Just reformatted my aspire 9500. however, unlike before the reformat, that function buttons seem to have their onscreem display, for example 'fn' + up arrow would display a green bar on the bottom of the screen. Does anybody perhaps know how to get these back?
View 5 Replieslast year i formated my acer 9500 laptop and got a normal home win xp. A couple of days ago i got a hold of my original acer system cds and i decided to restore my system back.
Everything went well until the install finished; I was in windows and the first time i restarted the laptop it didnt boot back in win xp. When its about to start booting windows it stops and all i get is a black screen and a flickering white small line on the top line. I tried reinstalling the original system again and the same thing happends; after the first restart it doesnt want to boot xp.
I started reading forums and found out that if i press alt+f10 it might fix the problem.
It worked, if i press alt f10 before it reaches the black screen it loads into xp. This is the only way i can load it. As i read i got the feeling i might have messed up my MBR.
Im not sure how this all works but i have a hunch that my laptop doenst know where my xp is when its supposed to load it and by pressing alt f10 it somehow temporarly fixes that.
Is there any way to permanently fix this ? Some pple said that if i ran a normal non-acer win xp cd and ran some sort of MBR fix it might solve my problems. Im getting a cd from a friend in a couple of days . Is there any other way i can fix my notebook before then ?
Its not a big deal if i have to press alt f10 everytime i restart but its annoying and i have a hunch ill run into trouble later on.
I have a problem with the audio. I reinstal the O.S. because my laptop was working slow, and because the sound did not work properly. Everything affter instalation works fine, just the audio doen't work properly, it sounds...hesitating
I thought the problem was the cpu temperatures... 60º-65º idle, and just open a few windows it reachs at 75º-80º, and stay in this temps.
Notebook Hardware Control, lets make undervolting. So I make some test... and just when the cpu loads at 100% the audio works properly, clean and perfect. If cpu loads under 80% the audio sounds... but defective, not clean...
Acer Aspire 9504.
First of all it runs in Windows completely rock solid. I have ran stress utilities for over 24 hours, and the system is completely stable.
My problem is that it is very unstable before windows loads. For example, if I simply leave it in the BIOS setup for 5 minutes the computer will just power off. It is also quite hot underneath. This occurs also if I boot from DOS (or other e.g. XP recovery disk) boot disk to run some utilities - the system will run for 5 minutes or so, and then just power off. The time that I get before it powers off decreases if I immediately switch it on again, suggesting an overheating issue. I did not have this problem when I first got the laptop 3 years ago.
This problem is really annoying as I want to run some low-level utilities to repartition my hard disk and also possibly reinstall windows, but this problem is preventing that.
Any ideas? Perhaps some strange software that I installed? ACPI config? Memory issue? BIOS issue? Computer is hot in several areas under where the CPU / TV tuner / graphics / memory are located .
My system spec:
- Pentium M 760 2GHz
- Ati X700 256MB graphics
- 2GB crucial RAM (2 x 1 GB DDR2 533 CL4) (upgraded from 1GB over a year ago and fully tested to be working)
- Newest BIOS from Acer installed
From system information:
OS NameMicrosoft Windows XP Home Edition
Version5.1.2600 Service Pack 3 Build 2600
OS ManufacturerMicrosoft Corporation................................
Is it possible to do so?
View 5 Replies View RelatedI tried to reformat my Acer Aspire 5560. It goes through the System Disk, Recovery Disk 1, 2, 3, and 4 then on the Language Disk towards the end it receives a "Fail to Customize WinRe for recovery utility error".
Â
I have seen this error when people tried to create a recovery partition for the future but in this case I need it to get my computer back to working again!
Â
In the meantime it won't reboot and says BOOTMGR is missing Press Ctrl+Alt+Del to restart and just goes in a loop.
im trying to put windows 7 or vista on a aspire 9500 and cant find any drivers to get on the internet is it a xp only machine that makes no sense?
View 9 Replies View Relatedso I recently ordered my Studio XPS 16 and hopefully it will be coming 5/15/09(crossing fingers).
I am debating if I should reformat when I get it, I am a little nervous about doing it.
I was just thinking about manually uninstalling some of the crap that comes with it, like the facial recognition since I know I wont use it. Will I see a noticeable performance increase if I reformat? Or should I just uninstall the things I wont use?
Ive got an acer 5315 windows vista, and ive got a virus on hard disc! I'd ike to reinstall it but the alt + F10 thing doesnt give me the options to do so, ive tried loading it in safe mode but just gets stuck and goes to a blue screen? So now ive decided i want to reformat it but dont know what buttons to press to get options to do that?
