought my laptop.
I downloaded the BIOS update (3238) from the Acer website. I clicked on the application and it brought me to WinPlash64. It automatically started the bios update, but it got stuck on “Flash New BIOS”. I had to shutdown my laptop since the BIOS did not update.
how to flash my BIOS properly or tell me what I`m doing wrong?
I am using a BIOS version since 02/02/2007 (of Phoenix). Before installing a Core 2 Duo CPU, do I have to update BIOS?
I have a notebook with a Core Duo 1.73 Ghz, chipset 945gm (heard from other member that it has Napa Platform).
I have no issues whatsoever with this laptop, but just saw that there is a newer version of the BIOS available from Acer. Should this be updated? What precautions should I take before doing so?
View 4 Replies View RelatedI have an Aspire 7720z. As Vista was having so many glitches, I set up a dual boot system with XP and Ubuntu 8.10 on two partitions on the same drive. Last week I upgraded Ubuntu to 9.10 but started having power problems. I read somewhere that a BIOS update would help so I flashed to v1.45. Everything is now going great with my Ubuntu OS. The problem lies in Windows. When I try to boot to XP the splash screen comes up for a couple of seconds and the the computer reboots. I used a test disk to check the drive and everything is fine. I then tried to repair the XP installation with the install disk but was told that it couldn't find an XP installation. So, for the umteenth time, I tried to re-install XP but was told that the installer couldn't locate any devices to install onto. Completely bewildering as my Ubuntu installation works perfectly.
View 5 Replies View RelatedI upgraded my RAM to 4gb and installed Vista x64 Home Premium. the system was only showing 3gb on start up so I updated BIOS to 3.50 via DOS as it can not be done inside Vista x64.
Bios update completed and notebook shutdown.
Now no power in notebook.
No lights on when connected via Power adapter or battery.
system will not turn on.
Downloaded and tried the crisis disk to reset the BIOS and still nothing.
how to flash the bios of a Acer Aspire 6530 without being in windows.
I download the bios update and opened to see how it worked and then accidently shut the zip file that it was in and it crashed, computer froze and now it wont work!
It load the boot screen and even windows but crashes after mup.sys and brings up an error screen about problems with computer and shuts down. I have tried reinstalling windows but when i get to the hard drive section the hard drive is not there although its there in the boot screen.
I have tried re installing the bios with the phoenix recovery tool but that didnt work.
Im guessing i need the Insydeflash tool and some special file name for the bios.
I tried winflash to update my bios but it killed my motherboard, what did I do wrong.
I now have another 7720G with bios version 1.40.
How do I update the bios without killing my motherboard again.
Obviously I am reluctant to do it, but I would really like to have the machine running properly.
My Acer Aspire 5517 Laptop is running Windows 7 X 64 with an AMD Athlon TF-20 Processor at 1.6Ghz with 2GB of physical memory. Every once in a while, and lately quit frequently, my screen goes black, and it will not boot...I have attached an exterior Monitor to it, with no success, so I assume it is not the video portion. To get it to boot I turn it off and on until it re-boots. Sometimes it reboots quickly and at other times it takes several minutes...up to 20 or 30 sometimes. I have run a disc check to see if all the  sectors are good on the hard drive. It checks out okay..I thought if the BIOS was out of date, I would update it, to  see if that work....
View 2 Replies View RelatedMy laptop came originaly with bios v0.3221.
A few days after receive it i dicided to made a bios update and updated to v0.3236. all went well but after reboot the media keys doesn't worked.
After that i tried to search for v0.3221 but can't find it on acer website so i update wit v0.3211 and media keys start working again.
Has this happenned to someone else?
Can anyone arrange me the bios v0.3221?
My laptop details:
T6400
Geforce 9600Gt
4GB of ram
for which I have tried my 8930G able to make eimem BIOS Mod VT, it is crashed when
flashing.
Then, only the fan was running and the laptop did not turn on. I have done a BIOS reset.
Here's a picture with the location of the BIOS battery.
is there any bios update for this bios
BIOS Type: Acer
BIOS ID: V1.10
BIOS Date: 2009-09-04
BIOS Vendor: Acer
BIOS Version: V1.10
BIOS Size: 1048576
Chipset: Intel 27AC rev 3
Motherboard Name:Gateway
Motherboard Model:LT20
System Name: Acer
System Model: V1.10
Base Manufacturer:Acer
Base Product: LT20
BIOS Type: ACRSYS - 1
BIOS ID: InsydeH2O Version V1.11
when i went to acer bios, i found out that my bios is KAV80
the ones they have which is the ad250 is KAV60