I just got my new Sony Vaio SR. I'm going to burn the recovery discs, and then wipe the entire hard drive clean and get rid of all the partitions and install Windows 2000 and Windows XP. But neither Win2k nor WinXP setup will run for some reason
I already installed win 7 x64 on my laptop, but webcam and special key with Fn still don't work. Someone can provide me these suitable softwares?. I also found them on sony's page but they are only used for win vista.
family member install some additional memory in her Sony VAIO laptop, but seem to be having a problem. Its a VGN-C290 model (May 2007) and currently has one 1GB chip installed & has one open slot. It allows a max of 2GB.
Now, I have purchased an additional 1GB chip from Crucial.com, but after installing it in the one open slot, it appears that it is not recognizing it at all. The laptop will turn on, but doesn't get to the XP screen. Not even the Sony VAIO/Phoenix welcome screen either.
I have never had a problem with Crucial memory, but I contacted them directly to maybe help with this problem. They basically told me to make sure it is really seated in there good and apply a lot of pressure. They also had me put the Crucial memory in the slot #1 where the original Sony memory was. Neither worked.
The only other thing they suggested was that it was a BIOS related issue & to somehow update the BIOS. I checked & it currently is running BIOS version #R0080J4. I'm trying to determine if this is the latest version. If not, then how to update it.
my sytem setup after a clean install of vista home premium.
I think I loaded all the driver ect after the clean install as per the instruction in a post on this site, I then istalled SP1 on.
My first question is that when I boot up the system it boots fine to the desktop but then the HD disk light stays on for a good few minuets with CPU usaged in the 3%-10% ranged will this is going on, after that the HD light just flikers constantly......is this right?
2 Should I load Sony update prgram and run it and Windows update?
3 I have not loaded any Sony stuff so no keys like eject or BluRay etc work I cant seem to find what drivers are need and I dont wont to load all sorts of stuff on as that would defeat the perpuse of a clean install. I have only 50 processor runing after booting up
I ahve a few other thing i like to ask but I will leave that for another post as I think thats enough question for now!
Just had a hard drive failure on my VGN-BX195ep lapton, I bought a new hard drive, but when installing one of my recovery discs (application disc) is not recognised.
I have a new Vista Home Premium here unsed, so thought I would try that. It installs fine, but I am really struggling to get the Sony Drivers to make it work.
I am without Wireless Lan, Flash drives and also have ? makrs on device manager on Biometric processor (fingerprint I guess) Mass Storage Controller, and two unknow devices which are listed as Intel 82891FBM LPC INt Controllers.
I have spoken to Sony support who claim the original installed drivers should work, but they they have errors on intall due to wrong operating system.
where I can find drivers?
why the Wireless lan does not work as it seems fine in the device manager? But when turned on, apart from the light on the front it is not working?
I have a Vaio VGN-CS16G/R and why is is that after installing Win7 RTM x64 and installing the necessary drivers, I DON'T see the "adjust brightness slider" on the power options? With my other laptops with the same OS, I can see that slider completely.
Also, I when I install Vaio Launcher which I got from the extracted Sony Notebook Utilities installer, it returns an error of:
I know that we really don't need to have a million threads on the subject, but I haven't seen many SR tutorials. If this stays open, maybe it will help other older SR owners when they upgrade to Windows 7.
What you need before you do your upgrade:
Firmware Extension parser
Sony Shared Library
Sony Notebook Utilities
Synaptics Touchpad drivers
Fingerprint Scanner driver
I installed Win7 Pro as a clean install. I have a 320gb drive that I formatted and partitioned into 3 parts, 40gb for the OS, 5gb for the pagefile and the rest for a storage partition.
I use the storage drive to put all of my user-created files. That make it easier for me to locate an item and makes backing up my personal files alot easier. I think it also reduces fragmentation on your OS drive...........
I just bought a new sony vaio laptop. I wanted to install the newest 9.4 ATI drivers for the gpu. So heres what happened:
- Downloaded newest drivers from ati official site - Went to the uninstall programs section in control panel, closes thing I could find to ati drivers was "Ati catalyst install manager", so i uninstalled it and it uninstalled ati drivers within the process. - Then restarted the laptop - Then installed newest drivers with the catalyst control center. - Restarted laptop - After the restart the highest available resolution was 1400x1050, I couldn't find the ati control centre and can find no evidence of the laptop even recognizing the ATI GPU after the restart.
I've gone through this sequence twice now and each time the drivers haven't been updated properly and the same thing has happened.
