I noticed that there were new updates so I went ahead and installed them. On restart, the gray screen came up and just sat there. I shut down and started up a few times and same thing. I restarted and held the option key down and it gave me the OS menu and I'm able to boot Mac OSX from there.
I'm going to try to set the default OS using Boot Camp to see if that fixes the problem.
Where is Boot from USB option in UEFI boot device list in Inspiron 17r SE?
Mine only shows Network in UEFI boot list?
I am experiencing a problem in wireless. I can't access my lenovo g50 -70 bluetooth ,wifi in boot (live cd) and in virtual machine.
View 2 Replies View RelatedI have a dell Inspiron 15r 3537 i7 model with windows 8. I bought it 4 months ago. I was playing a game on it and it suddenly hanged. I waited for 5-10 minutes and tried to close the game but it wasn't closing and it was hung. I waited for atleast 15 minutes and I had no choice so I switched it off from the power button thinking that it will turn on normally. But when I switched it on it showed the dell logo and then it said
Checking media
Checking media [fail]
Checking media [fail]
No boot device found. Press any key to reboot the machine.
When I rebooted the machine, the same error came.
I have XP on my macbook pro via bootcamp/vmware. I tried putting 7 on it, but then XP stopped working. So I deleted the partition that 7 was installed on and XP worked again.
Is there a way I can have both XP and 7 working via bootcamp? As far as I know I can't, so I was thinking about running 7 with bootcamp and XP via vmware. Also ever since deleting the partition that 7 was installed on XP doesn't seem to be able to boot via vmware. It was says I have to remove the physical disk from the virtual machine then add it again. How do I do this?
I bought a recent Inspiron 7720 laptop, with Win8 pre-installed. It seemed to be installing some updates, when it shut down(with them having installed only 35%). When I attempt to power on, it passed the Dell logo screen, then sticks FOREVER (doesnt load the w8OS apparently). I tried the battery out-in trick - doesn't work.
If I press F2, it guides me to BIOS (Phoenix A10) Disabling secure boot and starting Legacy mode has NO IMPACT WHATSOEVER, exactly the smae startup issues but without the "F12 Boot Option)
If I press F12 during logo screen, it takes me to "F12 Boot Options", which is a black screen with an empty progress bar in the middle(apparently this should have the option to run a PSA diagnostic but it DOESNT SHOW ANYTHING!)....
I just accepted an offer on my MBP and I'll be purchasing a new unibody MBP in the following week.
I have a lot of personal data and applications that are backed up right now in the form of a Time Machine backup.
The old MBP is a SR (sig below) and the new one will be the unibody; different specs, GPU, HD etc...
Can I just plug in my external HD that has my Time Machine backup into the new machine and restore it? Would the fact that there are different hardware complicate matters? And if so, since I still have my old machine for now, what would be the best solution to do what I'm trying to do here?
I have two laptops. One is a macbook and the other is a Toshiba that has Vista. The Toshiba works pretty well, but I want to be able to back it up like I can with the mac and time machine.
Is there any Windows software out there that can come close? I know there is backup software that comes with some external hard drives, but I think they just save your files and not your settings.
I have no usb boot option and i cant seem to enable it no matter what i change.
Also the laptop has Linux on it that i cant seem to boot either,all i get after the format that i did at the partition that had windows is a syslinux blackscreen.
Let me note that i had the usb option pre-bios update.I updated bios because i could not install wifi and bluetooth drivers.
I upgraded to Windows 7 today on my Fusion Virtual Machine on my Macbook today. I preceded it with a Time Machine backup, and it copied a few gigabytes, which I expected since I installed CS4 the other day.
Two hours later...
I installed the Windows 7 upgrade, and then did another Time Machine backup. This time it copied 36 gigabytes (the amount of my virtual machine file).
This got me thinking... Does Time Machine backup the entire virtual machine file each time there is a slight change? If so, then merely launching Windows in Fusion would be enough for Time Machine to backup the virtual machine file, using almost 40 gig on my backup drive most every time I launch time machine backup, even though the change is minor (a few bytes)
The consequence is that for a Fusion user, the backup device is going to fill awfully fast because of the relatively minor changes to the VM file, thus making for paltry space for history on all the Mac files.
I figure that a 320 Gig backup device is effectively extremely tiny for a 250 Gig HDD with only 90 Gig of files. My backup drive is already full after only ~8 backup sessions, hence deleting old history, which is hardly a few months old!
I use my boot camp partition in Vmware. How do I make a bootable copy of that? I want to know because in Boot camp I'm gonna install Windows 7, but I might still need XP so I was thinking about using Vmware for that.
View 7 Replies View RelatedWhich folder can I delete to conserve disk space? I only need one back up. Also how iomega in general? Is GTECH worth the extra money? What about this one: [url] Thats two 1tb drives mirrored right?
View 4 Replies View RelatedJust started TM backups on a new 1TB drive today....
It did 30GB in 2 & half hours! A little slow...
Why does it go soooo slow? Supposed to be faster in SL.... don't think so....
Went for Carbon Copy Cloner..... much better.... currently 27GB in 23 mins.... thats more like it.
That'll be my weekend moan out of the way I guess...
I was given a nice E6510 that doesn't boot. I've taken it apart and tested the memory, all the connections, reseated the processor (yes I used arctic silver) and it never gets past the 'one time boot menu', the diagnostic boot freezes but I CAN get to the very complex BIOS version A16.
So, I bought a new MOBO thinking that would solve the boot issue but it hasn't-it's doing exactly the same thing. may indicate the problem-Dell calls this an "OPTION ROM", may be 'unseated' or the system board is bad.
What is "Option ROM" and how can it be reseated? Are there any other things I can do in BIOS to change this? I also replaced the SATA CDROM and the hard drive, and I know the USB port works okay but nothing will boot from them.
