I own a VAIO VGN-N395E/B laptop. One day I found that the display is not working. The laptop boots fine but there is no display.
Is the display card a separate unit or integrated with mother board. If that is the case will I have to change the mother board?
Whats the major difference between 16.4" VAIO Display (1600x900)
and 16.4" VAIO extra-wide HD display (1920x1080). Upto what angle I could see my display in VAIO Display (1600x900)? Can I watch HD movies perfectly in VAIO Display (1600x900) ?
I've problems starting my Vaio SZ2. They occured one day without changing anything (Hardware or Software) before.
If i push the power button, the screen backlight turns on but remains grey/black. No vaio logo, no boot screen, no bios access! I unscrewed the whole computer (3 years old) and checked all the cables. Then i released the screen cable from the graphic chip and tried booting with an external display! And that worked!
It seems to be a problem of the display/display cable or the graphic card.
How much would the difference in the Display be if I choose:
i) 16.4" VAIO Display (1600x900) with NVIDIAŽ GeForceŽ 310M GPU (512MB VRAM)
While customizing the F instead of:
ii) 16.4" VAIO Premium Display (1920x1080) with NVIDIAŽ GeForceŽ GT 330M GPU (1GB VRAM)
The second option is Full HD and seems to have a more powerful graphics card but I heard with the first one I would have more battery life?
What are the positives and negatives of each?
if the US version of the Sony VAIO F Series Display is wide gamut? EU Sony says it's 100% Adobe RGB coverage. What is the US version?
View 5 Replies View RelatedI just bought a second-hand Sony Vaio TZ 390, which came with Vista. I updated to Windows 7 and installed all the drivers. Everything seems to work but I cannot get the Vaio TZ to output to the external display. What happens is the external lcd gets a signal initially when I turn on the Vaio TZ (connected to the lcd) but it loses the signal shortly after I log into Windows 7. Btw, the lcd I use is a Samsung 2333HD.
View 10 Replies View RelatedI have a VGN-AR550U laptop. According to the property page for the Display adapter it is: NVIDIA GeForce 8400M GT. I want to be able to run a Powerpoint presentation where the slides are being shown on a big screen and the notes are shown on the laptop screen. I understand this has to be done thru a dual monitor type of setup. Can I test this without actually hooking up the big screen or does it automatically go into a dual monitor mode when you plug in the second monitory. When I select presenter view it says I don't have a second monitor.
View 3 Replies View RelatedRecently I have been receiving a ridiculous amount of BSOD's. Today alone I have received at least 15 of them and they all display the same message "There was a display driver timeout".
It always happens randomly and I can never repeat the exact situation. It just BSOD when it wants.
The error code which appears is:
atikmdag 0x00000116 (0x86eb9510, 0x8f228c14, 0x00000000, 0x00000002)
I now own a Sony Vaio AW31 S/B notebook with full HD display (double lamp but non-LED).
Quite impressive machine, but I have one problem: In windows and IE8, the colours look a bit too "punchy" and contrasty for my taste.
I found that there's an ICC profile included for the display which by default is applied in the Windows colour management. When I watch my photos in the Vista photo gallery, the profile seems to be applied correctly, as the photos look very good and natural, but when I use a photo for example as a desktop wallpaper, it looks much more contrasty and not so natural anymore.
Vista itself also looks quite contrasty, and also many websites in IE8.
I already tried to turn off the colour management in the Vaio control center and find proper settings in the GPU driver (as I did with all my previous laptops without colour profiles) but didn't succeed in finding a natural setting.
So my questions:
How do you overcome this "problem"? Anyone maybe found good screen settings without colour management (which doesn't make so much sense if you don't calibrate your screen by yourself)? Or did you get used to the punchy look of Windows?
Is there any way to make Vista use the colour profile also for its user interface?
I want to use my notebook to do a presentation in class. However, no matter which projector I connect to my Vaio SZ440, the display is unable to be shown on the projector.
I've tried Fn+F7, not working, tried stamina mode, not working, tried speed mode, not working. I've tried "Connect to a projector or other external display", not working. I've no idea what I should do. I really need to fix this or else I'll get screwed this semester. Every other notebook the projector connects to, it will automatically detect and show the display. Only mine is like this.
