I have my MBP setup with an external monitor and everything is fine except that when I'm using two programs, the toolbar (very top bar on the screen) doesn't move.
I know that I can go to display preferences and select which screen has the bar but what I'd like to do is have say Photoshop on one screen with its bar and InDesign on the other with its own bar. Is this not possible?
I'm thinking of purchasing a new macbook with the mini display port and upon research I have gotten reall confused about cables that go into it.
The one I am looking at is the cheaper mini display to dvi-d, from what I have gathered it does not support a res higher than 1920x1200 and will not support a dvi to vga port, but what I am really worried about is will it support a dual monitor set up (one screen the laptop screen and a standard other screen that does not have a higher resolution.
So will I be fine with that port of do I have to buy the really expensive one to do so all these reviews have me really confused.
Is it possible to hook up two external monitors with the new MBP?
View 6 Replies View RelatedI'm running Windows XP (32 bit) on Bootcamp on my 2008 MBP with nvidia 8600m GT graphichs card. I cannot select my external monitor to be the primary monitor because it's grayed-out (I can't select it where it says 'use this monitor as my primary monitor').
I just went onto nvidia's website and downloaded the latest drivers and installed them. No difference. Anyone know how I can achieve this?
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies View RelatedI am trying to run dual monitors on a d630 with Intel 965 video and the laptop, after reboot, will not hold its settings.
It always wants to revert back the VGA screen as primary and ignores the second DVI monitor.
I have tried undocking and removing the dock profile so it can re-establish it but no success.
having trouble with my second monitor that I am trying to connect.
I am using a DVI to HDMI cable and inputting it into the second screen (It is an lcd tv).
Windows 7 allows me to change the resolution of both monitors seperately. i made my regular monitor the same 1920 x 1200, but no matter what resolution i make the second screen, the edges, top bottom left and right are all cut off, sort of like a cropped version of what i should be seeing .....
I just picked up a Z laptop. Got the docking station the VGP-PRZ1. The dock has a vga and DVI connector. When I connect two monitors to the dock the software will only allow me to turn one on. I get an error "this gpu only supports a single display"
Does that mean I can not use 2 external monitors?
I'm trying to set up dual monitors, and can't seem to get it to work.
I'm using a external LCD with a DVI->VGA converter plugged into the laptop. The LCD knows there's a signal as when I plug it in it just goes blank as opposed to the "no signal" screen.
However the laptop doesn't seem to detect it. When I go to graphics properties it says "Multiple Display, blah blah, please connect another display". And there's no tab for another monitor or anything.
I just ordered a Vaio Z590 and am deciding what monitor(s) to order to go with it.
Specifically, I was wondering if it would drive a 30" monitor (2560x1600). The 9300m graphics card specs appear to support it, but I've heard that the Z supports only up to 1920x1200. I'm getting the docking station too,
If not, I was thinking of dual 24", but I've read that no one has gotten the Z to work with multiple external monitors either; is this true? In another post someone recommended the Matrox Triplehead2Go, but that doesn't appear to support 2 external monitors at 1920x1200 resolution + the internal screen.
I've got a new Dell Vostro 1500 with the Nvidia 8600M GT video card, and when I add a 2nd monitor to my display, the resolution of my laptop monitor drops to 1280x800. Anyone had this problem and know how to fix it? The 2nd monitor is an AOC 22LVWk, haven't tried it with any others yet.
View 15 Replies View RelatedJust ordered the [url] and was wondering... it has a VGA and an HDMI port. Does anyone know if I can run dual display on this? I plan to use it mostly as a desktop and occassionally as a laptop.
View 4 Replies View RelatedI just purchased these 2 new dual monitors whose input connectors only come in HDMI, DisplayPort, and Mini DisplayPort. I'm using a X230 with a Ultrabase 3 and I can't seem to get the 2nd monitor up and working... My first one is being used through the displayport direclty on my laptop (left side).
Â
Is it not possible to get both monitors using a combination of these cables? Would buying a converter (HDMI or displayport --> VGA) solve the problem?
I am trying to connect a dual monitor but it keeps telling me no signal. i don't know what to do.Â
View 6 Replies View RelatedI have a X230 (Dislay ports: VGA DP++). It is in a Port Replicator Series 3 with USB 3.0 (part number 433615W) (Dislay ports: VGA)
For display I have:
Lenovo Thinkvision 22" (no model number on case - 4 years old) 1680x1050 (Dislay ports: VGA DVI)
Benq GL2450 24" (Dislay ports: VGA DVI HDMI)
Numerous cables (DVI<->DVI VGA<->VGA HDMI<->HDMI)
How can I hook both monitors to the X230 for a dual external display (laptop monitor is not used)?
