I have some issues with my video since I upgrade the nvidia drivers from the nvidia web site. I removed the drivers and I reinstalled the original ones with the same results.
Does the Windows drivers upgrade also upgrades the video firmware as well?
Sony has just released a firmware upgrade for UJ-220 Blu-ray drive.
It seems to fix the problem with some BD movies not being recognized by my drive. A list of compatible models can be found here.
I have this laptop and have used it for 2.5 years with great success, besides the touchpad reversal/random clicking issues (fixed under warranty). I'm using XP SP3. I bought a spindle of DVD-Rs and they aren't recognized as being empty using ImgBurn. Same brand I usually buy, too, which has worked before with no problems or coasters.
I checked and this SZ680 has a MATSUA UJ-852S drive. Right now it has v1.01, I've searched and found/tried this:
[url]
But that mentions the UJ-852 and I have 852s. Either way, it doesn't work, just fails and says "F/W loader does not apply." I searched and also found: [url]
I just received from ebay a nvidia Quadro 770M 512MB
Quote:
[url] or[url]
as an upgrade for my HP 8510p which currently has ATi HD2600 256MB.
Both cards are MXM II (physically fit) however I'm afraid that this VGA is not on whitelist so it's not going to work - I only get blank screen, no error message, no POST, no chance of entering BIOS. I read that there is some tool that can modify BIOS - something called HP Tattoo utility however maybe it's obsolete now and has been replaced by some other utility - I can't even download it anywhere.
i have dell studio 1558 system.i have replaced dvd drive in warranty period. i wanted to upgrade dvd drive firmware because i am unable to read some dvd's. the problem is that, on dell website after putting service tag number for drivers, list shows dvd drive firmware for old dvd drive i.e tsst firmware.
my current dvd drive is MODEL NAME: HL-DT-ST DVD+-RW GA31NVERSION: A200OEM CODE: 10/
Having geforce go 7900 gs 256 Mb (17 inch, 1920x1200) died after 2 years of using it, but played only moderately. I noticed sometimes GPU was over 80 C. No more warranty, so I plan on getting a replacement.
7900 gs is 20 Watt current consumption. There are cards like 7900 GTX, FX2500M tht have 45 Watt. So roughly we could expect twice as much heat made if replaced to a 45 Watt card. Am I right here? Now, even 20 Watt card (7900 GS) was overheating with only single heat pipe. 7900 GTX or FX2500 would have to have for sure 2 heat pipes, but since we have twice as much heat, do we have the same situation?
What is your experience with 45 Watt video cards in Inspiron E1705 / 9400 ? Do they overheat (and break) as often as 20 Watt and single pipe cards?
And second question - reliability of refurbished cards or "working pulls" How long can they last? I know it all depends, how the previous owner was using it, etc. When buying used card, what possibly was overheated more? 20 Watt single pipe or 45 Watt dual pipe (like the question above)
I would appreciate any oppinion and experiences from you.
In the future, I plan to better take care of cooling, remove dust more often, use AS5 paste, fan control, use dual pipe. Anything else can be done? Maybe going to 20 Watt with 2 pipes - would probably cool down system the best.
I'm trying to install the latest driver for my Geforce 9300M card. But when I find the driver dowload page from the Nvidia site, they invariably state that...
Quote:
The following notebooks are not supported in this release:
Sony VAIO notebooks (please contact the notebook OEM for driver support for these notebooks)
The Sony site does NOT contain drivers for the gfx card.
can I to upgrade graphic card for this device
View 1 Replies View Relatedwhich r better in ur experience for the GeForce 9600 M GT FTW?
View 9 Replies View RelatedI've got a HP Pavilion dv6000z notebook. It came pre-installed with Windows Vista Home Premium 32-bit but, I recently changed the OS to Windows XP Home Edition SP3 32-bit. It was a completely new installation of the OS.
Now, I've got a weird problem. I watch the NBA games on this website for international viewers at ilp.nba.com and it goes through an external company named RayV. They provide their own software to watch the games on, I believe it is a p2p kind-a program [if that helps?]; RayV Viewer. In this, the broadcasted video size is 608x336 or something like that and averages about 800k-1000k speed/bandwidth?. They call it the "HD" version.
The problem is, the video continuously "stutters" every 4-7 seconds.