Please help. About 1 year ago I didn't experience any problem when connecting to a projector. I didn't remember what exactly I do to make it go bad. But I really need it to work this semester.
I've got a european Sony Vaio Z (first generation), which seems to have some major overheating issues, especially when it's connected to an external display.
Setup:
Sony Vaio Z11VN -> Docking station -> NEC2690WUXi (running at 1920x1200)
Here's a summary of temperatures when this machine is in SPEED mode (Nvidia 9300gs) in Windows XP (idle)
GPU: 92C(198F)
HD0: 41C(106F)
Temp1: 66C(151F)
Core0: 78C(172F)
Core1: 78C(172F)
Clearly, the temperature drops if I switch to STAMINA mode, or if I unplug the laptop from the docking station, however, in the latter case the temperature drops to perhaps 70C.. so that is without running it on the external 1920x1200 display.
and when running 3d applications or games, the laptop can simply shut itself off for no reason whatsoever (overheated?)
I've heard about overheating problems of the NVIDIA GPUs.. is this such a case? (NVIDIA 9300GS)
I'd like to know if anyone else have had this problem with their Vaio Z (i've seen ppl having problems with the FZ)
My model is a VGN-Z11VN (swedish, although distributed via the UK)
I am planning to get 2x 23inch monitors 1920x1200. So now here is the situation. I want to connect both of these to my sony vaio z. I have found solutions such as the Matrox DualHead2Go box and what not.. But i was wondering if i can get the sony z docking station and use that for dual output. Unlike some other threads that i've read my situation would be to plug the hdmi on the laptop to monitor1 and the dvi from the docking station to monitor 2.
View 10 Replies View Relatedi have a sony vaio c2z - nvidia geforce 7400; x-black lcd
i have had a lot of problems with my display since august. although i didn't notice at the time, it happened soon after i installed the Win 7 RC.
when i start the laptop up the screen looks all distorted and the colours arent correct:
[url]
[url]
[url]
[url]
but when i take screencaps and connect it to another monitor everything looks fine.
[url]
[url]
i assumed the screen was knackered, but i installed a game a few weeks ago and it brought the display back to life, only for it to look crap again when i restarted. this also happened when i did a clean install of vista, only for the display to go bad when the updates installed.
i have tried many times, but have been unable to replicate this...............
I have a Sony Vaio - VGN-NR180E and its 1024 by 768 pixels. For some reason when i was uninstalling program it changed my laptop screen and now I can't make it stretch or move the LCD screen. Its just in the middle and it has like black margin all around it. how can i make my laptop to be a fullscreen again? Please help me. During the time i was uninstalling programs I don't know what uninstall but it did show or said something with driver and said to restart your computer and I did and when the window pops up there were black margins around my window and my mouse can only stay inside my window.
View 3 Replies View RelatedTrying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies View Relatedi bought a Sony VGN-AW31XY/Q notebook. Fast processor, 2 SSDs, 18.4" display, 8GB ram AND a antiglare display.
BUT it's a wide gamut display and i'm a webdesigner. I didn't know there is such a huge difference between this and a "normal" display. Red and green are oversaturated like hell.
My question: HOW or CAN i change the colors to "normal"? The point is, calibrating Photoshop or any other color managed software is no problem. But i need color mangagement for ANY other software too (Flash, Google Chrome and so on). There must be a solution.
Isn't there a tool that loads on startup where i can adjust the colors? Not only brightness, contrast and gamma levels but saturation and hue also?
Does anyone have a link to a website or PDF describing how to properly open and disassemble a VAIO VGN-SZ75GN?
I have a VAIO VGN-SZ75GN, bought about 8 months ago, and now I want to exchange the built-in hard-disc with a solid-state disc.
I need some guide with illustrations/pictures, how to reach the disc
I have just been given a VAIO PCG8A2M (GRX316MP) , i was told "it's broken but if you can fix it yo can have it" so having a quick look at it there's no sign of life on the display but the lights come on and i can here the HDD heads moving about.
Looking a little more i found that all the ram is missing , so now im not sure if its worth buying some ram to see if it works or not ? The lack of ram would prob explain the lack of display but i wonder if i should be getting POST beeps at least, which im not.
So my question is if a VAIO had no ram should (if all else was working) it be getting POST beeps ?