View 5 Replies View RelatedI got the dell xps 1340 and was wondering, will these drivers be good for me:
http://forums.laptopvideo2go.com/top...ceware-185-85/
I have a 9500 GE (Hybrid SLI)...
If so how should I install them ?
How much Watt does the Sony Z with P8400 consumes less than the P9500
View 5 Replies View RelatedI downloaded the newest driver for the nvidia 8600..Which is like a year old now..Sometimes I would get the old blue screen crash and dump when viewing certain dvds..So I checked nvidia's website and got this driver and now I can't even watch dvds in the windows media player 11..I like to use it and other players work like the built in Quickplay..
I thought it was the codec but I am not sure what to do..I have tried a couple things installing codec packages and what nOT..Downloaded the new Divx 7 package and it gave me back avi and some files will now play..But some are s till a green blank...Also the dvd playback won't even do that or play sound..It kinda starts and everything freezes and its just black..The WMP locks up and becomes un responsive...Have shut it down and start over..I was thinking of going back to the old nvidia driver that I had but now sure how to do this..
I just finished reformatting and I'm on the desktop, but the highest resolution it'll go to is 1400x1050. I had 1080p before! Is this a driver problem because I have not installed them yet
Also I'm clicking the Eject Button and the DVD isn't ejecting
to reformat my sisters Air... She is now visiting me and all the disks are in US. Computer is really working fine but she desperately wants to reformat it... Anyway, can I use disks that came with other mac to reformat it or it should be specifically Air's disks?
View 5 Replies View RelatedI know there is two partitions on my harddrive; one for everything (C and the other is recovery (D..
When I use my vista disc that it came with does it automatically do it for me or do I select which partition to reformat (or reformat both partitions)?
Then what do I do with the drivers disc? install during reformat or after?
I am having a problem with a 1501 reformat and need help.
I have done a complete reformat and everything seems to work fine except for one thing---I cannot get on the Internet. This unit was wireless capable before the reformat, but now doesn't seem to show any wireless capability and will not log on to the net even through broadband.
I am guessing that there is a driver problem with the network adapter? I have tried to download a dell driver to DVD from a different computer, but no luck so far. System Devices shows 5 different devices that are "questionable" with no drivers, including a "network controller" and an "ethernet controler".
I have the CD's that came with the unit, including a "driver devices" CD. I have tried to use that CD but no luck so far.
I am a rookie at this but have done reformats before without any problem. I am a student and this computer is something of a "repair project" for learning purposes.
I have to do is put the Dell Vistra Reinstallation CD in and follow the prompts?Then go to the Dell website and download all the drivers from there?
Will dell miss out on any drivers on their website?
I read somewhere that without the MediaCenter3 and the AHCI the laptop will go slower?
I have a VGN-FW486J/H that I reformatted to sell to a soldier over here in Iraq with me.
I downloaded and installed the Blue ray drivers from the sony web site and assumed it would work. I had him come over to show him the quality of the blue rays when played but after putting it in the drive, it didnt wind out or anything (including autoplay).
When I went into "My Computer" and double clicked the F: drive, it just ejected the blue ray disk.
It plays regular dvds just fine and Im currently installing Red Alert 3 for him so the drive is working.. jus not reading blue rays.
I have a new 17R 7720 SE- that worked great when I got it, but after all the Dell updates- the Waves Maxx doesn't work, and if I use it for more than an hour the screen turns white and the Laptop screen then goes blank! I've called Dell and they told me the 17R 7720 SE runs hot because of the internal 2gb nVidia 650 Video Card.
 I spent the money for a Cooler Master Laptop cooler with 3 Fans (separate A/C adapter to run this thing) and the Cooler Master sounds like a jet airplane under the Dell- and the Dell screen still shuts off. The only way to solve this is use an external monitor... if I would have known this I never would have order this worthless Inspiron.
I write this from my trusty Latitude D630- it's never let me down... the 17R 7720 SE has nothing but trouble! Dell recommended I reformat the Hard Drive, and re-install the factory software from the System Restore Disc...
I recently received my new Vostro 1320 and i'm quite satisfied with the system thus far.
I would however really like to put my own copy of XP on it (the system came with Vista Basic). I have my own copy of XP and all the XP drivers from dell's support site.
I've heard that there might be some issues regarding the BIOS that might make the reformat less than simple. Can anyone provide any advice about it or should I go about it as usual.
I had to replace the hard drive and formatted it with XP, now the built in Intel wifi adapter does not work (also the sound card is not working).
I am sure it is a driver problem, but am having trouble finding the correct one from Dell
I have reformatted my old Inspiron 6400 in preperation of selling it, however I used to leave the Bluetooth module turned off the majority of the time when not needed to conserve power.