My room mate has the newer dv5t series notebook with an intel core 2 duo 2.0ghz processor nd an intel integrated graphics adapter [x3100/4500?] nd the video works absolutely perfectly on his notebook. Same goes for my friends Apple Macbook [old "lower spec'd" white version] however with mine it has this continuous stuttering problem. I've tried increasing the process priority through task manager but that didn't help either.
Most HD videos work fine in WMP [.mkv 720p] though they stutter every now nd then too.
Like about every 10 - 13 minutes, maybe a little bigger gap but it happens nonetheless.
I've tried the 182.08 drivers from laptopvideo2go.com & the DOX 182.46 version as well as the 86.38 version from windows update but none of them have been able to solve it. Any ideas as to what I could try?
I'm currently downloading the beta of Windows 7 to see how that works on this notebook, I believe the RC is just about to be released & is on some sites so could give that a shot but would love to solve it in XP itself.
I can FINALLY overclock my 8400M GS! Ever since after 169.04, all the drivers would go back to default clocks as soon as I hit Apply in any program I tried, but not anymore!
[url]
Windows 7 users, this apparently is the first nvidia driver that supports Windows 7....the setup of the driver install said Windows 7 32-bit Setup
New drivers for the 9600M GT (Vista 64) here:
[url]
Search page for other versions here:
[url]
Are these safe to install on my DV7T? I notice HP has never issued an official graphics driver update for this notebook. The one and only version from them is from November 2008.
The release highlights has me salivating - particularly the bit about a 45% increase in Mirror's Edge with antialiasing enabled. Since there are about 7 months of driver updates in this release I should see some big improvements in my games.
I have a Aspire 6930G, I want to upgrade to windows 7, from Vista. But this laptop came with Vista recovery CD's so the drivers are on those CD's can I still reformat and just put the drivers CD inside and reinstall them after I've changed to windows 7? By the way, I want to completely format the Hard Drive before I do any of this...
View 4 Replies View RelatedMy DV7T Quad has the 320M card in it, but when I pull up the drivers for my system on HP's website, it shows drivers only for the 230M. I assumed that perhaps the 230M drivers would install on a 320M card, however that is not the case.
Is there a reason why there is no 320M drivers on HP's website? I can't imagine NVidia releasing hardware when they have no drivers for it. Right now I'm forced to use drivers that are in the "SwSetup" folder in order to install the drivers for my card...it appears to be some type of generic NVidia driver...which is totally not cool. I called up HP about it and they confirmed there is no 320M driver but had no explanation for it.
I have an aging M1210 with 2 gigs of ran, a OCZ SSD & the C2D 2ghz T7200 processor.
I wasnt really planning on an upgrade but the pricing looks pretty good.
I am not sure if its worth it though. My M1210 with SSD is amazing.
I just dont know if going from a 2.0 T7200 to a 2.66 T9550 is worth it or if i should wait longer for an I7 system in this size?
With all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
Quote:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
For optical drive matshita UJ880AS:
- firmware v 1.22
- available via Sony Update or eSupport
I recently got a Dell Precision M4300 from a friend and had a few questions.
When i got the laptop, I reformatted the Laptop and Reinstalled Windows XP Pro SP2. I proceeded from Microsoft to Update to SP3 and so on.
Well I also Went to Dell's Website and downloaded all the necessary drivers (using the service tag) for this laptop and installed them.
Now here is where I ran into a problem,
When I installed the NVIDIA drivers for the NVidia Quadro FX 360M video card, everything seemed to go fine. Then I rebooted the Laptop, and now every time I reboot, my hardware acceleration is defaulted back to None, and it gives me multiple pop ups about this issue. I go into the settings and turn the Acceleration back to full and it goes away.
This is a major problem, and is really frustrating to deal with everytime the laptop is booted up.
My other problem, is when I open up Internet Explorer, It tends to lock up the browser for no reason when Loading a website. I then CTRL+ALT+DEL and attempt to close iexplore.exe via the task manager. It closes the browser but does not shut down the browser, making it impossible to browse, so then I have to reboot.
here are the specs of the PC, from the device manager and drivers I have gotten
Dell Precision M4300
NVidia Quadro FX 360M 512mb Video Graphics Card
TSST 8x dvd+-R burner
120GB Hard Drive
3.5GB of Ram
2.5GHZ T9300 Core 2 Duo Processor
1394 Port
2 USB ports
External Monitor Ports
Wifi Support
Bluetooth Support
Windows XP SP2 Pro
I should be getting my upgrade (Pro 64) within the next week and was wondering which method is better. I obviously know that it will run a bit faster for the first month or so with clean install, however, my concern is with the activation of the dell free upgrade version. Will it simply be boot the free upgrade disk and install and it will be activated fine? Or, is there more to it? Also, say a year from now I wanted reformat/reinstall win 7... How would I go about doing that with the dell free upgrade DVD?
