Sony :: Vaio VGN-BX195ep Vista Install
Sep 4, 2009
Just had a hard drive failure on my VGN-BX195ep lapton, I bought a new hard drive, but when installing one of my recovery discs (application disc) is not recognised.
I have a new Vista Home Premium here unsed, so thought I would try that. It installs fine, but I am really struggling to get the Sony Drivers to make it work.
I am without Wireless Lan, Flash drives and also have ? makrs on device manager on Biometric processor (fingerprint I guess) Mass Storage Controller, and two unknow devices which are listed as Intel 82891FBM LPC INt Controllers.
I have spoken to Sony support who claim the original installed drivers should work, but they they have errors on intall due to wrong operating system.
where I can find drivers?
why the Wireless lan does not work as it seems fine in the device manager? But when turned on, apart from the light on the front it is not working?
View 3 Replies
ADVERTISEMENT
Mar 16, 2009
I have a Japanese VGN-Z90NS, and after getting it back from Japan for a minor repair, decided to put Vista Ultimate x64 on there to take advantage of my entire amount of memory.
Some may have seen this thread:
Sony Z HD install and 64bit upgrade problems
On at least the older Vaio Z series (the Z90, Z5xx in the USA, etc.), I have confirmed that the EFI thing is an issue if you try to install a slipstreamed SP1. I happen to have a genuine Vista Ultimate x64 install disc that is RTM, and it installed just fine with no EFI issues.
To get the 64-bit original Sony drivers, download them here or here.
Once you download all of the Sony drivers, download Universal extractor from here, and run it against all of the EXEs you downloaded to strip the model check.
To get the Intel 4500 graphics driver, download it here
NOTE: My Z does not have the built-in camera or fingerprint security, so you'll have to figure that out on your own. Somehow my notebook no longer has bluetooth after being fixed (looking into that ...), so that isn't in this list either. I do have one device that I can't find a driver for, and I bet it's bluetooth since everything else is fine. I'll update if I sort it all out.
Install Process that works:
1. Vista x64
2. Vista x64 service pack (if needed)
3. Intel chipset driver - reboot required
4. Intel Matrix Storage Manager (I have the RAIDed SSDs and definitely need this) - reboot required.......................
View 3 Replies
View Related
Jul 17, 2009
if there was a way to do a clean install of Vista (preferably Ultimate 64-bit) on the Vaio Z and have functioning s1/s2 and speed/stamina and Wlan controls. I found the guide for 7, I was wondering if there was something like it for vista, or at least a place where i can get the drivers. My viao Z came with alot of "bloatware", and i'd like to have it snappy.
View 10 Replies
View Related
Jan 17, 2009
THIS IS FOR WINDOWS VISTA 64-BIT ONLY
My system is VGN-AW190.
There are already a couple of "guides" floating around that describe how to install a clean copy of Windows on Sony laptops.
The process is fairly simple and involves installing certain Sony software and drivers in particular order (according to Sony).
For FW series, the guide is here: Official Vaio FW Clean Vista Install Guide
When I first installed Windows Vista Ultimate, I had no problems getting everything to work EXCEPT for the following:
1) CompactFlash (JMicron JMB368 ExpressCard CF) driver is not available on Sony's web site. When inserting the card, it does not show up as a drive in Windows Explorer. After some time playing around, I figured the following 2 ways to make it work:
a. Insert your card, go to device manager and click on "scan for hardware changes"
b. Boot Windows while the card is inserted
2) SD card slot works but is not mapped to any drive. While Ricoh MS driver automatically creates a drive, there is no driver on Sony's web site that would do the same for SD slot.
Sony's support is useless to a point where they told me that the reason why my CF cards do not show up and there is no drive mapped to the slot is because the laptop does not support cards larger than 4GB (and I have only 8GB Sandisk cards) What a joke. I finally managed to get a 2nd tier technical guy on the phone who said that Sony does not provide CF drivers and that there is nothing they can do about it..........
View 10 Replies
View Related
Jul 23, 2009
My new FW490 came installed with Windows Vista 64 Home Premium SP1. I've read that Verson SP2 is available from Microsoft, but it does not appear in Windows update or on the Sony Download site. Has anyone upgraded to this version on the FW490?
View 10 Replies
View Related
Oct 24, 2009
I'm thinking about purchasing windows 7, do i need a clean install of windows vista to upgrade? and also do i need to get all the drivers ect like in the clean install of vista if i wish to upgrade? i have a vaio vgn-fw21L
View 3 Replies
View Related
May 11, 2009
anyone know where I can find vista drivers for my sony vaio tz91?
