I downloaded all win 7 drivers, and I'm ready for a clean install of Windows 7 Ultimate 64b on my Vaio. I wonder whether it would be wise to first install the bios upgrade for Win 7, version R4041M3, before I start the OS installation?
View 3 Repliesif it is possible to update my Z540C's bios (current version: R2168M3) to R4041M3 without any problems?
My concern is there might be some hardware issues that might compromise the performance of the laptop given the fact that my model is an older one.
I flashed by BIOS with the R4041M3 so I can install the latest NVidia drivers for Windows 7.
I wanted to enable "Advanced" options with the InsydeH20 hack (which requires EFI boot) - and I kept getting those
"Remove disc or other media" messages.
I thought something went wrong with my USB stick, tried at least 5 of them and finally also tried Windows image itself - with no luck!
Then, I switched back to old BIOS - and the EFI boot worked immediately on the first USB drive!
Can the Z11 bios be upgraded with the Z31 bios, if so is there any advantage?
View 3 Replies View RelatedI am not unhappy with Vista.
View 3 Replies View RelatedWhat's the difference between these 2 versions for my Z710DD ?
View 6 Replies View RelatedWith all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
Quote:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
i am having a problem installing windows xp english version on my compaq presario b1011 which is default in german . when i try to install a english version of xp it hangs in xp logo itself . when i try to install a xp english version i am getting this error
"windows xp professional setup
setup was unable to verify c:
your computer may not have enough memory to examine the drives (or) your windows xp CD may contain some corrupt files to continue press enter" this is the error message when i continue to install it installs and after installation it hangs with xp logo . if i try to install with xp german it installs smoothly without error
I have Pavilion dv7-4142eo bought and using in the Sweden. This laptop have Swedish Windows 7 installed. Now I want give this laptop my father which is living in the Poland and speaking Polish language only, so I have to install Windows Polish version. Should I install another drivers? If yes, drivers for Pavilion dv7-4140ew (only this version of dv7-4100 have drivers for laptops designed to Polish market) will be OK? Can I install Windows 8? Generally - what I should do?
View 3 Replies View RelatedI just bought a T7500 processor to upgrade my Aspire 5315. I understand that a bios upgrade should be performed before replacing the cpu. I read about some problems with bios version 1.34 and some went back to 1.33 and there is a new bios 1.43 now.
View 7 Replies View RelatedUpdated: Found a better way to backup Bios only, Please see the end of this message
Let say your Vaio Z is using Bios R4040M3 and you move to Bios R4041M3 to use the official VT support. Later on, you want to move back to R4040M3 to use the Advance Menu hack. Unfortunately, you cannot move back as Sony never publish the R4040M3 Bios update. This is my current situation.
I decided to investigate a way to back up the current Bios. Using a program called Universal extractor, I managed to extracted the files in the original Bios update. The bios update uses a program called Insydeflash to flash the Bios. The Insydeflash uses a file called platform.ini to control its setting.
In the platform.ini file, there is a section called [FDFile]. The section [FDFile] has a parameter called BackupName. If we put in a file name here, the Insydeflash should save your current Bios into that file. Unfortunately, I cannot make it work with the Sony supplied Insydeflash. (version 3.38).
I managed to get the newer version of Insydeflash (version 3.72). The newer version has a new ini section called [BackupROM], as the following:
..........
[BackupROM]
Flag=0
FilePath=c:
FileName=....................
I opened up my Z last night and changed the stock HDD to a new WD Scorpio Black 320gb 7200rpm HDD. Aside from some difficulty with one of the screws already having a stripped head, it was a fairly simple process.
I turned the Z back on and installed Vista Home Premium x64 SP1 from the OEM disc that I bought for my custom-built desktop computer (to clarify, this means it's the official MSDN release of Vista x64 SP1 from March '08, w/ no embedded drivers), using the Vista product key under the bottom of my Z. All was well until the install completed and Vista rebooted... it gave me the blue screen of death. I shut down the Z and turned it back on -- same result. Then I started the Z and jumped into the BIOS immediately, took out the Vista install disc, and started -- this time it didn't blue screen and the Vista install completed and successfully booted to the desktop.
I was tired and went to bed at that point before installing any drivers, but I'm concerned that my install may be corrupted and that I should attempt it again (perhaps ensuring that I remove the install disc immediately upon the reboot?). Could the blue screen be an issue associated with my Vista SP1 disc not having the right SATA drivers for the Z? If that's the case, I may have to try to create a new Vista install disc with the drivers slip-streamed in.
Another odd thing was that, when choosing where to install, Vista saw the only partition on the HDD as "Disk 0 Partition 3." The HDD is brand new -- I remember back to when I installed Vista on my desktop and it saw my hard drive as "Disk 0 Partition 1." There was no missing space, it had the 298.9GB that you'd expect for a 320GB drive.
I am not able to install the Wide Wireless Lan Driver64 in my Lenovo B460 laptop which is running with Win 7 64 bit ultimate version.When i installed the avialable drivers fro lenovo site,it showed No matched driver error showing.
View 4 Replies View Relatedi own an aspire 5672 wmli i`ve done many upgrades to it and always try to have the latest updates for all my drivers but i`m curious i see in the europe site has different bios updates with different dates there is a update wich is the latest on 3239 from 2008 and there is another from 2/23/2007 3236 but under vista now i use vista ultimate should i use the one for vista is there some difference, some integration for vista or something or just go for the latest 3239?