The module was turned off at the time of the reformat. Since reformatting I cannot get the Bluetooth to work. I can see it in the BIOS and I have loaded the drivers, but it's still failing to work or recognise it
I was looking to reformat my notebook and I was curious what the essential drviers are? I have Windows Vista disks so I won't be using HPs bloatware junk. I saw the thread with updated drivers but what can I ignore?
I know I will need the graphics, ethernet card, sound drivers... but what else? I want the bare minimum. I hate HP software?
Stuff like quicklaunch I can ignore right? I just need to make sure I install the quick touch button drivers right?
I'd like to reformat my Y460P due to some blue screens of death (MEMORY_MANAGEMENT & SYSTEM_SERVICE_EXCEPTION. I do not have a disc. How do I do this?Â
View 9 Replies View RelatedI have a dell XPS m1530, and because I am pretty sure I had a virus that my antivirus software could not pick up I reinstalled Vista.
I ended up reformatting the partition it was on before installing over, I also reformatted the recovery partition. But, apparently XPS system comes with a MediaDirect partition that I was unable to reformat (the windows set up did not let me do this).
I am wondering now if it's possible for the virus to have lived through the reformat in the MediaDirect partition. If so, how can I reformat that partition?
I've followed the instructions for the system restore / format HD, but when I press F8, I do not get the option to restore etc...its just takes me back 'home' to the start up page.
I have all my reinstallation disks from purchase - is there any other method I can use? I need to reformat and restore ....
how to restore / reformat an Inspiron 720 to factory settings? Its 6 years old now and in need of a reformat.online ive found several answers all suggest pressing F8 on system stsrtup and doing it there.however when i do that and choose Repair My PC i then only get 5 options
-Startup Repair
-System REstore
-System Image REcovery
-Windows Memory Diagnosticss
-Command PRompt
None of these seem to allow me to reset my PC to its original state.I didnt have a disc with the PC, there is a recovery partition on the hard drive so i presume i should br able to reformat from that.
I have a HP 2000 2b09wm. It just broke, giving me the error message saying in so many words that I needed a new hard drive. Guess the old one went kaput (even though I just bought this pc on eBay not a month or two ago). I have a new HD and a Windows 8 reinstall software from a dealer on eBay. I tried multiple routes in attempting to reinstall the OS resulting in as many dead ends*.The last thing offered up was to delete partitions in the new HD. I looked at an eHow page, How to Delete Partitions on a Hard Drive. It says to get a CD that includes fdisk.com. I burned super fdisk (2 MB) from SFbootablecd.iso and fdisk (40 MB) from fd11src.iso. I went to the BIOS to configure the boot order. I put Internal CD/DVD ROM Drive first, saved it and tried both CDs. It always just boots to a screen with this:
Â
Boot Device Not Found. Please install an operating system on your hard diskHard Disk (3F0)F2 System DiagnosticsFor more information, please visit: [URL] .....
Â
I even tried putting USB CD/DVD ROM Drive first…same results.
Â
So, my questions to you, I guess, is firstly, why are the fdisk CDs not booting? Did I burn the wrong fdisk? Secondly, do you know why my OS couldn’t be installed using the reinstall software? I’m assuming the software is legit and the computer did in fact originate with Windows 8.Â
Â
*A couple of the dead ends:
Â
Compatibility report - The computer started using the Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. Then, insert the installation media and restart the upgrade. Do not select [ICustom advanced]I to perform an upgrade. [ICustom advanced]I installs a new copy of Windows and deletes your programs and settings.
Â
Another route for Windows Setup, I get to this: Select the driver to install: Browse for Folder - Browse to the driver, and then click OK.It gives you the list under "Computer" which includes "CD Drive (E HRM_CCSA_X64FRE_EN-US_DV5" (the reinstall software) and underneath that, the folders - boot - efi - sources - support.Picking just the E drive itself, message appears: Load driver: No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK.
I'm planning on getting either both of these computers, Aspire AS5538-1096 or Aspire Timeline 5810-4784. Everything else is understandable except the part of the processor.
The Aspire as5538 comes with an AMD Athlon 64 X2 Dual-core Processor L310 1.2GHz, 1 MB L2 cache. While the Aspire Timeline comes with an Intel Pentium Processor DU4199 1.3GHz, 2MB L2 cache. I mean, are intel making pentiums with dual core? Can it beat the Athlon 64 x2 1.2 dual core? Even if it costs more with the Aspire Timeline?
Here are links I found with some detailed information about these two products:
Aspire A5538-1096
[url]
Aspire Timeline 5810-4784
[url]
My main concern is, dual core, portability, and solid design. In better words, which is the best one?
Compaq Presario A931NR or Acer Aspire AS7720-6569?
Wondering which is the better choice? ...