(The recovery partition no longer exists and i don't have dvd's of drivers due to it being a 2nd hand machine
View 3 Replies
View Related
Feb 18, 2009
i've just downgraded my vaio z11wn/b to XP because i really don't like vista...
View 3 Replies
View Related
Jan 14, 2009
I have a SONY VAIO VGN-CR140E with intel core2 duo CPU T7100 1.8Ghz (which is 64 bit capable)
It came with 2 gig RAM,i recently upgraded to 4 .
I knew 32 bit Vista won't use all 4 gig ,but what i did not know was that if i go with 64 bit Vista i'm not gonna have the drivers i need..
View 10 Replies
View Related
Jul 1, 2009
I'm a computer programmer and im having problems installing vista on a sony vaio. (to install XP i have to slipstream drivers into the isntallion which takes too long to do)
so i want to reinstall vista at this point for now my last install of vista somehow got screwed up oneday i booted up and it was missing windows files so i formatted it burned a vista install cd everything boots fine the install screen come up ....
View 4 Replies
View Related
Jul 6, 2009
anyone know here i can download the vista drivers for this notebook.
View 5 Replies
View Related
Jun 11, 2009
I keep getting a message stating that any updates for my drivers on a VGN - C25G are not intended for use with my model (all details are correct). So, I need to resort to the universal extractor to get my FN keys, Camera and Bluetooth working on this vaio...
I have never used the universal extractor before, and am uncertain where i would need to place the extracted files once the UE has finished
View 4 Replies
View Related
Apr 18, 2009
Could someone help, when i press f8 at boot, it doesnt have the option to reinstall OS.
View 3 Replies
View Related
Feb 22, 2009
I want to have new installation of windows vista. please help me to fix it, because its getting too slow
provide me information to re-install windows vista on my SONY VIAO CR220E
View 6 Replies
View Related
Apr 28, 2009
I've my VAIO SR290NTB, it came with vista business preinstalled only without the XP downgrade disk. I can order the CD from their web site. but i'm wondering if i ordered the disk does it mean i don't have the license to use vista again. or i will have both windows versions licensed.
View 3 Replies
View Related
Mar 18, 2009
finding drivers (Vista 64 bit) for my Sony VAIO VGN-SZ483N. I have the original Vista x86 drivers, but as expected most of them does not like to be installed on a Vista x64 O/S.
Is there a site that someone could recommend please, or has someone with an SZ4xx attempted this "upgrade" and is willing to share his/her experiences.
I have tested my gaming machine with x64 against x86 (both Vista) and could say with reasonable confidence that the x64 installation outperforms the x86 installation without a doubt. It would really be good to change the O/S to x64 from the OEM x86.
View 6 Replies
View Related
Jan 19, 2009
Sony Vaio vgn-ns10l
I try to boot from cd via the xp disc but receive a blue screen of death after 20 seconds or so. I guess the hard drive is locked and needs formating etc. can vista be replaced ok? do i need to worrie about chipset, and is there drivers for the sata HDD on xp for this machine?. any information on how to replace vista with xp?
View 7 Replies
View Related
Dec 15, 2009
I just got my new Sony Vaio SR. I'm going to burn the recovery discs, and then wipe the entire hard drive clean and get rid of all the partitions and install Windows 2000 and Windows XP. But neither Win2k nor WinXP setup will run for some reason
View 4 Replies
View Related
Jan 9, 2010
I tried looking around the forum and couldn't find anything.
I'm having a hard time installing Windows 7 x64 on Vaio TT.
It says "On EFI systems, Windows can only be installed to GPT disks."
View 6 Replies
View Related
Aug 21, 2009
My problem is that I bought a VAIO laptop (VGN-FW31M) and it came with windows vista. So I formated it and installed Windows XP PRO SP·3.
(I had the common SATA driver problem but I managed to solve it).
The problem comes when I try to install any driver, even the CHIPSET driver.
I get a message saying:
"This computer does not meet the minimum requirements for installing this software. Setup will exit"
I got all the drivers from the sony official site.
View 3 Replies
View Related
Sep 24, 2009
I already installed win 7 x64 on my laptop, but webcam and special key with Fn still don't work. Someone can provide me these suitable softwares?. I also found them on sony's page but they are only used for win vista.
View 6 Replies
View Related
Dec 26, 2009
if this is possible ?
View 3 Replies
View Related
Jan 12, 2009
family member install some additional memory in her Sony VAIO laptop, but seem to be having a problem. Its a VGN-C290 model (May 2007) and currently has one 1GB chip installed & has one open slot. It allows a max of 2GB.
