My laptop is aspire 5601AWLMi. Just opened to upgrade the memory and came across this slot. Its 60mm wide or around 2.5'' length and is slightly smaller than the memory slot.
View 6 RepliesI have aspire ethos 5951g with a 750G HDD and this laptop have a one empty mini PCIe slot and i want to mini PCIe storage for system  installing  .......
Â
May I use this slot to add mini PCIe SSD ?
Â
And if i may what is the type recommended for this model ?
I'm looking at the motherboard on my Aspire 5601AWLMi (mobo id "31zb2mb0091" ) and I see there's four places where can insert cards. Two are the RAM chips, those are labeled DDR RVS 1.8V with "tyco" written on the other side of the plastic bracket, there's wireless card slot not really labeled with anything conclusive over near the Lan and Phone port, and then there's another slot labeled "0624n3" on the left side of the plastic bracket and "-+AMP" on the other side of it. I have absolutely NO idea what that last slot is for, and I'd like to know, if anyone can figure it out.
To describe it, pin wise starting from the left it has 1 pin, a divider, then 61 pins in a row. I think it's 61. I'm not willing to recount :P
It's physically shorter than a ram chip, but not by much more than 3/4cm is my guess.
You can see the slot itself in this picture:
[rl]
The slot is sitting just above that big red..knob..thing.
Also, I found this page, but it didn't tell me anything useful, I think. The mobo is flipped over in the diagrams..
[url]
I am going to be doing a fresh install of XP on this machine.
I have downloaded all the drivers for the laptop that I think I need. I only have two questions:
1) The VGA_ATI.zip file, that will install the Catalyst Control Center and everything, right?
2) How do I install the LAN driver? I have the LanRTL.zip file downloaded, however in the folder there is no Setup.exe file. Just 3 .sys data files and a system info file. No executables at all.
Before I go ahead and do the format tomorrow morning, I'd like to get these questions answered. My internet on this computer is connected through Ethernet, so I kinda need to make sure the LAN is working.
Here is the rest of the files I have downloaded, am I missing anything?
. 802ABG
. ATI
. Audio
. CardRdr
. CCD
. Chipset
. ePM (the only one of the Empowerment Technology apps I may install)
. LanRTL
. Touchpad
I have a monitor backlight failure on my Acer 5601WLMI / 5600 series. How do I find a replacement backlight? Are there any instructions on how I would be able to replace it?
I'm a laptop newb, and I've already tried to do a search on this forum and I haven't found any threads for this specific Acer monitor,
I was given a broken 5600 - if I could fix it, it was mine. I fixed the electrical fault, but also foolishly deleted the hidden partition 1, which apparently held the restore image. The donor doesn't have the recovery CD, and I now need to do a full recovery. The drivers on the Acer site don't quite do the trick, and there's nothing I can find on the site to buy a new recovery disk.
View 6 Replies View RelatedThis afternoon my Acer Aspire 5600's 100GB ATA/IDE drive died on me (lots of clicking/grinding sounds, nonstop disk read errors). I was looking around for a replacement but all I can find in stores are SATA drives. Can I find a reliable IDE drive somewhere for cheap? Would it be worth putting in a solid state drive (if one can be found for $100 or less)?
View 10 Replies View RelatedWanting to do a motherboard upgrade. Need compatible motherboard info for Aspire 5740.
View 3 Replies View RelatedWanting to do a motherboard upgrade. Need compatible motherboard info for Aspire 5740.
View 3 Replies View RelatedBrand new G50-70: When using OSÂ from the SSDÂ or using OS from the SSD and doing things with a USB-drive, the empty internal DVD-drive making clicking sound and sometimes freezing SSD read/write operation for about 30 seconds but all the time freezing USB-storage read/write operation for about 30 seconds.
Â
When freezing there's always clicking. But when clicking there's not always freezing except when using USB-storage.
Â
OS is Win81-64.
Â
An example scenario: connect USB stick, open terminal, type diskpart, dvd-drive clicks and freezes opening of diskpart for about 30 seconds, then the same may or may not happen when entering commands like clear the stick and format the stick.
I have found that mouse etc only works from usb3 slot not from other 2 slots, have tried reinstalling drivers for chipset and usb3 ... I can run a fan stand from other 2 but that is all.
