had a dell e4200 with the ultra performance solid state drive upgrade in my hands for a day or two last weekend. i'd looked everywhere for benches on the upgraded drive before purchasing, but i couldn't find them anywhere. so when i got the computer i decided to take some benchmarks to help out any other shoppers.
couldn't take any write benchmarks because the drive was an o.s. drive. i believe this drive is an slc drive with samsung's second generation ssd controller.
i don't have access to the laptop anymore, so i might not be able to answer any questions you may have about the drive or the laptop itself. but i'll try my best.
Hey guys I've been browsing the forums for awhile for the XPS 16. Since I don't have the throtlling problem (Thank god because of the new bios and 130 watt adapter)... I'm wondering what the best drivers are for the ATI Mobility graphics..
To be honest, I'm not getting good framerates at all..
I'm using the mobility drivers straight from ATI...
Now I see 3 options.. 1. From dell 2. From ATI Striaght 3. Desktop ATI Modded
I am looking into an E4200 with the SU9400 (1.4) processor. I understand that individually the high performance would be faster, however when assessing its speed as a whole system (the E4200), is there much of a "real life" value to getting the faster HD?
In the interest of maximum (safe) performance, I will test both generic ATI drivers and official Dell drivers with real-world benchmarks (probably mostly video games).
I will test Dell's official ATI driver, the generic ATI 10.4 driver, and any beta driver available from ATI's website. I will not be testing third party drivers.
ATI recommends that Dell laptop users use the Dell drivers. Dell recommends that Dell laptop users use the Dell drivers. Which is actually better? We're going to find out.
The test should take place within a week. Right now I need to find a few games that can produce consistent results (i.e. number of fps when watching a pre-recorded demo). Any ideas or requests for games to use? (free game demos, please)
I will be testing Resident Evil 5 benchmark demo, set in fixed mode, DX10, default settings. It gives an average fps reading.
I might also test Quake Live (I think it has a good timedemo test, need to find out) and Starcraft II beta if I can find a way to average its fps reading (does FRAPS do this?).
When I find 3 total tests that I can perform, I will begin testing.
UPDATE: thank you to gaah for performing the driver comparison test.
Test Results: The Dell driver's performance is equal to the performance of ATI 10.4 driver. The Dell driver offers additional features such as the HDMI/DP Audio driver and AVIVO.
Actual test results: XPS 16: Performance Test of Mobility Radeon HD 4670 drivers
So at first I was confused but now I understand. First official, completely top to bottom support for all mobility cards (in the specified range of course) will come out with 10.3. What they didn't say that SOME mobility cards will be already supported with 10.2 and our " Dell (Studio XPS 16 Mobility Radeon HD 4670)" is on that list.
This was posted in another thread, but this wasn't the focus. They also have beta 10.3s...but I thought it was neat that official 10.2 WHQL certified drivers supported our card ....
I have a client that's getting a 64gb SSD as part of his E6500. I advised him to go with aftermarket RAM and an X25m, but he wanted to stick with all Dell.
Ever since I saw newer systems being offered with Dual SSD drives in RAID for 128GB of SSD storage I've been wondering if I can do that with my XPS m1710.
My 100GB drive is just too small. I've been looking at replacing it with the Hitachi 200GB 7200 RPM drive, but I thought I'd look at the SSD option as well.
I have an older Samsung SLC RBX series 64GB SSD lying around. This was one of the very first generation SSDs to come out on the market. I was interested in installing this in my early 2009 15" MBP, and I wanted to ask how the experience of a limited hard drive (i.e. only 64GB) will be in Mac OS X. I am currently on a 500GB WD Scorpio Blue, and have about 50% used with various documents, music, etc. Obviously, I realize that I won't have the same functionality with a more limited hard drive. However, the speed improvement I think will be far worth the decrease in capacity, and I was hoping that someone with experience running Mac OS X on lower capacities drive could chime and let me know of some of the pros and cons.
I just received my newmacbook today and when I try to install mac onto my gskill ssd, it won't recognize the drive. Anyone know a fix for this issue? the phillips t00 screw is stripped as well so I cant even take out the retention bar. If there is anyway to install the os without removing the hdd.
I got a Dell Latitude E4200 with a Samsung SSD PB22-JS3 TM 64GB drive. Does anyone know if its firmware can be upgraded to support TRIM in Windows 7? Current
firmware version is VBM19D1Q. Seems like the version that support TRIM is VBM19C1Q. Doesnt that seem like a downgrade? I've had my notebook since October 2009 so I dont think it has TRIM support from the factory.
Firmware location I think is here: http://www.samsung.com/global/busine.../business.html
I currently own a XPS Gen2 I purchased in Oct 2005. When I was deployed back to Iraq this past year it started acting up and now when I boot it the screen is just black. I have been told by a few people that it is the Vid card that has died on me. If so. Is there any modding to put a 7800gtx in it? I have seen on the forums where I can purchase one for around $260US.
I'm getting with my rig with everything turned on LOW at native res (1440 x 900). I am using the recommended 163.44 drivers. This is garbage, isn't there anything I can do to make it better?
Pentium M 1.6Ghz pin modded to 2.13Ghz (previous CPu was 1.73Ghz) , 2Gb RAM (667Mhz sticks), 6800 Ultra (Xps Gen 2 Bios flash-A05, previous card was an X300 64MB.)
