I already installed win 7 x64 on my laptop, but webcam and special key with Fn still don't work. Someone can provide me these suitable softwares?. I also found them on sony's page but they are only used for win vista.
View 6 RepliesI just got my new Sony Vaio SR. I'm going to burn the recovery discs, and then wipe the entire hard drive clean and get rid of all the partitions and install Windows 2000 and Windows XP. But neither Win2k nor WinXP setup will run for some reason
View 4 Replies View RelatedI tried looking around the forum and couldn't find anything.
I'm having a hard time installing Windows 7 x64 on Vaio TT.
It says "On EFI systems, Windows can only be installed to GPT disks."
My problem is that I bought a VAIO laptop (VGN-FW31M) and it came with windows vista. So I formated it and installed Windows XP PRO SP·3.
(I had the common SATA driver problem but I managed to solve it).
The problem comes when I try to install any driver, even the CHIPSET driver.
I get a message saying:
"This computer does not meet the minimum requirements for installing this software. Setup will exit"
I got all the drivers from the sony official site.
if this is possible ?
View 3 Replies View Relatedfamily member install some additional memory in her Sony VAIO laptop, but seem to be having a problem. Its a VGN-C290 model (May 2007) and currently has one 1GB chip installed & has one open slot. It allows a max of 2GB.
Now, I have purchased an additional 1GB chip from Crucial.com, but after installing it in the one open slot, it appears that it is not recognizing it at all. The laptop will turn on, but doesn't get to the XP screen. Not even the Sony VAIO/Phoenix welcome screen either.
I have never had a problem with Crucial memory, but I contacted them directly to maybe help with this problem. They basically told me to make sure it is really seated in there good and apply a lot of pressure. They also had me put the Crucial memory in the slot #1 where the original Sony memory was. Neither worked.
The only other thing they suggested was that it was a BIOS related issue & to somehow update the BIOS. I checked & it currently is running BIOS version #R0080J4. I'm trying to determine if this is the latest version. If not, then how to update it.
How To Re-install My Sony Vaio Laptop I Tried To Restore But Is Not Possible Secondly Is It Possible To Change The Language From Spainish To English
View 3 Replies View RelatedI picked up my new Z112GX last night and today after making sony's recovery discs i wiped and started a clean windows 7 professional install.
After this guide you should have a clean windows install with no "yellow" devices under system.
Windows 7 X64 Professional ISO: http://msft-dnl.digitalrivercontent..../X15-65805.iso
Then use the key on your machine. It will give activation issues jsut run through the automated phone activation and you will be fine. SEE BOTTOM POST FOR EASIER METHOD
DRIVERS: http://esupport.sony.com/US/perl/swu...PCZ112GX&LOC=3 .....
Has anyone installed the newest VAIO Event Service from the following link [url]
I tried it and I got an error message that said "Previous Vaio Event Service is not intalled. Upgrade will be cancelled." I already have previous Vaio Event Service from previous installation.
The software should work with any VAIO Notebooks, not just FW. If anyone could try it I really appreciate it and please mention which VAIO Model you have.
I just need to get this one more thing clear:
I'll buy the VGN-Z540NAB and put in 3 GB of DDR3 ram and a 120 GB Vertex SSD drive.
But - I have been wondering how I am going to do the harddrive part - this is my plan.
1. Make a clean install on the old haddrive as soon as i get the notebook using this guide: Sony Z series 32bit Vista Clean Install Guide (full functions & no windows activation)
2. Make a back-up image of the harddrive using Storagecrafts shadow protect(http://www.storagecraft.com/products...rotectDesktop/)
3. switch to the new SSD harddrive
4. load my back-up image on the clean new SSD harddrive.
5. and i'm ready to go
Just had a hard drive failure on my VGN-BX195ep lapton, I bought a new hard drive, but when installing one of my recovery discs (application disc) is not recognised.