Just performed a successful XP downgrade on my Vaio Z520, but have noticed that on this copy of the Vaio Silver Desktop Theme/Appearance doesn't exist.
I had it on my SZ and loved it over the XP Blue. Is there a way to get it back? I still have the restore discs from the SZ.
I don't know whats the diference (besides the price), between VAIO TZ295N & VAIO TZ395N. Specs in all the websites I've checked say they have exactly the same components: Intel coreduo 1.33Ghz 2GB RAM DVD-RW and 64GB SSD Hardrive. I was wonder if the diference might be in the hard drive interface, with the TZ295N being PATA and TZ395N being SATA.
View 3 Replies View RelatedI'm wondering if the Blu-ray optical drive (Panasonic UJ-232A) of the (old) VAIO Z series will be able to fit into the (new) VAIO Z series? I would really appreciate it if anyone is able to answer my question.
The reason I'm asking is because I'm seriously thinking of selling my VAIO Z690 & just buying the base Sony VAIO Z (VPCZ112GX/S). I may just be able to afford that base model & the icing on the cake will definitely be the UJ-232A drive being able to fit into the (new) VAIO Z series & work.
Am planning to get a sony laptop for me. The design simply rocks I am getting mixed reviews about cw and E series. But i made up my mind to get one.
My budget is aroung 40000rupees. Thats around 800$. So suggest me a better one between these two for occasional moderate and less(mosltly) demanding games. I dont care whether its 14 or 15 inch.
Am looking at lower end versions of both the models.
Only difference is CW uses Nvidia Geforce 310 and the E series uses some Radeon 5000 series one. CW has 14 inch screen whereas E series has a 15.5 inch screen. In the models which i am looking at both have matte finish and both has WXGA:1366 x 768 VAIO Display.
which one should i go for. whether the screen quality will be on par to Inspiron one atleast? ( I dont need HD).
im planning on using the laptop for videos, photoshop and a bit of gaming, maybe even a bit more gaming :-)
The Vaio F Series only has 330M Nvidia Graphics Card with i7QM and up to 8GB of Ram and up to 256GB SSD.
The E Series has ATI 5650 (a less powerful version, reduced clock speed) combined with a i5 520M with up to 6Gb of Ram and up to 500GB of HDD ? Why can i not choose SSD ?
if I can use the AC Adapter of a Vaio TT on the Vaio Z. The standard AC Adapter that comes with the Vaio Z is of 19.5V and the one for the Vaio TT is of 16V, which I don't know if it's enough for the Vaio Z to function properly or if there could be any problem or damage. Both machines have batteries of 10,8V.
I have an undervolted Vaio Z by the way (last multiplier at 0.9875) so I don't know if this could help in any way for my Z to work ok with the TT AC Adapter.
Sony Utilities DLL
Vaio Entertainment Platform
Are they even needed when upgrading to Win7 RTM x64
I have this "problem" since I got my Z. When I start vaio update 3 utility I get this error "messageID=0008" there are no updates for your model bla bla...
However when I go to vaio support page, there are some new updates for my Z590N model (new Bios, USB patch...)
I have downloaded new version of Viao Update utility 3.2.something but I had to uninstall my current version (3.1.something), which I did. However when I started this new setup message poped up "there is no previous version installed" - abort.
I have checked esupport page where is said if you have problems with Vaio Update 3, to download Sony Shared Library which suppose to contain vaio update utility), I run installation but it doesn't install Vaio Update 3
Now, I can live with this esupport page regular visit updates,
how do i access the bios on my sony vaio fw? model number: VGN-FW139E
View 4 Replies View RelatedHow To Re-install My Sony Vaio Laptop I Tried To Restore But Is Not Possible Secondly Is It Possible To Change The Language From Spainish To English
View 3 Replies View RelatedWhich do you think is better and why?
View 10 Replies View Related I was googling information regarding a sony laptop I am interested in buying.
I currently own a vaio vgn-fs640 which is working damn good and now I plan to buy another vaio laptop.
I have selected two sony models but I am unable to decide which one to buy.
The first model is vaio SR
(http://www.sony.co.in/product/vgn-sr56gg)
And the second model is vaio CS
(http://www.sony.co.in/product/vgn-cs...vgn-cs36gj_qe1) ......