Dell :: 6800 Ultra Cooling Assembly
Oct 8, 2008
I'm in the processes of cleaning out my XPS Gen2 for the first time since 2005 (yes yes I know...) because it started shutting down during some games. The question I have is related to the heat pads on the video card memory, FETs, and on the chipset heatsink. I know these things suck. I want to use AS5 in place of them but there is a gap between the heatsinks and the memory/chipset/fets when you remove them. How have you guys gotten around this? Is there a better version of a heat pad and where would I get them?
View 9 Replies
ADVERTISEMENT
Jul 17, 2007
I currently own a XPS Gen2 I purchased in Oct 2005. When I was deployed back to Iraq this past year it started acting up and now when I boot it the screen is just black. I have been told by a few people that it is the Vid card that has died on me. If so. Is there any modding to put a 7800gtx in it? I have seen on the forums where I can purchase one for around $260US.
View 14 Replies
View Related
Aug 27, 2007
I'm getting with my rig with everything turned on LOW at native res (1440 x 900). I am using the recommended 163.44 drivers. This is garbage, isn't there anything I can do to make it better?
View 15 Replies
View Related
May 29, 2009
I am in a bt of quandry, my Dell XPS 1710 switches itself off after 5 min automatically; I know its not the dust cause I have just opened and cleaned the heatsinks yesterday; the only other thing I can think of is the thermal compund on the cpu might have dried!
A bit on the problem then for your suggestions; after about 5 min - max my laptop switches off automatically!
sometimes the system leds stay on while the monitor goes lank and systems looks like it has powered off; while at other times even the system leds and the toucpad leds goes off along with the system!
View 7 Replies
View Related
Feb 19, 2009
I have an XPS Gen 2 that I bought back in 2005.
What, if anything, is needed to be done in order to upgrade my system from having a 6800 Ultra card to a 7800 GTX card? Do I need to purchase any additional parts?
View 14 Replies
View Related
Jun 8, 2009
A couple weeks ago I put my laptop (a Dell XPS M170) beside my bed cause I had to use the MC Alarm to get up cause I had to be up at like 4 AM and I don't do well with the beep beep alarms.
Anyway, I plugged it in and sat it on the floor on top of (for lack of anything better) two Arizona tallboy cans laid longways (the feet sat on these) with a chess set box underneath (in case
it happened to slip off one of the cans). I also left the screen partway up. Well of course I left it on overnight for the alarm, but when I got up to go to the bathroom ...
View 5 Replies
View Related
Dec 14, 2007
I have been looking into upgrading my 9300 from the 6800 to the 6800 Ultra for the past couple of years now. The prices are finally reasonable enough to do the swap. My question is would the swap even be worth it these days? Is it still a good enough card to make it worth my while to come up from the standard 6800 even with overclocking it?
View 15 Replies
View Related
Feb 21, 2008
For whatever reason, my 6800 Ultra in my XPS Gen2 I got awhile ago went dead. Can anyone suggest where I can get a replacement on the cheap(er)? I bought the 6800 Ultra upgrade for $500 back then and now spare parts wants $599 for one.
View 10 Replies
View Related
Mar 10, 2009
Dell say to remove battery which I did. Then to loosen the M2.5 x 5 mm captured screw (what is that?) Is that the thing that is on right side and is in the "cutout" of the media bay and ejects when
pushed (not the media bay).
When upside I see a hole on the right side and about half way up. And the last step is to slide the cover away (I am assuming that
I remove 5 screws on the cover itself (the 4 on the left and one in the center).
View 6 Replies
View Related
Sep 30, 2014
I have a Probook 4730s with Windows 7. I continue to get the following error after the computer starts up -
hpConnectionManager.exe
Cannot load assembly:
System.Data.SQLite, Version=1.0.61.0, Culture=neutral,
PublicKeyTolken=db937bcd44ff139
The application will now exit.