I have a new Vista Home Premium here unsed, so thought I would try that. It installs fine, but I am really struggling to get the Sony Drivers to make it work.
I am without Wireless Lan, Flash drives and also have ? makrs on device manager on Biometric processor (fingerprint I guess) Mass Storage Controller, and two unknow devices which are listed as Intel 82891FBM LPC INt Controllers.
I have spoken to Sony support who claim the original installed drivers should work, but they they have errors on intall due to wrong operating system.
where I can find drivers?
why the Wireless lan does not work as it seems fine in the device manager? But when turned on, apart from the light on the front it is not working?
I have a Vaio VGN-CS16G/R and why is is that after installing Win7 RTM x64 and installing the necessary drivers, I DON'T see the "adjust brightness slider" on the power options? With my other laptops with the same OS, I can see that slider completely.
Also, I when I install Vaio Launcher which I got from the extracted Sony Notebook Utilities installer, it returns an error of:
" Error Number: 0x80040703
Description: Failed to find DLL function: SnyUtils.SuOpen
Setup will now terminate. "
Are there workarounds on this?
I know that we really don't need to have a million threads on the subject, but I haven't seen many SR tutorials. If this stays open, maybe it will help other older SR owners when they upgrade to Windows 7.
What you need before you do your upgrade:
Firmware Extension parser
Sony Shared Library
Sony Notebook Utilities
Optional items:
Webcam software
Synaptics Touchpad drivers
Fingerprint Scanner driver
I installed Win7 Pro as a clean install. I have a 320gb drive that I formatted and partitioned into 3 parts, 40gb for the OS, 5gb for the pagefile and the rest for a storage partition.
I use the storage drive to put all of my user-created files. That make it easier for me to locate an item and makes backing up my personal files alot easier. I think it also reduces fragmentation on your OS drive...........
I just performed a clean install on my vaio Z until I reached where I install the Battery Check Utility...now I keep getting this message!
"The installed battery may not be properly connected to the computer or may not be compatible with the computer.
Click "OK" to enter Hibernate mode and reinsert the battery!
What the hell is that? I have never removed the battery or done anything to it..the laptop was absolutely normal before the clean install!
My laptop top is not usable now...even though it's on ac power I still get this msg
I just bought a new sony vaio laptop. I wanted to install the newest 9.4 ATI drivers for the gpu. So heres what happened:
- Downloaded newest drivers from ati official site
- Went to the uninstall programs section in control panel, closes thing I could find to ati drivers was "Ati catalyst install manager", so i uninstalled it and it uninstalled ati drivers within the process.
- Then restarted the laptop
- Then installed newest drivers with the catalyst control center.
- Restarted laptop
- After the restart the highest available resolution was 1400x1050, I couldn't find the ati control centre and can find no evidence of the laptop even recognizing the ATI GPU after the restart.
I've gone through this sequence twice now and each time the drivers haven't been updated properly and the same thing has happened.
I've restored the system so now I have the 8.4 drivers on my gpu but I really can't figure out how to update them,
Sony vaio
-2.66GHz core 2 duo
-Ati HD 3650 512mb GDDR3
-4GB DDR2RAM
-Vista 64-bit
-320GB HDD
-1920x1080 Full HD display
I have a Japanese VGN-Z90NS, and after getting it back from Japan for a minor repair, decided to put Vista Ultimate x64 on there to take advantage of my entire amount of memory.
Some may have seen this thread:
Sony Z HD install and 64bit upgrade problems
On at least the older Vaio Z series (the Z90, Z5xx in the USA, etc.), I have confirmed that the EFI thing is an issue if you try to install a slipstreamed SP1. I happen to have a genuine Vista Ultimate x64 install disc that is RTM, and it installed just fine with no EFI issues.
To get the 64-bit original Sony drivers, download them here or here.
Once you download all of the Sony drivers, download Universal extractor from here, and run it against all of the EXEs you downloaded to strip the model check.
