Sony :: Will Z Drive 30" Monitor / Dual
Mar 25, 2009
I just ordered a Vaio Z590 and am deciding what monitor(s) to order to go with it.
Specifically, I was wondering if it would drive a 30" monitor (2560x1600). The 9300m graphics card specs appear to support it, but I've heard that the Z supports only up to 1920x1200. I'm getting the docking station too,
If not, I was thinking of dual 24", but I've read that no one has gotten the Z to work with multiple external monitors either; is this true? In another post someone recommended the Matrox Triplehead2Go, but that doesn't appear to support 2 external monitors at 1920x1200 resolution + the internal screen.
View 3 Replies
ADVERTISEMENT
Feb 27, 2010
I just picked up a Z laptop. Got the docking station the VGP-PRZ1. The dock has a vga and DVI connector. When I connect two monitors to the dock the software will only allow me to turn one on. I get an error "this gpu only supports a single display"
Does that mean I can not use 2 external monitors?
View 4 Replies
View Related
May 18, 2014
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies
View Related
Apr 7, 2009
I was wanting to put in a lager hard drive in my system, I noticed that it has a spot for 2 hard drives,
I was thinking about leaving in the factory drive and adding a second drive.
I was wondering if I would have any problems adding a second drive.
I was thinking a 320gig to a 500gig 5400rpm drive.
View 6 Replies
View Related
Feb 11, 2009
Just pulled the trigger on a Vaio VGNTZ290NDB for $1,439 on clearance from Sony Style.
Seems like a nice unit.
Question:
This unit comes with a 64GB SSD (1.8" PATA) and a 250GB HDD (2.5" SATA).
Given the age of the model line, I'm assuming that the PATA SSD is not of the same performance level as the new SATA SSDs, e.g., Intel X25-M.
Would it be simple enough to put in an X25-M in place of the 250GB HDD and then make it the boot drive? Or is the system limited to booting from the PATA SSD?
A dual SSD ultraportable would be... well... sweet.
View 5 Replies
View Related
Feb 1, 2010
I am trying to run dual monitors on a d630 with Intel 965 video and the laptop, after reboot, will not hold its settings.
It always wants to revert back the VGA screen as primary and ignores the second DVI monitor.
I have tried undocking and removing the dock profile so it can re-establish it but no success.
View 3 Replies
View Related
Jun 18, 2009
I have my MBP setup with an external monitor and everything is fine except that when I'm using two programs, the toolbar (very top bar on the screen) doesn't move.
I know that I can go to display preferences and select which screen has the bar but what I'd like to do is have say Photoshop on one screen with its bar and InDesign on the other with its own bar. Is this not possible?
View 7 Replies
View Related
Jul 13, 2009
having trouble with my second monitor that I am trying to connect.
I am using a DVI to HDMI cable and inputting it into the second screen (It is an lcd tv).
Windows 7 allows me to change the resolution of both monitors seperately. i made my regular monitor the same 1920 x 1200, but no matter what resolution i make the second screen, the edges, top bottom left and right are all cut off, sort of like a cropped version of what i should be seeing .....
View 4 Replies
View Related
Jun 10, 2009
I'm trying to set up dual monitors, and can't seem to get it to work.
I'm using a external LCD with a DVI->VGA converter plugged into the laptop. The LCD knows there's a signal as when I plug it in it just goes blank as opposed to the "no signal" screen.
However the laptop doesn't seem to detect it. When I go to graphics properties it says "Multiple Display, blah blah, please connect another display". And there's no tab for another monitor or anything.
View 4 Replies
View Related
Jul 21, 2009
I'm thinking of purchasing a new macbook with the mini display port and upon research I have gotten reall confused about cables that go into it.
The one I am looking at is the cheaper mini display to dvi-d, from what I have gathered it does not support a res higher than 1920x1200 and will not support a dvi to vga port, but what I am really worried about is will it support a dual monitor set up (one screen the laptop screen and a standard other screen that does not have a higher resolution.
So will I be fine with that port of do I have to buy the really expensive one to do so all these reviews have me really confused.
View 4 Replies
View Related
Jun 22, 2009
Is it possible to hook up two external monitors with the new MBP?
View 6 Replies
View Related
Oct 19, 2009
I'm running Windows XP (32 bit) on Bootcamp on my 2008 MBP with nvidia 8600m GT graphichs card. I cannot select my external monitor to be the primary monitor because it's grayed-out (I can't select it where it says 'use this monitor as my primary monitor').
I just went onto nvidia's website and downloaded the latest drivers and installed them. No difference. Anyone know how I can achieve this?
View 10 Replies
View Related
Aug 11, 2007
I've got a new Dell Vostro 1500 with the Nvidia 8600M GT video card, and when I add a 2nd monitor to my display, the resolution of my laptop monitor drops to 1280x800. Anyone had this problem and know how to fix it? The 2nd monitor is an AOC 22LVWk, haven't tried it with any others yet.
View 15 Replies
View Related
Apr 19, 2010
Just ordered the [url] and was wondering... it has a VGA and an HDMI port. Does anyone know if I can run dual display on this? I plan to use it mostly as a desktop and occassionally as a laptop.
View 4 Replies
View Related
Jul 19, 2014
I just purchased these 2 new dual monitors whose input connectors only come in HDMI, DisplayPort, and Mini DisplayPort. I'm using a X230 with a Ultrabase 3 and I can't seem to get the 2nd monitor up and working... My first one is being used through the displayport direclty on my laptop (left side).