I seem to be getting odd 3DMark05 socres, around the range of 4500, I tried overclocking the 6800 Ultra to 500/1166 and that produced a result of around 5000. The odd thing is that 3DMark05 appears to be running "choppy" every other frame it seems to skip producing a choppy flow of the tests, the frame rate also fluctuate by about 5 FPS in somewhat low movement/action scenes.
I have tried numerous drivers all resulting in the same thing (every driver has been cleanly installed). I am also quite certain that it's not a temperature issue as the max temp the card reaches (according to I8kfanGUI) is around 80-85 C. Just to be certain I ran 3dmark while the laptop was in an ambient temp of -5C (holding laptop outside the window ;]) and still the same...although max temperatures were a lot lower.
So is it possible that the card is for some reason throttling back and forth from the high performance 3d profile (450/1064/1.38v) to the low profile one (250/658/1.1v)?
I got the card from eBay over a year ago now and thus have no warranty on it.
Has anyone else had a similar problem and found a solution?
I am currently considering flashing the card with a custom BIOS, using NiBiTor 3.6 get BIOS from card, change ONLY throttling values to 450/1064 and also voltage to 1.38v, do not touch anything else, save the BIOS burn to CD (alongside a copy of original BIOS read from card)-[no floppy] and flash.
However I am a bit worried about killing the card, has anyone attempted something like this? Also the ROM files generated by NiBiTor are exactly 64,000 bytes is this alright?
What, if anything, is needed to be done in order to upgrade my system from having a 6800 Ultra card to a 7800 GTX card? Do I need to purchase any additional parts?
I'm in the processes of cleaning out my XPS Gen2 for the first time since 2005 (yes yes I know...) because it started shutting down during some games. The question I have is related to the heat pads on the video card memory, FETs, and on the chipset heatsink. I know these things suck. I want to use AS5 in place of them but there is a gap between the heatsinks and the memory/chipset/fets when you remove them. How have you guys gotten around this? Is there a better version of a heat pad and where would I get them?
A couple weeks ago I put my laptop (a Dell XPS M170) beside my bed cause I had to use the MC Alarm to get up cause I had to be up at like 4 AM and I don't do well with the beep beep alarms.
Anyway, I plugged it in and sat it on the floor on top of (for lack of anything better) two Arizona tallboy cans laid longways (the feet sat on these) with a chess set box underneath (in case
it happened to slip off one of the cans). I also left the screen partway up. Well of course I left it on overnight for the alarm, but when I got up to go to the bathroom ...
What do you use to clean your screens with? I have grubby little fingerprints ALL over mine, and it is especially annoying on black screens in movies/games and such.
I almost bought a pack of normal "LCD Cleaning Wipes" but then I noticed it had Alcohol in it and shyed away from it. Why? I'm assuming that Alcohol would hurt the sensitive gloss finish on the screen, but my assumption could be wrong (and hopefully it is, would be much simpler to use those wipes). I also tried just using a dry wash cloth and just gently rubbing the prints off, but it only smeared them, and I'm afraid I'll damage the screen if I push any harder than I already am. Using a wet wash cloth seemed to have no effect either.
So how about it? What method do YOU use, and find best, to clean your screens?
I have been looking into upgrading my 9300 from the 6800 to the 6800 Ultra for the past couple of years now. The prices are finally reasonable enough to do the swap. My question is would the swap even be worth it these days? Is it still a good enough card to make it worth my while to come up from the standard 6800 even with overclocking it?
Keyboard backlit stopped working (it used to work earlier). In BIOS the keyboard is now defined as a nonbacklight (BIOS was updated by L521XA13W.exe from dell.com/support/drivers), not sure how it was defined while working...
I've looked for a solution at community.dell.com/support-forums: - pressing Fn+F6 doesn't switch it on,- launching BacklitKB.exe from QuickSet says the backlight is on but it's not (I can adjust brightness, timing, turn it off/on but it still won't work),- reinstalling the QuickSet doesn't work,- Windows Mobility Center lists the backlit keyboard, but doesn't bring it on;- putting it to sleep and waking it up also doesn't work as well as restarting it.
For whatever reason, my 6800 Ultra in my XPS Gen2 I got awhile ago went dead. Can anyone suggest where I can get a replacement on the cheap(er)? I bought the 6800 Ultra upgrade for $500 back then and now spare parts wants $599 for one.
does anyone know if apple will be making an ultra-portable anytime soon? i prefer apples to windows but i dont like the big size and im not a fan of the air.
I've a Vaio TT that I'm (or was) fairly happy with, and before that I had the TX and the TZ.
I would however like to replace the TT since the Blu-ray has stopped working for the second time and I just refuse to pay an insane amount of $ to have it fixed. The question is, - Replace it with what?
I want an ultra-portable, i.e. 12" or smaller screen, weight less than 3 lbs, and it must have Blu-ray and SSD. Where can I find one
I have two aspire one running XP and one is very slow. I switched the HD and the problem remains with the notebook. I did upgrade the BIOS to the latest one, no change.
What I found is that the ATA/ATAPI controller is set to MODE PIO on the slow notebook and I cannot change it to ULTRA DMA. When I change the driver to the right one then at startup I need to get back to the previous correct configuration as oit will not load windows..