To get the Intel 4500 graphics driver, download it here
NOTE: My Z does not have the built-in camera or fingerprint security, so you'll have to figure that out on your own. Somehow my notebook no longer has bluetooth after being fixed (looking into that ...), so that isn't in this list either. I do have one device that I can't find a driver for, and I bet it's bluetooth since everything else is fine. I'll update if I sort it all out.
Install Process that works:
1. Vista x64
2. Vista x64 service pack (if needed)
3. Intel chipset driver - reboot required
4. Intel Matrix Storage Manager (I have the RAIDed SSDs and definitely need this) - reboot required.......................
I tried to do a clean install from windows 7 starter to Windows 7 home premium on my new Sony vaio Vpc-w21z1/l
Everything looks good, i installed all drivers and the software needed to works ok, but the Sony smart network does not work. it wont start at startup, so i go to the c:programs and start from there, it appears the window but i don't have the options to turn on and off the wwan, wireless or bluetooth.
The problem is that even the wireless and bluetooth is installed it can't find networks, and the wwan after i reboot 2 times the computer it disapears. i installed the updated version of smart network 3days old and even that does not work.
DISCLAMER:The Windows 7 Beta is a pre-release version of Windows. While this a stable and high-quality beta,
it's not the finished product. It could crash your computer or cause you to lose important files or information.
BEFORE doing this procedure, backup all your data...
I have been trying to make a clean install of Windows 7 but when I get to the install screen,
it says that "it does not recognize my drive." This happened too when I tried to install windows XP,
and I solved it by slipstreaming the SATA controller drivers but, I don't know where to find those for windows 7, or if that even will solve the same problem
I share with You the steps I've made to install a fresh Win 7 on A Vaio VPCF11Z1E (EU model)
1 Before anything else be sure to make Your recovery disks If You haven't already done them. It's very important to actually do them since we'll need them later. You will use them for a future installation of the bundled utilities You may require.....
if there was a way to do a clean install of Vista (preferably Ultimate 64-bit) on the Vaio Z and have functioning s1/s2 and speed/stamina and Wlan controls. I found the guide for 7, I was wondering if there was something like it for vista, or at least a place where i can get the drivers. My viao Z came with alot of "bloatware", and i'd like to have it snappy.
View 10 Replies View Relatedperforming a clean install of Windows 7 32bit on a Sony Vaio FZ from Windows Vista.
I have searched the forums and have only found guides for performing an upgrade install to 32bit and a clean install to 64bit.
Quote:
UPDATED OCTOBER 27 2009 FOR OFFICIAL WINDOWS 7 RELEASE
will benefit many of you upgrading to Microsoft Windows 7 64-bit RTM. This install was done and tested on a Vaio VGN-FW139E/H.
Hardware
While the VGN-FW line shares many components, many models also differ. So, I will first list the hardware that is on the VGN-FW139E and the install was done on.
Audio: Realtek High Definition
Audio (HDMI): Realtek ATI HDMI Audio
Network: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
Wireless: Atheros AR928X
Touchpad: ALPS Pointing Device
SD Memory Card Reader: Ricoh
MS Memory Card Reader: Ricoh
Modem: Conexant CX11270
Video: ATI Mobility Radeon 3400 Series..................
I have an FW11M which I formatted when I bought it, put on vista ultimate and after a weekend of fiddling, got all of the devices detected with correct drivers installed.
Anyway, now I would like to update the graphics drivers to the new ATI 9.1 catalysts except that every time I try, I run the setup, it appears as though it is working and then says installation complete...
however, it changes nothing. Device manager still reports the old driver version and the catalyst control centre does not run
Bought a VGN-FW26 over the weekend (ATI HD3650, 2.40 Core Duo, 4GB RAM, Vista Home Premium).
On bootup, tried out a few games (mainly Fallout 3, Rainbow Six Las Vegas). Everything was running smooth, especially Rainbow Six at full resolution). This is with all the factory-included bloatware running.