It does not appear to have a negative impact but it is annoying get this at each start up.
View 2 Replies
View Related
Dec 31, 2007
regarding the Orange Box performance (mainly Portal) and the 6800 Go. I have a lower fps than I expected to have after playing HL2. But I realized that if I put AA up to 4x in the game, I get better performance than with just 2x (about 6-8 fps improvement). Thats at running at 1280x800 resolution.
I"m using just the Dell 84.30 drivers right now because I can't seem to find a good set of drivers. The others I used were the MobileForce 169.04's, but I wasn't getting a very good FPS. I think my laptop should handle Portal at 1280x800 at around a consistent 30+ fps (with V-sync and triple buffering, no HDR, Medium on every setting with medium, high on the other options). I could be wrong though, I seemed to have run HL2 pretty good at higher settings.
So yeah I'm just curious if anybody else that has a 6800 Go has any recommendations for drivers and why I'm getting better performance with more AA enabled right now. My specs (a bit older laptop):
Pentium M 1.6 Ghz
2 GB of RAM
NVIDIA Geforce Go 6800
Windows XP SP2
View 12 Replies
View Related
Jul 15, 2007
It's been a long time since i've posted on this forum, but i was wondering wether or not a 6800 go is better than the 8600m gt? The reason for this is that my 9300 seems to be on its last legs (after three keyboard replacements, two motherboard replacements, a 3d card replacement, and various other little problems) and i was wondering if they replace my 9300 with a 1720, would i be satisfied? (im already worried about it not having a DVI port as i regularly connect my 9300 to my 20' monitor).
View 15 Replies
View Related
Apr 18, 2008
turn on the power and for the first couple boots, I could see the POST info, but it was really distorted. Now the backlight comes on and I get nothing. I can hear the machine booting, and everything else seems fine, but no display.
I pulled the display off another laptop and it looks exactly the same, so I'm assuming it's the 6800, but I don't have any way to test for sure.
Now... if it IS the vid card, I'm not sure I want to shell-out $200 - $350 for a new vid card. The rest of the lappy works fine (in fact, I JUST upgraded the CPU). Think I could get any money for it?
Also, would would be a good replacement for around $700? I'd like the something with the WUXGA screen like I have now and at least something comparable to the 6800 I have now as well.
View 14 Replies
View Related
Jul 23, 2007
I've got a Dell Inspiron 9300. Recently, I flashed my vBios and had to do a blind flash. I've got a flash drive with all of the things needed on it, but I'm not so sure about the ROM. It was the only one I could find on the net, and it hasn't worked so far. I left the flash drive in for almost two hours, and it finally did the two beeps. It was on full auto mode and it didn't restart; it just sat there.
I guess I'm begging someone to send me a default bios for a Dell i9300's go 6800 gpu (NV41, according to dell, not sure if it matters).
Also, for clarification, the "backlight" refers to the monitor emitting a glow while still being blank, yes? Because as it is, the monitor doesn't even come on, much less emit any light.
View 11 Replies
View Related
Oct 13, 2009
Laptop started with verticle lines. Did some research, seems common video card problems - scoured the net for cheapest replacement (dell wanted crazy money!)
Found ebay seller who links to this forum (did not purchase).
Seems the link is for 9300's...read about flashing BIOS to make laptop think its an XPS...
But, MINE is.
DO i need both the battery and power supply? battery died a year ago and i just took it out. Laptop is desktop. Prefer not to buy Battery .....
View 11 Replies
View Related
Dec 27, 2009
i have Dell Inspiron 9300 With Nvidia Graphics card
I recently installed Windows 7 Ultimate
From Device Manager:
NVIDIA GeForce Go 6800
Driver Provider: NVIDIA
Driver Date : 3/6/2009
Driver Version : 7.15.11.7967
Digital Signer: Microsoft Windows Hardware Compatibility
On scanning from Nvidia website:
Product : NVIDIA GeForce Go 6800
Current Installed Driver : 179.67
Latest Driver Update :
The manufacturer of this system requires that you download the driver for your GPU from their support site .....
