suggestion on Dell's IdeaStorm requesting them to do a single 8800GTX upgrade module for the M1730. Dual 800GTXs are really unnecessary because SLI game support is spotty at best. (especially in Vista) In addition the Dual "card" module is going to be much more expensive than will be a single 8800GTX. I would a expect the single card module to be hundreds of dollars cheaper. I just can't see spending another $1000+ on a laptop that has already cost me over 4 grand. [url]
I have a Dell XPS M1730 with 8800 GTX SLI still in warranty that broke down. The reason : error code 43 aka one of the video cards is burned. That is what the guys at the service told me right now.
I have been reading the forums here and saw that many of you guys have the same problem and got the option for a replacement, more exactly , Alienware.
My situation is this , my laptop has been in service for more than 2 weeks and today i got an e-mail saying one of the video cards is broken and that they ordered a new one from DELL and its due to arrive in 7 -10 days. They did not ask me anything if i agree or not.
What i read is that this laptop is not in production anymore and so is the 8800 gtx card cause of bad engineer manufacturing ....
I've been playing BF2142 at max settings since I got the new notebook. Then suddenly I can't play it anymore... It freezes and goes black after 5-15 seconds of playing, leaving ctrl-alt-delete as only option.
At the same time, I can play Quake: Enemy Territory (which seem to demand alot more from the gpu) just fine (on somewhat lower settings though, but never freezes)
I'm using the infamous "hacked" performance drivers, can't remember the name.
I'm looking to buy one of these cards, i currently have the dual 8700M GT's sli in my m1730, love the laptop but would like a bit more 3d performance.
So if i can get my hands on one of these decently cheap it would be great as opposed to buying a whole new notebook, which i am not financially in the place to do right now!
I have my friend's laptop with Core2Duo T8300 processor and wanted to upgrade to X9000.
Can anyone suggest me how to do that with some links for the picture guided or video instructions? Also, what are other components needed for this upgrade? Infact,
So, this is the second time I've been unable to answer a technical question on my own, this makes me sad... But I'll live.
The problem is the following.
I've begun playing the Battlefield Bad Company 2 beta quite a bit and I've recently found that my lacking FPS is caused by my somewhat outdated CPU, which I really should have concluded earlier,
but spilled milk and all that. So I've been looking into upgrading and quite honestly, I have no idea what my options even are. I've been unable to find any compatibility related sites that could even as much as inform me what current CPUs are suited for my machine, so here I am, asking people far wiser, more clever, and most likely better looking than my self
how the 8800GTX SLI on the XPS1730 handles Crysis at high resolutions.
Also, my wife was breastfeeding and spilt breast milk all over my keyboard. I tried licking it off but couldn't get all of it. How do you recommend i clean it?
Im thinking about upgrading my processor in my M1730 from my 2.4 to somthing with a little more mustard.
I am concidering the X9000.... Will this work with my m1730.... also does 1730 have potential for 64 bit.... Im lost as I have been out of the loop on this machine for a while.
Knowing that you can upgrade the graphic card + ram for m1730, but I wonder if there is any possibility for you to upgrade the processor for m1730 or not. Right now,
I'm having intel 9500, but hope that I can move to extreme 9000.
Currently running vista 32 and I want to upgrade to windows 7 64 but on the dell device driver's page there is no support for windows 7. Only XP and Vista drivers are listed.
Will the drivers automatically update through Windows 7 or do I try to find the drivers myself?
I couldn't find an actual thread about this so I figured I'd start my own that can be easily picked up by search engines assuming your good selves can add some good info to it I took the plunge after finding a final stepping X9000 OEM chip on Ebay for 269£ and I'd like to upgrade from my T9300. I'm fairly used to working on open laptops and I replaced the CPU in my old Inspiron 8000 with no problems so I figured I should be able to handle this swap as well.
However, I have a few questions.
1. I read in the M1730 thread "Dell is offering the X9000 but like ifti was saying it should be that hard of an upgrade because it looks like u can do it without removing the motherboard
the only thing is this may void your warrenty ud have to check that" Has anyone successfully switched the CPU on the M1730, and can they confirm that you don't need to remove the entire board and the screws are accessible from the top of the board to remove the CPU?
2. What can I use to clean the existing compound that I will have to remove before applying my own compound (Arctic Silver 5)
If I bought m1730 with geforce 8800m can I upgrade it later to get the geforce 9800m? If yes, do I buy the video card and install it myself or I buy the card and dell technician will come to my house and install it for me?
I have a xps m1730 that is equiped with geforce 9800 sli already. I want to know that in case that I want to upgrade the video card, what card I can put in for this laptop.
I should be getting my upgrade (Pro 64) within the next week and was wondering which method is better. I obviously know that it will run a bit faster for the first month or so with clean install, however, my concern is with the activation of the dell free upgrade version. Will it simply be boot the free upgrade disk and install and it will be activated fine? Or, is there more to it? Also, say a year from now I wanted reformat/reinstall win 7... How would I go about doing that with the dell free upgrade DVD?
With all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
Quote:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
I have some issues with my video since I upgrade the nvidia drivers from the nvidia web site. I removed the drivers and I reinstalled the original ones with the same results.
Does the Windows drivers upgrade also upgrades the video firmware as well?
I'm installing x64 XP Pro on my system (check my sig) after using x86 XP pro for many odd years. I was hoping I could get some help cultivating all the x64 bit compatible drivers for my system because this is a large undertaking, and all my drivers I have backed up to flash drive are for my current 32-bit system, so this is overwhelming to me...... I was hoping I could just get some help from the community retrieving OEM drivers (not Dell drivers) for my system. I want everything up-to-date, including RAID matrix manager and chipset drivers....
i have 2 problems with my m1730, one the keyboard lights stopped working, is it driven by a driver or something or what? my 2nd problem is device manager is telling me i have an unknown pci device and is always asking me for driver software. windows has directed me to nvidia for the driver. i know it is the physx processor but the physx control panel says no physx processor installed.
