I have a VGN-AR550U laptop. According to the property page for the Display adapter it is: NVIDIA GeForce 8400M GT. I want to be able to run a Powerpoint presentation where the slides are being shown on a big screen and the notes are shown on the laptop screen. I understand this has to be done thru a dual monitor type of setup. Can I test this without actually hooking up the big screen or does it automatically go into a dual monitor mode when you plug in the second monitory. When I select presenter view it says I don't have a second monitor.
I am planning to get 2x 23inch monitors 1920x1200. So now here is the situation. I want to connect both of these to my sony vaio z. I have found solutions such as the Matrox DualHead2Go box and what not.. But i was wondering if i can get the sony z docking station and use that for dual output. Unlike some other threads that i've read my situation would be to plug the hdmi on the laptop to monitor1 and the dvi from the docking station to monitor 2.
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
Whats the major difference between 16.4" VAIO Display (1600x900) and 16.4" VAIO extra-wide HD display (1920x1080). Upto what angle I could see my display in VAIO Display (1600x900)? Can I watch HD movies perfectly in VAIO Display (1600x900) ?
Just pulled the trigger on a Vaio VGNTZ290NDB for $1,439 on clearance from Sony Style.
Seems like a nice unit.
Question:
This unit comes with a 64GB SSD (1.8" PATA) and a 250GB HDD (2.5" SATA).
Given the age of the model line, I'm assuming that the PATA SSD is not of the same performance level as the new SATA SSDs, e.g., Intel X25-M.
Would it be simple enough to put in an X25-M in place of the 250GB HDD and then make it the boot drive? Or is the system limited to booting from the PATA SSD?
A dual SSD ultraportable would be... well... sweet.
After running my B570 (1068) with an extended display, the unit went into hibernation. On wake-up the laptop screen is indecipherable garbage. The second display will run to show BIOS startup but then reverts to the built-in screen - which is illegible. Toggling the F3 key does not get a good screen. Â I read another post suggesting this is a hardware failure. What parts have failed?
I've problems starting my Vaio SZ2. They occured one day without changing anything (Hardware or Software) before.
If i push the power button, the screen backlight turns on but remains grey/black. No vaio logo, no boot screen, no bios access! I unscrewed the whole computer (3 years old) and checked all the cables. Then i released the screen cable from the graphic chip and tried booting with an external display! And that worked!
It seems to be a problem of the display/display cable or the graphic card.
I just bought a second-hand Sony Vaio TZ 390, which came with Vista. I updated to Windows 7 and installed all the drivers. Everything seems to work but I cannot get the Vaio TZ to output to the external display. What happens is the external lcd gets a signal initially when I turn on the Vaio TZ (connected to the lcd) but it loses the signal shortly after I log into Windows 7. Btw, the lcd I use is a Samsung 2333HD.
Recently I have been receiving a ridiculous amount of BSOD's. Today alone I have received at least 15 of them and they all display the same message "There was a display driver timeout".
It always happens randomly and I can never repeat the exact situation. It just BSOD when it wants.
The error code which appears is: atikmdag 0x00000116 (0x86eb9510, 0x8f228c14, 0x00000000, 0x00000002)
I now own a Sony Vaio AW31 S/B notebook with full HD display (double lamp but non-LED).
Quite impressive machine, but I have one problem: In windows and IE8, the colours look a bit too "punchy" and contrasty for my taste.
I found that there's an ICC profile included for the display which by default is applied in the Windows colour management. When I watch my photos in the Vista photo gallery, the profile seems to be applied correctly, as the photos look very good and natural, but when I use a photo for example as a desktop wallpaper, it looks much more contrasty and not so natural anymore.
Vista itself also looks quite contrasty, and also many websites in IE8.
I already tried to turn off the colour management in the Vaio control center and find proper settings in the GPU driver (as I did with all my previous laptops without colour profiles) but didn't succeed in finding a natural setting.
So my questions: How do you overcome this "problem"? Anyone maybe found good screen settings without colour management (which doesn't make so much sense if you don't calibrate your screen by yourself)? Or did you get used to the punchy look of Windows?
Is there any way to make Vista use the colour profile also for its user interface?
I want to use my notebook to do a presentation in class. However, no matter which projector I connect to my Vaio SZ440, the display is unable to be shown on the projector.
I've tried Fn+F7, not working, tried stamina mode, not working, tried speed mode, not working. I've tried "Connect to a projector or other external display", not working. I've no idea what I should do. I really need to fix this or else I'll get screwed this semester. Every other notebook the projector connects to, it will automatically detect and show the display. Only mine is like this.
Please help. About 1 year ago I didn't experience any problem when connecting to a projector. I didn't remember what exactly I do to make it go bad. But I really need it to work this semester.