View 4 Replies
View Related
Apr 5, 2009
I've just got PowerDVD 9 Ultra and I'm having a few problems
I can't get it to output audio over the HDMI connection to my TV when playing a Blu-Ray
With PowerDVD 8 it paid attention to the default device in the Playback control panel.
No matter what I do PowerDVD 9 will only play audio through the Speaker/Headphones - even if I set the HDMI to the default output device .....
View 3 Replies
View Related
Dec 22, 2007
My Inspiron 9300 has the following specs:
Pentium M 1.6Ghz pin modded to 2.13Ghz (previous CPu was 1.73Ghz) , 2Gb RAM (667Mhz sticks), 6800 Ultra (Xps Gen 2 Bios flash-A05, previous card was an X300 64MB.)
I seem to be getting odd 3DMark05 socres, around the range of 4500, I tried overclocking the 6800 Ultra to 500/1166 and that produced a result of around 5000. The odd thing is that 3DMark05 appears to be running "choppy" every other frame it seems to skip producing a choppy flow of the tests, the frame rate also fluctuate by about 5 FPS in somewhat low movement/action scenes.
I have tried numerous drivers all resulting in the same thing (every driver has been cleanly installed). I am also quite certain that it's not a temperature issue as the max temp the card reaches (according to I8kfanGUI) is around 80-85 C. Just to be certain I ran 3dmark while the laptop was in an ambient temp of -5C (holding laptop outside the window ;]) and still the same...although max temperatures were a lot lower.
So is it possible that the card is for some reason throttling back and forth from the high performance 3d profile (450/1064/1.38v) to the low profile one (250/658/1.1v)?
I got the card from eBay over a year ago now and thus have no warranty on it.
Has anyone else had a similar problem and found a solution?
I am currently considering flashing the card with a custom BIOS, using NiBiTor 3.6 get BIOS from card, change ONLY throttling values to 450/1064 and also voltage to 1.38v, do not touch anything else, save the BIOS burn to CD (alongside a copy of original BIOS read from card)-[no floppy] and flash.
However I am a bit worried about killing the card, has anyone attempted something like this? Also the ROM files generated by NiBiTor are exactly 64,000 bytes is this alright?
View 15 Replies
View Related
Mar 3, 2009
Does anybody know the performance difference between Dell's 64 GB "Ultra-Performance" SSD and their 128 GB "Mobility" SSD?
In Canada, the 128 GB Mobility SSD is $589 extra, while the 64 GB Ultra-Performance SSD is $648 extra.
I would really like to know how much (if any) performance I would be sacrificing by going for the bigger (and cheaper) Mobility SSD.
View 10 Replies
View Related
Apr 22, 2009
had a dell e4200 with the ultra performance solid state drive upgrade in my hands for a day or two last weekend. i'd looked everywhere for benches on the upgraded drive before purchasing, but i couldn't find them anywhere. so when i got the computer i decided to take some benchmarks to help out any other shoppers.
couldn't take any write benchmarks because the drive was an o.s. drive. i believe this drive is an slc drive with samsung's second generation ssd controller.
i don't have access to the laptop anymore, so i might not be able to answer any questions you may have about the drive or the laptop itself. but i'll try my best.
View 11 Replies
View Related
Apr 6, 2008
What do you use to clean your screens with? I have grubby little fingerprints ALL over mine, and it is especially annoying on black screens in movies/games and such.
I almost bought a pack of normal "LCD Cleaning Wipes" but then I noticed it had Alcohol in it and shyed away from it. Why? I'm assuming that Alcohol would hurt the sensitive gloss finish on the screen, but my assumption could be wrong (and hopefully it is, would be much simpler to use those wipes). I also tried just using a dry wash cloth and just gently rubbing the prints off, but it only smeared them, and I'm afraid I'll damage the screen if I push any harder than I already am. Using a wet wash cloth seemed to have no effect either.