My laptop is hp pavilion sleek book 14 and i have installed ubuntu as second operating system and when it starts the start up option is not displaying....
View 1 Replies View RelatedHere is the thing, I only have used 285gb of 500gb on my internal hard drive. I got myself a new 500Gb external hd as a time machine.
However, when I go to the time machine' options it says: Total included: 503.1gb
How can a backup be bigger than my internal hd?
I dont have my Time Capsule just yet, and am looking to set up Time Machine to an external USB HDD.
If I dont have the external drive plugged in, does it just skip the scheduled backup its missed?
Can I just create the initial full backup, then stop the scheduled backups - so only have it incrementally backup when I manually run it?
Will that allow me to just copy it onto a new computer if I get one?
View 6 Replies View RelatedIf I want to replace my HD in my MBP, and I use time machine to backup my hard drive.
I don't want to lose any content or reformat, so I think time machine would be my best bet.
The thing is, I have a lot of purchased music/movies from itunes. Would time machine preserve the authorizations etc..to play this stuff on the new hard drive?
I have a 4 month old MB 13" with Leopard.
Say I upgrade to Snow Leopard on Friday......
If I have a subsequent failure, or just want to upgrade my HDD that then requires me to restore my drive from scratch (with a good recent Time Machine backup avaialble), what process would I follow?
1) Install Leopard from my original disk, then upgrade to Snow Leopard, then use the time machine backup to restore?
-or-
2) Install Snow Leopard straight from the upgrade disk (if it even possible), then use the Time machine backup to restore?
I guess I am asking whether the "Upgrade Disk" a full install disk, or is it just for an incremental upgrade?. Do I even need my old Leopard disk anymore?
I have an Inspiron 15R Model 5010-3228
Windows could not start because the following file is missing or corrupt: windowssystem32configsystem
I was able to run diags from F12 at startup - everything seemed to pass but it ended with a message indicating there was no recovery partition.
I have no original media to reinstall.
The laptop was a gift from my father-in-law in Poland. As a result Dell would not provide service. Warranty is now expired.
Will there be any Macbook pro updates anytime soon? Im thinking about getting a 13in. Macbook pro, but if there will be updates in a couple months, ill rather wait then buy one now.
View 5 Replies View RelatedUsing a mid-2009 MBP -- have grown to really like this notebook. Given that it gets carried around often, I'd like to have everything on it protected by something more than just a simple login password.
I use Time Machine in conjunction with a Time Capsule to keep things backed up, but my understanding is that if I were to enable FileVault to encrypt the disk, I would have to log out of my user account for any backup to actually run. This is pretty inconvenient and a ridiculous issue in general.
What are my other options, folks? Should I just look into using TrueCrypt? (ETA: apparently TrueCrypt doesn't play nice with Time Machine either...)
Does time machine function as a complete backup solution?
Does it backup every file?
my expensive massive desktop replacement PC recently died after only 16 months - and I was sick of lugging this monster around.
I'm a software consultant - so I need to be able to run both MS .NET environments, and J2EE depending where I'm working.
Having never really looked at the Mac OS X, before - I thought what the hell, after being thoroughly enthralled by the build quality and price of the new 13" pro. It was a nice contrast from the 7kg beast I was lugging about before.
Well! What an eye opening revelation, seconds after opening my first bash shell and realizing the whole damn thing is sitting on top of Unix.
No need for linux as I was intending. I setup bootcamp but haven't needed to use it yet - for now being able to use a VM - but it's nice to know it's there if need be.
I'm completely recommending this to any Unix or Linux developers out there.
The more I dig, the more I find various Mac OSX binary builds of my favorite Linux packages.
My only minor complaint is I find Finder a little quirky in it's behavior, but no worse than half a dozen X windows file managers.
So I bought Acer E5-527G-77BU. I installed windows 8.1 Pro with no problem. But I really don't like this windows and I want to install Windows 7. But when I plug in DVD or flash drive with windows, I don't get the boot option for it (in the f12 boot menu). If I put in the Win 8.1 DVD everything is fine. I can chose it from the menu.
View 3 Replies View RelatedI just installed a clean copy of Snow Leopard but now I don't have permission to access my Time Machine backups, the drive itself shows all the dates of the backups like this:[url]
But say when I try to open any given folders inside the backup it says I don't have permission to do so: [url]
When I enter Time Machine it shows the folders as empty with the red no access icon on desired folders.
My understanding is that FileVault's shortcomings are such:
- Documented vulnerabilities
- Requires that user be logged off to backup with Time Machine
I have a few things on my notebook that I would like to be kept safe in the event of a loss or theft. I used to use AxCrypt on Windows for this, but there are no OSX builds for it, so what I'm wondering is this:
- If I create an encrypted image and use it like a TrueCrypt/Cryptainer partition, will Time Machine back the image up as it changes over time like any other file?
- Is there any reason I shouldn't do that over some other way of keeping things safe?
Even though the desktop refresh took quite awhile, it is to my understanding that you can expect a refresh with Macbooks and MBP's every 6 to 8 months, which should put the refresh sometime between 8 days from now (unlikely) to 2 months and 8 days from now.
Is that a likely assumption, or am I missing something here. And yes, I am well aware of the CPU speed bump in the top two MBP's, what I am talking about is an all around refresh, with exception to body structure obviously.
Considering my interests for a new Aluminum 13in macbook.. i was wondering if anyone knew or heard of upcoming updates, revisions or fixes to the 13in macbook. Perhaps apple will make some revisions to the screen, or other issues that may be on the current aluminum macbook. Should i get it now, or wait until some future upgrades or price drops?
View 10 Replies View Related