After running my B570 (1068) with an extended display, the unit went into hibernation. On wake-up the laptop screen is indecipherable garbage. The second display will run to show BIOS startup but then reverts to the built-in screen - which is illegible. Toggling the F3 key does not get a good screen.
Â
I read another post suggesting this is a hardware failure. What parts have failed?
I am picking up an external HD and will make a complete backup of my system with time machine. I will then install windows XP with bootcamp. I am going to format it as FAT32 so I have the ability to transfer files from mac to windows, but will that have an effect on game performance? I am mainly doing this to play black and white 2 and oblivion. I know oblivion will play well but how well will black and white 2 perform?
View 10 Replies View Relatedhow to do dual os from macbook, lets say OSX and XP both os run at the same time, what software do i need? is it true that if i do dual os the XP just can use like 32Gib of hard drive ? how stabilize dual os on macbook ?
View 3 Replies View RelatedI just want to be able to have two screens (1 monitor, the other my MBP screen) going at the same time and all that good stuff...
What I am looking for, if someone is willing, is for a specific list of hardware and software that I will need to do this (if possible). And in case it matters, no I do not have Windows installed via Boot Camp or anything like that.
The sites I have been looking at today are somewhat confusing even when it comes to what hardware to buy. I am in no way new to computers, so I have a general understanding of the components, but I just really need someone who has done this or knows how to do this, to basically just list everything I need.
all my uni friends were boasting about the new windows 7 beta. I Thought i would give it a try. Here's what i did and what you could do i you wanted to do the same as me:
- download windows 7 beta from the windows website. The iso file should be downloaded to your desktop. Leave it there.
- On your mac os x, go to applications -> utilities -> disk utility. select the iso file on the desktop and press burn, if a window appears, select the iso file in it.
- after it has burned, go to your bootcamp utility and create a partition for your windows. i chose 50gb for my windows.
- then, with the burned cd still in the dvd drive, select start installation.
- Your laptop will restart and it will boot diractly to your windows installer.
- select your language and press next. You should be presented with the select partition page........................
I dont own a mac but and thinking about getting one and i have a few questions. first off im not a fan of OSX so i would like to use win7, so how much will it cost for me to dualboot (cost of dual boot program plus win7 plus any other software i need free or not free)? also i know you can get 5-6hours on OSX (so ive been told, correct me if im wrong) how long of a battery life would i get with win7?
View 10 Replies View RelatedIt sure does look like that Clevo 18in revealed sometime ago.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
Im having problems trying to find a decent guide on how to do this,(Most of them are outdated and what not) but I want to have the ability to use Ubuntu and OSX.
I currently have Ubuntu in Virtual Box, but I would like for my whole system to be able to switch from OSX and Ubuntu and boot or w/e.
Also, I have Ubuntu saved on my external HD iso file. So will I need to actually burn it to disk?
I also read that you can use bootcamp to do this.
So whats the easiest way to do this without having to reinstall osx(if I really dont have to)
On the new MBP's, if you are running dual boot XP, what video core is the MBP using? The 9400 or 9600? Is there a way to swap while in XP?
View 3 Replies View RelatedI plunk down almost 3 grand for the new MBP and yet we still have to shell out another 100 clams for this DVI adapter in order to use the MBP on my 30" LCD?
View 6 Replies View RelatedIt sure does look like that Clevo 18in revealed sometime ago. This is not an OCZ Whitebook rebrand.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
Is it possible to have a different background/wall paper when running in Dual view monitor mode?
View 11 Replies View RelatedI have a 13.3" MBP and a HP LP3065 monitor. At times, I would like to use the monitor for more real estate. I know there is the Apple mini display port to dual-link dvi adapter. Are there any other options that I will be able to use my monitor at 2560x1600 resolution with the MBP?
The reviews for the apple adapter suck and basically all of them have flickering issues. I would hate to buy it, return it, and waste my time on something I know that has a great chance of failure.
I also have Logitech Z-5500 speakers that I would like to use with my Macbook. Would a toslink to mini-toslink cable work?
I'm on the lookout for external monitors (20-24" WS) that work well with MBPs (13" 2.53 model in particular). I'm leaning away from Apple Cinema Displays (due to their lack of support for non-Apple computers which I own. Pl. correct me if I'm wrong in doing so).
View 10 Replies View RelatedI've hooked my Macbook Pro 15" to an external Dell monitor, keyboard and mouse and everything seems to be working fine - I can put the laptop to 'sleep', then wake it up via the external keyboard and then use the external monitor as the main monitor with the laptop screen 'asleep'.
All working fine, but only when I'm using the power adapter. If I try and run from just the battery the laptop keeps going back to sleep. It 'wakes', but after a couple of seconds goes back to sleep.