View 6 Replies View RelatedI have inspiron N5110 . I recently upgraded my bios version from A9 to A11(to solve the Win 8 black screen problem) . But unfortunately the battery timing is reduced to 2 hours only . before that it was nearly 4 hours. I switched back to windows 7 and i want to get that bios version back..
View 3 Replies View RelatedI have a Dell Inspiron 6400 laptop and it is currently running with the A12 BIOS version.
I notice that there are several newer versions available... A14, A15 & A17
Since the details of the A14 version indicate that it includes an "Intel CPU microcode update", must I FIRST UPGRADE with this A14 version before I THEN upgrade with the latest A17 version, or by simply upgrading directly with the A17 version, will this also include all previous updates, including the Intel CPU microcode update...
I am using n5050 model from last 2 years, now i increased memory to 8GB and also changed intel celeron to core i3 processor, now when i plug in AC adaptor my screen goes to blank for just 2 seconds, a technician said you update bios, i downloaded, but it says " same version can't be flashed " .... I am using A05 version of Bios....
View 3 Replies View RelatedWhat is going on with updating the Bios with Dell laptops? I have a Dell M4500 precision laptop. I'm running Windows 7 pro 64 bit an I7 quad processor and 8 gigs of memory. I can't update the bios past V 07. When I looked through the support  posts I found people asking the same question and when I did a search I found over 300.000 hits for the same problem many Dell laptops.  What I have NOT found is Dell addressing the problem.  Is it the update engine it's self or a problem with the computers?  I installed all the patches and all the updates for my computer except the Bios.Â
View 15 Replies View RelatedI'm thinking about purchasing windows 7, do i need a clean install of windows vista to upgrade? and also do i need to get all the drivers ect like in the clean install of vista if i wish to upgrade? i have a vaio vgn-fw21L
View 3 Replies View Relatedjust like my sony laptop FW510f, it have the ATI 4650, but the GPU frequency is 450 and memory is 600. i think dell can do like it to avoid the fan's noisy(its runs when i press the start button), and the throttling problem.
BTW: my 1647's fan keep spin and the gpu temp is 50 when its idle, is it normal? the ambient no more than 20c
If you navigate to the drivers' download page for Inspiron 7520, you will notice under "BIOS" that there is a version A11 (released date: October 15, 2012) available for download.However, the small print says "Applies to: Dell Vostro 3560 system BIOS". Is it safe to flash my current BIOS version A04 to A11 for my Inspiron 7520? If not, why is that item listed in the first place?
View 15 Replies View RelatedI purchased a Latitude D505 from a police auction and the BIOS setup is locked by password. It will not allow me change setups, such as system time.
Under system security it shows Primary Password unabled, Admin Password Enabled, Configure Setup Disabled and Configure Password enabled.
I need to clear these in order to setup new HDD and operating system.
If needed the present sys number is #6M81L51-595B
How can disable my internal HDD from Bios version A08 of Inspiron 5423? I cannot find this option in the Bios. I'm trying to boot from an external usb HDD but it fails because of the OS installed in the internal HDD.
How I can disable the internal HDD without having to physically open the laptop?
Recently, my HDD and DVD drive went-off together and Dell replaced the parts.
Since new HDD has been placed, support team installed Windows 7 Home Premium and I had a excellent booting time of 20 seconds (total boot time, BIOS A07, no mSATA).
While upgrading Dell drivers for bluetooth,prompted for BIOS update and upgraded it now.
After upgrading my BIOS to A09, now my BIOS boot time itself 19 seconds, and windows boot time is 23 seconds.
Why previously good performance went down after upgrading BIOS...
I just got my new Sony Vaio SR. I'm going to burn the recovery discs, and then wipe the entire hard drive clean and get rid of all the partitions and install Windows 2000 and Windows XP. But neither Win2k nor WinXP setup will run for some reason
View 4 Replies View RelatedI tried looking around the forum and couldn't find anything.
I'm having a hard time installing Windows 7 x64 on Vaio TT.
It says "On EFI systems, Windows can only be installed to GPT disks."
My problem is that I bought a VAIO laptop (VGN-FW31M) and it came with windows vista. So I formated it and installed Windows XP PRO SP·3.
(I had the common SATA driver problem but I managed to solve it).
The problem comes when I try to install any driver, even the CHIPSET driver.
I get a message saying:
"This computer does not meet the minimum requirements for installing this software. Setup will exit"
I got all the drivers from the sony official site.
I already installed win 7 x64 on my laptop, but webcam and special key with Fn still don't work. Someone can provide me these suitable softwares?. I also found them on sony's page but they are only used for win vista.
View 6 Replies View Relatedif this is possible ?
View 3 Replies View Relatedfamily member install some additional memory in her Sony VAIO laptop, but seem to be having a problem. Its a VGN-C290 model (May 2007) and currently has one 1GB chip installed & has one open slot. It allows a max of 2GB.
Now, I have purchased an additional 1GB chip from Crucial.com, but after installing it in the one open slot, it appears that it is not recognizing it at all. The laptop will turn on, but doesn't get to the XP screen. Not even the Sony VAIO/Phoenix welcome screen either.
I have never had a problem with Crucial memory, but I contacted them directly to maybe help with this problem. They basically told me to make sure it is really seated in there good and apply a lot of pressure. They also had me put the Crucial memory in the slot #1 where the original Sony memory was. Neither worked.
The only other thing they suggested was that it was a BIOS related issue & to somehow update the BIOS. I checked & it currently is running BIOS version #R0080J4. I'm trying to determine if this is the latest version. If not, then how to update it.