So how about it? What method do YOU use, and find best, to clean your screens?
View 15 Replies
View Related
Apr 12, 2013
Keyboard backlit stopped working (it used to work earlier). In BIOS the keyboard is now defined as a nonbacklight (BIOS was updated by L521XA13W.exe from dell.com/support/drivers), not sure how it was defined while working...
I've looked for a solution at community.dell.com/support-forums: - pressing Fn+F6 doesn't switch it on,- launching BacklitKB.exe from QuickSet says the backlight is on but it's not (I can adjust brightness, timing, turn it off/on but it still won't work),- reinstalling the QuickSet doesn't work,- Windows Mobility Center lists the backlit keyboard, but doesn't bring it on;- putting it to sleep and waking it up also doesn't work as well as restarting it.
View 2 Replies
View Related
Nov 4, 2009
I was wondering how does this CPU compare to the Intel line-up.
I could not find any benchmarks that compare it head to head.
So would it be equivalent to T6600 or P7450 C2Dou's series?
AMD Turion Ultra ZM-82 "Griffin" 65nm
Frequency: 2200 MHz
L2 Cache: 2 x 1 MB
Hyper Transport: 1800 MHz
Multiplier: 11x
Power Consumption: 35 W Socket S1G2
View 10 Replies
View Related
Aug 23, 2009
does anyone know if apple will be making an ultra-portable anytime soon? i prefer apples to windows but i dont like the big size and im not a fan of the air.
View 8 Replies
View Related
Apr 11, 2010
I've a Vaio TT that I'm (or was) fairly happy with, and before that I had the TX and the TZ.
I would however like to replace the TT since the Blu-ray has stopped working for the second time and I just refuse to pay an insane amount of $ to have it fixed. The question is, - Replace it with what?
I want an ultra-portable, i.e. 12" or smaller screen, weight less than 3 lbs, and it must have Blu-ray and SSD. Where can I find one
View 10 Replies
View Related
Apr 17, 2009
the sata drivers for install the windows xp, i would like to know where can i find? my notebook its an hp dv4-1155se, amd turion x2 64 ultra(zm-82)
View 3 Replies
View Related
Oct 3, 2014
I have two aspire one running XP and one is very slow. I switched the HD and the problem remains with the notebook. I did upgrade the BIOS to the latest one, no change.
What I found is that the ATA/ATAPI controller is set to MODE PIO on the slow notebook and I cannot change it to ULTRA DMA. When I change the driver to the right one then at startup I need to get back to the previous correct configuration as oit will not load windows..
View 2 Replies
View Related
Mar 2, 2009
Ok, so I really needed more hard drive space in my T350p, I am guessing alot of you are in the same boat I am and the machine is great if only it had more hard drive space.
Unfornately pretty much all the large drives are in either Zif or sata, so changing the internal drive was not going to get me much more space.
So, I looked at other options. I did not want to use an external, they are great and I have several of them, but it is just not as conveniant as having a large built in drive.....
View 3 Replies
View Related
Mar 18, 2009
My requirements are as follow:
Screen size : 11 inch
Weight with battery : below 1.3kg
RAM: 2GB or more
Wireless Network : 802.11b/54Mbps(802.11a/g)/300Mbps(Draft 802.11n)
Hard Drive : at least 120GB
Prefer to have carbon fiber casing
Any particular model I should look for on ebay or in the current market ?
View 10 Replies
View Related
May 6, 2014
New W540, bios 2.10, latest drivers installed, 20BH
My w540 is not registering my Samsung 840 Pro SSD in the 9.5mm ultrabay adapter.
Not showing in BIOS, and not showing in disk manager or in device manager anywhere. I just want to use it as a second drive.
Main drive is 7200 rpm - with a Win 7 corporate image on it.
View 1 Replies
View Related