I got annoyed at the bloatware, so performed a semi-clean install of Vista (ie. reformatted comp, reinstalled Vista, cancelled the installation process for the Sony programs ... then manually installed a selected number of programs using the VAIO Recovery Centre. These programs consisted several of the essentials from the programs list, and ALL the drivers).
Now, when I run the for-mentioned games, there's a noticeable increased lag for those games. I have even removed optimised Vista by disabling some unnecessary services, as well as made sure there are no unnecessary background programs running (e.g. McAfee)
In addition, I haven't been able to install the Catalyst Control Center, the VAIO Recovery Center only lets me install the ATI driver (I was thinking perhaps the lag in games is because my graphics card is running in a "maximise batteries" mode?) Is there anyway I can extract the Catalyst Control Center install from the recovery disks/drive?
I have a vaio VGN_AR71M laptop,and recently i managed a fresh install of windows 7 X64 with all drivers including video card 8400m gt.
So i want to put my experince here so everyone can look at this method combined from DrCrank+bogart fron url:
VAIO AR Series, VT and symcmos gone wrong - help!
and
How to Enable Intel VT and AHCI on a Napa/Santa Rosa platform Phoenix BIOS Vaio laptop
so i have done what bogart indicate ,for this vaio type and change in default.txt the followin value
Phoenix BIOS version - R2090J8
BIOS value: (0285) [0000] --------> (0285) [0001]
and after the reboot it worked the vitualization is enabeld and i have downloaded all drivers needed and everything work fine 100% ,and from these pictures it confirm the virtualization:
I was searching for a Thread that has some data about clean instructions and restoring all functions for the VAIO E-Series, but I didn't find one.
And since there is a lot of users here who own the VAIO E-Series, I think it might be useful.
So, can anyone share his experience with a clean install on the VAIO E-Series and how did you do that?
Some special order in installing drivers? What's about the FN-Buttons? Whats about the Assist and WEB Buttons? Are they all working?
I downloaded all win 7 drivers, and I'm ready for a clean install of Windows 7 Ultimate 64b on my Vaio. I wonder whether it would be wise to first install the bios upgrade for Win 7, version R4041M3, before I start the OS installation?
View 3 Replies View Relatedi just reinstalled winxp sp3 on a sony s3xp, i don't have the vaio installation cd but i did a clean reinstall of windows xp and installed essential drivers but it was quite slow, eg seconds to load a directory, or long pauses during web browsing
now i've installed all the original drivers and utilities and am running without power saving but it's still sluggish, eg the mouse pointer jumps about the screen rather than moves continuously when the cpu is under any load at all
THIS IS FOR WINDOWS VISTA 64-BIT ONLY
My system is VGN-AW190.
There are already a couple of "guides" floating around that describe how to install a clean copy of Windows on Sony laptops.
The process is fairly simple and involves installing certain Sony software and drivers in particular order (according to Sony).
For FW series, the guide is here: Official Vaio FW Clean Vista Install Guide
When I first installed Windows Vista Ultimate, I had no problems getting everything to work EXCEPT for the following:
1) CompactFlash (JMicron JMB368 ExpressCard CF) driver is not available on Sony's web site. When inserting the card, it does not show up as a drive in Windows Explorer. After some time playing around, I figured the following 2 ways to make it work:
a. Insert your card, go to device manager and click on "scan for hardware changes"
b. Boot Windows while the card is inserted
2) SD card slot works but is not mapped to any drive. While Ricoh MS driver automatically creates a drive, there is no driver on Sony's web site that would do the same for SD slot.
Sony's support is useless to a point where they told me that the reason why my CF cards do not show up and there is no drive mapped to the slot is because the laptop does not support cards larger than 4GB (and I have only 8GB Sandisk cards) What a joke. I finally managed to get a 2nd tier technical guy on the phone who said that Sony does not provide CF drivers and that there is nothing they can do about it..........