View 4 Replies View Relatedmy housemate is having problems with his Acer Aspire 5600.
Basically pretty much 2 out of 3 times you turn it on it will load in to windows and then just freeze. No touchpad input, no keyboard input, you cant use the power button either, you have to take the battery out to stop it.
I tried a USB mouse, no input from that either.
I formatted the whole machine and reinstalled everything, incase it was some sort of malware, still no joy.
One solution I read was to make sure all the battery settings were set to Never, as it can sometimes be known to put itself to sleep at stupid times... would make some sense for the symptoms, but I've done that and still no joy.
The machine runs fine EVERY time if you run it in Safe Mode... which doubly confuses me...
Another solution I have read is to switch the unit down to Word Processing Power on the acer control panel.
I havent actually installed the acer control panel, since I dont really like having third party software like that on there... but I should probably give it a go. Still, does it really HAVE to work on Word Processing power? That would be.... lame...
The notebook is running Windows XP Business 32-bit.
Alright I have looked at every single piece of literature I can find and I am stumped. I have an eMachines EM250 (mechanically identical to the AO D250) and I can not for the life of me figure out what the small card slot on the bottom of the computer is. I know the memory slot and the HDD slot but the third slot is a mystery. I think it is a mini-PCI slot for a solid state memory module but I'd like to find a definitive answer before I go any further.
View 15 Replies View RelatedWhen i start my laptop, during post i se an error...
ERROR
Resource Conflict - PCI Serial Bus Controller in slot 01
Bus:01, Device:04, Function:00
after that, he stops...and i can see an black background an a pointer in the uper left corner...
some times after a few trys he starts and work's normaly....no problem...works after restarts, shuting down, but in most cases does like this
i have an Acer Travelmate 290 that barely starts these days. Fan is starting properly but screen remains black. Sometimes the bootscreen appears and then the screen goes white after some seconds. I can go into BIOS or run Memtest+ for some seconds but it always gets white some time later. I removed all modular parts and exchanged RAMs already. It got worse lately. Whereas the device starts maybe one of 10 attempts and remains stable for seconds it was working for minutes weeks ago. I detached/disassembled the notebook completely already several times. I don't have any Pentium-M replacement so this is the only part i couldn't swap yet.
I measured the cmos coin cell. It holds 2.539V of 3.0V. Looks empty but CMOS values are still ok i think (date is correct if i enter BIOS). Is it possible that the CMOS cell is responsible for those false starts?
I'm trying to boot from legacy boot from my new dell 7000 series. however when i change from uefi to legacy i have no boot option. the whole boot list is empty.
i have called dell and the support desk told me dell has no support for legacy :S that means no windows 7 on my dell or any other os that uses non uefi...... i think the bios is corrupt is the whole list is simply missing.
I have an Y510p laptop and I am not pleased with the hdd performance, so I wanted to add an SSD, but the slot is literally missing:
Â
what am I supposed to do? I know that this laptop supports only M.2 SSD, and I am ok with that
I recently purchased a intel 530 240GB ssd for my extra msata slot. Turns out that my new msata ssd won't fit the slot. I'm wondering if Lenovo installed the wrong type of slot on my mobo.
View 8 Replies View RelatedI want to upgrade the RAM of my laptop, but before I buy a second card, I wanted to make sure that the computer would be compatible with it. I opened it up to access the RAM, but when I tried to put the card that was already installed into the second slot, it wouldn't fit. It appears to be the right size, but it will not fit in the slot.
View 7 Replies View RelatedI have a U530. I had to restore the laptop to factory configuration. However, after the restore the MMC slot and the USB slots do not work properly. The MMC slot does not work at all. The USB slots will work with newer sticks (3.0?), but not older sticks that I have (which are properly recognized by all other PCs I have running 8.1). I went to the support site and installed the "latest" drivers, but they did not resolve the problem. I tried installing the latest firmware, but it returned "LoadImage() Failed! Access Denied. Error: Update BIOS Failed! Unload Image() Failed! Invalid Parameter. InsydeH20 - Secure Flash. Error: Firmware update failed!!! Please press any key to reset system......"
Â
I've already spent the time to reinstall all my software and really do not have the time to try another reset to factory configuration. How to get my MMC and USB slots working properly.