Â
Is it not possible to get both monitors using a combination of these cables? Would buying a converter (HDMI or displayport --> VGA) solve the problem?
View 3 Replies
View Related
Jan 12, 2009
I'm doing a bit of research - I'm getting an M1730 as a replacement for a dead M1710 (Cheapest DELL XPS M1730 ever???) .. so I can't really change the spec of the machine until I get it .........
View 10 Replies
View Related
Apr 26, 2013
I am trying to connect a dual monitor but it keeps telling me no signal. i don't know what to do.Â
View 6 Replies
View Related
Aug 29, 2013
I have a X230 (Dislay ports: VGA DP++). It is in a Port Replicator Series 3 with USB 3.0 (part number 433615W) (Dislay ports: VGA)
For display I have:
Lenovo Thinkvision 22" (no model number on case - 4 years old) 1680x1050 (Dislay ports: VGA DVI)
Benq GL2450 24" (Dislay ports: VGA DVI HDMI)
Numerous cables (DVI<->DVI VGA<->VGA HDMI<->HDMI)
How can I hook both monitors to the X230 for a dual external display (laptop monitor is not used)?
View 3 Replies
View Related
Aug 6, 2014
After running my B570 (1068) with an extended display, the unit went into hibernation. On wake-up the laptop screen is indecipherable garbage. The second display will run to show BIOS startup but then reverts to the built-in screen - which is illegible. Toggling the F3 key does not get a good screen.
Â
I read another post suggesting this is a hardware failure. What parts have failed?
View 6 Replies
View Related
Aug 9, 2007
There is apparently TWO sata ports. An one them is open. I'm gathering the Ultra ATA is for the DVD burner. An then with the picture below. It shows that the port is open.
[url]
View 9 Replies
View Related
Oct 29, 2009
I have an HP Elitebook 6390P; I remember seeing for the Thinkpads someone could remove the CDROm Drive and put a hard drive into this slot and then put into the cdrom drive.
is it possible with the HP Elitebooks?
View 7 Replies
View Related
Jan 25, 2009
I am about to make a purchase on the Studio XPS 16..
However, my main issue is would it be able to drive my 2 Dell 3007WFP-HC displays?..
I am aware that the Studio XPS 16 has a HDMI and DisplayPort built it.. Provided I am able to get all the conversion cables, could this laptop drive my 2 30" monitors at their native (2560 x 1600) resolution?..
View 10 Replies
View Related
Feb 20, 2013
I want my Inspiron 14z Ultrabook to have two Operating Systems, Fedora (Linux) and Windows 7. Is it possible to use the SSD drive to accelerate the System's performance on both operating system?
Secondly, Can I still restore my machine to Factory settings???
View 1 Replies
View Related
Nov 28, 2008
I am considering a 24" monitor which I need t share as a second on my 1710, as well as the primary on my gaming rig (2X8800GTX SLI).
I want to drive it @ 1920*1200. I don�t want to use the VGA connector for one of the machines, when I do resolution drops to a max of around 1600*1100. So, I am looking at some of the monitors that have DVI and HDMI connectors. The thought was to connect one of the machines via HDMI with a special cable like one from bluejean cable, and use the other straight through, and choose a monitor with an easy one touch toggle between the two.
I read some horror stories that the HDMI link via a DVI-HDMI cable isn't optimal, and someitmes has its own resolution or sync limits. Does anyone know about this?
My other choice is a cheapo DVI switch, but it would be cool just to hit the input button.
View 10 Replies
View Related
Jan 2, 2009
It sure does look like that Clevo 18in revealed sometime ago.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
View 10 Replies
View Related
Jan 2, 2009
It sure does look like that Clevo 18in revealed sometime ago. This is not an OCZ Whitebook rebrand.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
View 10 Replies
View Related
Feb 26, 2008
Is it possible to have a different background/wall paper when running in Dual view monitor mode?
View 11 Replies
View Related
May 24, 2010
i want to buy a HD PVR but my laptop doesnt meet the system requirements needed, all i want to do is record it on my laptop and than transfer the files to my desktop pc so no editing or any other software will be needed on my laptop
heres the laptop i own
[url] (it sais SP2 on it but im going to install SP3 which is needed for the HD PVR to work aswell)
and heres the HD PVR system requirements
Hauppauge Computer Works Ltd : HD PVR
View 9 Replies
View Related
May 17, 2010
I have an AR-790U laptop with an Intel 4965AGN wireless adapter. According to the wireless device manager provided by Sony, it is not recommended to enable 2.4GHz and 5GHz simultaneously.
I was curious to know if this restriction is present in other Sony laptops? Or if it has been lifted/deprecated?
And for those in the know, is this a limitation of the Intel device or the way Sony implemented some other part of the wireless functionality? (e.g. antennas)...
View 6 Replies
View Related
Sep 15, 2009
I have a VGN-AR550U laptop. According to the property page for the Display adapter it is: NVIDIA GeForce 8400M GT. I want to be able to run a Powerpoint presentation where the slides are being shown on a big screen and the notes are shown on the laptop screen. I understand this has to be done thru a dual monitor type of setup. Can I test this without actually hooking up the big screen or does it automatically go into a dual monitor mode when you plug in the second monitory. When I select presenter view it says I don't have a second monitor.
View 3 Replies
View Related