I've got a european Sony Vaio Z (first generation), which seems to have some major overheating issues, especially when it's connected to an external display.
Setup: Sony Vaio Z11VN -> Docking station -> NEC2690WUXi (running at 1920x1200)
Here's a summary of temperatures when this machine is in SPEED mode (Nvidia 9300gs) in Windows XP (idle)
Clearly, the temperature drops if I switch to STAMINA mode, or if I unplug the laptop from the docking station, however, in the latter case the temperature drops to perhaps 70C.. so that is without running it on the external 1920x1200 display.
and when running 3d applications or games, the laptop can simply shut itself off for no reason whatsoever (overheated?)
I've heard about overheating problems of the NVIDIA GPUs.. is this such a case? (NVIDIA 9300GS)
I'd like to know if anyone else have had this problem with their Vaio Z (i've seen ppl having problems with the FZ)
My model is a VGN-Z11VN (swedish, although distributed via the UK)
i have a sony vaio c2z - nvidia geforce 7400; x-black lcd
i have had a lot of problems with my display since august. although i didn't notice at the time, it happened soon after i installed the Win 7 RC.
when i start the laptop up the screen looks all distorted and the colours arent correct:
[url] [url] [url] [url]
but when i take screencaps and connect it to another monitor everything looks fine.
[url] [url]
i assumed the screen was knackered, but i installed a game a few weeks ago and it brought the display back to life, only for it to look crap again when i restarted. this also happened when i did a clean install of vista, only for the display to go bad when the updates installed.
i have tried many times, but have been unable to replicate this...............
I have a Sony Vaio - VGN-NR180E and its 1024 by 768 pixels. For some reason when i was uninstalling program it changed my laptop screen and now I can't make it stretch or move the LCD screen. Its just in the middle and it has like black margin all around it. how can i make my laptop to be a fullscreen again? Please help me. During the time i was uninstalling programs I don't know what uninstall but it did show or said something with driver and said to restart your computer and I did and when the window pops up there were black margins around my window and my mouse can only stay inside my window.
I've got a co-worker that just got an E6400 and E-Port Plus docking station with 130W power supply.
The machine is running 32-bit Windows XP with an nVidia Quadro NVS 160m and she has two Dell 2001FP monitors connected to the DVI ports on the docking station.
I can't seem to get dual displays on the external monitors. With the laptop closed and docked, the machine only recognizes one of the monitors that is plugged in to the dock.
I have a 13.3" MBP and a HP LP3065 monitor. At times, I would like to use the monitor for more real estate. I know there is the Apple mini display port to dual-link dvi adapter. Are there any other options that I will be able to use my monitor at 2560x1600 resolution with the MBP?
The reviews for the apple adapter suck and basically all of them have flickering issues. I would hate to buy it, return it, and waste my time on something I know that has a great chance of failure.
I also have Logitech Z-5500 speakers that I would like to use with my Macbook. Would a toslink to mini-toslink cable work?
I have a X230 (model 2357G) with a type 4338 dock. I'm currently running dual 1920x108 monitors via the dual DVI ports in the dock. But I wonder if the dual Displayports in the dock can handle something with a higher resolution like dual 3840x2160 monitors ?
It sure does look like that Clevo 18in revealed sometime ago.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
It sure does look like that Clevo 18in revealed sometime ago. This is not an OCZ Whitebook rebrand.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
i want to buy a HD PVR but my laptop doesnt meet the system requirements needed, all i want to do is record it on my laptop and than transfer the files to my desktop pc so no editing or any other software will be needed on my laptop
heres the laptop i own
[url] (it sais SP2 on it but im going to install SP3 which is needed for the HD PVR to work aswell)
I just picked up a Z laptop. Got the docking station the VGP-PRZ1. The dock has a vga and DVI connector. When I connect two monitors to the dock the software will only allow me to turn one on. I get an error "this gpu only supports a single display"
I have an AR-790U laptop with an Intel 4965AGN wireless adapter. According to the wireless device manager provided by Sony, it is not recommended to enable 2.4GHz and 5GHz simultaneously.
I was curious to know if this restriction is present in other Sony laptops? Or if it has been lifted/deprecated?
And for those in the know, is this a limitation of the Intel device or the way Sony implemented some other part of the wireless functionality? (e.g. antennas)...
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
I just ordered a Vaio Z590 and am deciding what monitor(s) to order to go with it.
Specifically, I was wondering if it would drive a 30" monitor (2560x1600). The 9300m graphics card specs appear to support it, but I've heard that the Z supports only up to 1920x1200. I'm getting the docking station too,
If not, I was thinking of dual 24", but I've read that no one has gotten the Z to work with multiple external monitors either; is this true? In another post someone recommended the Matrox Triplehead2Go, but that doesn't appear to support 2 external monitors at 1920x1200 resolution + the internal screen.