I want to install an additional M.2 SSD to my X240. As far as I know, X240 has three M.2 port:
 - One single side M.2 for wireless card
 - One single side M.2 42 mm for WWAN (3G card). Mine is empty in this slot.
 - One double side M.2 for cache drive.
For M.2 cache drive, I dont know if my machine has it. I dont have smart card reader module either.
But I do have the single M.2 42 mm.
I want to buy a SSD:Â MyDigitalSSD Super Boot Drive 42mm SATA III (6G) M.2 2242 NGFF SSD (128GB (120GB)) But it is double side (B and M key).
tell me if I can install it to M.2 slot of WWAN module?
This is the picture of my WWAN slotÂ
[URL]
I have an X120e running Windows 8.1 Pro x64.I just upgraded the unit to 4GB of ram (2x2) from 2GB (1x2). Whenever the upper DIMM slot is used, the system will not leave standby mode, and all power, including the battery has to be removed from the system for it to operate normally again.
Â
Of interest, all of the ram tested good with Memtest86+ if it matters the system has the e350 CPU, and a 320GB HDD.
I just reveiced my Lenovo Thinkpad x240 20AL000AAU with SD card reader integrated.
Â
I inserted an SD card standard size and the card is read properly, I can access all the files and I can write on it.
Â
The problem is that I cannot extract the card from the SD card slot!
Â
If I right-click on SD card in My Computer and choose eject, it says that it is safe to remove the card. If I select "Safely remove Hardware and eject media" it tells me that it is safe to remove it...but the card is stuck inside!
Â
I read somewhere to press the card until I hear a click but I cannot hear any click.
Â
Also the card is unreachable inside the slot. I cannot grab it to pull it. I can only press it a little bit with the nail, it goes one millimeter inside but I don't hear any click.
Dell announced, a few weeks ago, a new replacement for the 57XX and 55XX Mobile Broadband MiniPCIe cards that they are installing as integrated WWAN in select notebooks.
The new Dell Wireless 5600 Mobile Broadband card is based on the Qualcomm Gobi chipset, and therefore supports all major NA carriers (CDMA and GSM/HSPA), and all global UMTS/HSPA bands.
As a result, you can theoretically use this one integrated device on AT&T, Verizon, Sprint, O2, Telus, Rogers, Fido, T-Mobile, or any other EVDO or HSPA service globally, just by activating with the provider (CDMA/EVDO) or using the providers SIM card (GSM/HSPA).
The motherboard on my XPS M1330 needs replacing for the second time. First time it was replaced under warranty, but my system is now out of warranty so I'm going to replace it myself.
I phoned Dell and they're charging €400 for a replacement but I can get it cheaper if I knew the Dell part number. I have the NVIDIA 8400M GS.
From doing some research, here are some part numbers for motherboards for XPS M1330's:
PU073
GM848
CX062
D057F
K984J
How can I check my existing motherboard's part number to ensure I order the correct part?
I'm considering to buy a factory refurbished HP DV7-2177, as I saw many people saying that factory refurbished ones are as good as a new one.
But what if it has no seal indicating that it is refurbished, that the vendor just took it off? Can I still recognize by using any program?
there seems to be an invisible file in the trash been as it says "1 Item" but i can't see it, when I empty the bin it makes the sound but bin icon shows there's still trash? when i boot into Win7 via vmware the file disappears and the bin icon shows it emptied but when vmware is shutdown it reappears?
View 8 Replies View RelatedI have to fix this notebook for a friend, but I don't know the HDD model or brand. I entered on the bios but it doesn't show. Is there anyway I can get it?
This notebook has hdd problems and I saw an UUID on bios, so here's another question: Is there anything I need to do before replace the hdd or only Sony can replace it?
I am running a Pavilion dm4-1150ea under Windows 7 professional (64-bit). My fingerprint reading software has become corrupted and I need to re-install it. I have a system recovery disk but cannot identify the appropriate file. Can supply the filename(s).
View 9 Replies View Relatedwhat a mini PCI slot is and does please? I just got another 1Gb Samsung RAM for my Aspire 5610 (AS5613AWLMi) cause I thought the spare slot was for RAM and the guy I got the RAM from off of eBAy now says its a mini PCI slot! I will keep the spare RAM for emergencies but being the 'divvy' I am, I have not the fogiest idea what a Mini PCI slot is or does?
View 15 Replies View Related