I've restored the system so now I have the 8.4 drivers on my gpu but I really can't figure out how to update them,
Sony vaio -2.66GHz core 2 duo -Ati HD 3650 512mb GDDR3 -4GB DDR2RAM -Vista 64-bit -320GB HDD -1920x1080 Full HD display
I have a Japanese VGN-Z90NS, and after getting it back from Japan for a minor repair, decided to put Vista Ultimate x64 on there to take advantage of my entire amount of memory.
Some may have seen this thread: Sony Z HD install and 64bit upgrade problems
On at least the older Vaio Z series (the Z90, Z5xx in the USA, etc.), I have confirmed that the EFI thing is an issue if you try to install a slipstreamed SP1. I happen to have a genuine Vista Ultimate x64 install disc that is RTM, and it installed just fine with no EFI issues.
To get the 64-bit original Sony drivers, download them here or here.
Once you download all of the Sony drivers, download Universal extractor from here, and run it against all of the EXEs you downloaded to strip the model check.
To get the Intel 4500 graphics driver, download it here
NOTE: My Z does not have the built-in camera or fingerprint security, so you'll have to figure that out on your own. Somehow my notebook no longer has bluetooth after being fixed (looking into that ...), so that isn't in this list either. I do have one device that I can't find a driver for, and I bet it's bluetooth since everything else is fine. I'll update if I sort it all out.
Install Process that works: 1. Vista x64 2. Vista x64 service pack (if needed) 3. Intel chipset driver - reboot required 4. Intel Matrix Storage Manager (I have the RAIDed SSDs and definitely need this) - reboot required.......................
I tried to do a clean install from windows 7 starter to Windows 7 home premium on my new Sony vaio Vpc-w21z1/l
Everything looks good, i installed all drivers and the software needed to works ok, but the Sony smart network does not work. it wont start at startup, so i go to the c:programs and start from there, it appears the window but i don't have the options to turn on and off the wwan, wireless or bluetooth.
The problem is that even the wireless and bluetooth is installed it can't find networks, and the wwan after i reboot 2 times the computer it disapears. i installed the updated version of smart network 3days old and even that does not work.
I share with You the steps I've made to install a fresh Win 7 on A Vaio VPCF11Z1E (EU model)
1 Before anything else be sure to make Your recovery disks If You haven't already done them. It's very important to actually do them since we'll need them later. You will use them for a future installation of the bundled utilities You may require.....
if there was a way to do a clean install of Vista (preferably Ultimate 64-bit) on the Vaio Z and have functioning s1/s2 and speed/stamina and Wlan controls. I found the guide for 7, I was wondering if there was something like it for vista, or at least a place where i can get the drivers. My viao Z came with alot of "bloatware", and i'd like to have it snappy.
I have an FW11M which I formatted when I bought it, put on vista ultimate and after a weekend of fiddling, got all of the devices detected with correct drivers installed.
Anyway, now I would like to update the graphics drivers to the new ATI 9.1 catalysts except that every time I try, I run the setup, it appears as though it is working and then says installation complete...
however, it changes nothing. Device manager still reports the old driver version and the catalyst control centre does not run
Bought a VGN-FW26 over the weekend (ATI HD3650, 2.40 Core Duo, 4GB RAM, Vista Home Premium).
On bootup, tried out a few games (mainly Fallout 3, Rainbow Six Las Vegas). Everything was running smooth, especially Rainbow Six at full resolution). This is with all the factory-included bloatware running.
I got annoyed at the bloatware, so performed a semi-clean install of Vista (ie. reformatted comp, reinstalled Vista, cancelled the installation process for the Sony programs ... then manually installed a selected number of programs using the VAIO Recovery Centre. These programs consisted several of the essentials from the programs list, and ALL the drivers).
Now, when I run the for-mentioned games, there's a noticeable increased lag for those games. I have even removed optimised Vista by disabling some unnecessary services, as well as made sure there are no unnecessary background programs running (e.g. McAfee)
In addition, I haven't been able to install the Catalyst Control Center, the VAIO Recovery Center only lets me install the ATI driver (I was thinking perhaps the lag in games is because my graphics card is running in a "maximise batteries" mode?) Is there anyway I can extract the Catalyst Control Center install from the recovery disks/drive?
I downloaded all win 7 drivers, and I'm ready for a clean install of Windows 7 Ultimate 64b on my Vaio. I wonder whether it would be wise to first install the bios upgrade for Win 7, version R4041M3, before I start the OS installation?
i just reinstalled winxp sp3 on a sony s3xp, i don't have the vaio installation cd but i did a clean reinstall of windows xp and installed essential drivers but it was quite slow, eg seconds to load a directory, or long pauses during web browsing
now i've installed all the original drivers and utilities and am running without power saving but it's still sluggish, eg the mouse pointer jumps about the screen rather than moves continuously when the cpu is under any load at all