Now, I have purchased an additional 1GB chip from Crucial.com, but after installing it in the one open slot, it appears that it is not recognizing it at all. The laptop will turn on, but doesn't get to the XP screen. Not even the Sony VAIO/Phoenix welcome screen either.
I have never had a problem with Crucial memory, but I contacted them directly to maybe help with this problem. They basically told me to make sure it is really seated in there good and apply a lot of pressure. They also had me put the Crucial memory in the slot #1 where the original Sony memory was. Neither worked.
The only other thing they suggested was that it was a BIOS related issue & to somehow update the BIOS. I checked & it currently is running BIOS version #R0080J4. I'm trying to determine if this is the latest version. If not, then how to update it.
View 6 Replies
View Related
Mar 13, 2009
Let me first start by asking your forgiveness if I have stuffed this quick little guide in the wrong spot. I spent a rather brief 10 minutes searching this forum, and I don't believe I am repeating a write-up someone has already done that follows this simple method. If I am incorrect, I ask a moderator to please place this post in its proper home. As you can see, I am not an avid poster here, and I really don't want to be slammed for not searching with enough gusto, etc.
Alright, on to the quick 'n easy...
I have a new VGN-AW235J, so proceed with courage and fortitude if our letters don't match. I found this as I was trying various ways to cleanse this beautiful machine of it's bloatware. It worked for me, and that is all I will claim.
This method requires that you create the restore DVDs.
If you don't have a handful of restore DVDs, go do that now and come back...and while you're up, bring a snack.
One more disclaimer: I didn't take the greatest notes while doing this, so my instructions may be sufficiently vague to cause minor trepidation on the part of the reader. With that being said, each step should be fairly obvious while in front of your machine...DVDs in hand..........................
View 4 Replies
View Related
Mar 13, 2009
How To Re-install My Sony Vaio Laptop I Tried To Restore But Is Not Possible Secondly Is It Possible To Change The Language From Spainish To English
View 3 Replies
View Related
Jul 25, 2009
I now own a Sony Vaio AW31 S/B notebook with full HD display (double lamp but non-LED).
Quite impressive machine, but I have one problem: In windows and IE8, the colours look a bit too "punchy" and contrasty for my taste.
I found that there's an ICC profile included for the display which by default is applied in the Windows colour management. When I watch my photos in the Vista photo gallery, the profile seems to be applied correctly, as the photos look very good and natural, but when I use a photo for example as a desktop wallpaper, it looks much more contrasty and not so natural anymore.
Vista itself also looks quite contrasty, and also many websites in IE8.
I already tried to turn off the colour management in the Vaio control center and find proper settings in the GPU driver (as I did with all my previous laptops without colour profiles) but didn't succeed in finding a natural setting.
So my questions:
How do you overcome this "problem"? Anyone maybe found good screen settings without colour management (which doesn't make so much sense if you don't calibrate your screen by yourself)? Or did you get used to the punchy look of Windows?
Is there any way to make Vista use the colour profile also for its user interface?
View 10 Replies
View Related
May 24, 2009
could not find the x64 driver for vcc5 cam. Can anyone point me to it ? This is a major dealbreaker for me to upgrade to 64 bit.
View 10 Replies
View Related
Feb 8, 2009
I had got a VAIO NS15G a few days back with Vista Home Premium pre-installed.
I have just upgraded to Vista Ultimate. But after installing the FN Keys for volume and Brightness are not working.
After installing some software from VAIO website, it was under support downloads, dont remember the name, the Volume key is working perfectly (fn+F3 and F4)
But brightness is not working. It shows the brightness metre on pressing the keys but doesnt change or adjut the brightness.
View 9 Replies
View Related
May 19, 2009
This is specifically occurring on Z590, but may be there in all Z's.
If you have a USB mouse plugged in, and you go to sleep mode, and then disconnect the USB mouse, then when the laptop wakes up again, the trackpad does not work. If you plug-in the mouse at this point, the mouse works fine, but the trackpad is still entirely disabled. Vaio Control Center indicates the trackpad is still enabled, but no response at all from trackpad.
If you unplug the mouse, go to sleep, and wake up, the trackpad now works fine.
I am not sure when this bug was introduced, but can anyone replicate it as well? The trackpad seems to get disabled upon wakeup from sleep if the USB mouse was unplugged AFTER going into sleep mode.
View 4 Replies
View Related
Sep 13, 2009
I brought two days ago my sony vaio SR with russian vista business OS. I need to change it to english. Please help me how to do it.
View 3 Replies
View Related