View 10 Replies View RelatedI installed the latest Nvidia drivers (179.48), Since I then when the video turns off the laptop does not respond any more and I have a black screen. I uninstalled the drivers and I reinstalled the original HP (179.04) and I still have the same issue.
I uninstalled the latest video drivers using the control panel.
I did an upgrade from win vista x32 to win 7 x64 on my Dell Studio 1735. In order to do that upgrade I did change the HDD to a 1 TB and update from 3GB to 4GB ram.
Now I have on item still not working after that upgrade. The integrated biometric (fingerprint reader) refuse to work. Windows 7 x64 did detect that it was an Authentec device, and installed it driver.
But If I installe the software for the reader. It refuse to install and give this as the reason (No driver installed for the reader) I've tried to replace the windows driver with the original Authentec drivers, but windows 7 replace the drivers with it's own.
Any windows 7 drivers out there for my Authentec integrated device ?
I have been having a lot of issues with my Precision M4700 stalling during boot, directly on the display of the Windows logo so I am attempting to reinstall, btw there are serious issues with recovery mode but that is another issue.
My system is English spec but was bought in Germany so I have a German tag. When I choose the firmware and drivers for my machine I am offered a very different versions to those offered for my model. In particular, I see CV version 2.2 when the version offered without using my system tag is 2.3. Are there technical hardware differences or is it just that the German language version of the software isn't yet available?
Just opened my girlfriend's laptop, and saw that it had:
CD/DVD Drive TSL462 ver. C
PC2 4200S 4-4-4-12 latency RAM 1 512 MB stick
Dell P/N 0C9063 WiFi Card
I was wondering if someone could give me a link to updated drivers/firmware for the DVD drive and the Wifi Card. I already updated the Intel Chipset from the Intel website.
Also, what is the best kind of RAM it will accept? I was thinking two 1GB sticks of pc2-5300, but I don't know if it'll accept that much? It is Dual channel memory, but it's only using one channel right now obviously. Any help is appreciated, as I need to get her computer in working order by Friday.
I am trying to upgrade to windows 7 with the free windows 7 upgrade kit I have both Cds and i put in the home premium windows 7 cd it starts up and tells me "run-time error 70' permission denied"
my laptop is Fw490jeb
I have noticed that when I try to run "model.txt" it does not show up and when I go to system it does not detect my processer and other things...
Does anyone know if Dell modifies the video card drivers that they post on the driver download website specifically for their machines?
Or do they just download the latest drivers from the Nvidia webiste test on a particular machine for a little while and either pass or fail the driver for official use?
I own a "Dragon" and was wondering what the best CPU is out there right now for it? I've been hearing about this X9100. if I can put that in this computer?
View 3 Replies View RelatedI have a DV6 1150ei
2.13 GHz Intel Core 2 Duo Processor P7450 3 MB Level 2 cache
ATI Mobility Radeon HD 4530 512MB memory
3Gb DDR2 Ram running on VistaHP
3dMark06 gives me 3333
WEI has 4.7 for Win graphics,5.0 for gaming graphics,rest are 5.1 and over.
With the other card available with the DV6 the ATI Radeon HD 4650 it seems like i should be able to double the above 3dMark06 score according to [url].
What i'm thinking of doing is getting parts & changing to
Intel Core 2 Duo Mobile processor T9900 - 3.06GHz (Penryn-MV, 1066MHz front side bus, 6MB total Level-2 cache. (Part # 570434-001)
System board (motherboard) - For model with ATI Mobility Radeon HD4650 graphics, 1GB memory (Part # 518431-001)
CPU fan and heat sink assembly
(Part # 518435-001)
I THINK the 4650 and the T9900 is as high as i can go without risking a bios issue as their both available on a DV6 CTO and appear to use the same bios(F.24A).
To stick to a "P" series processor i would need to go with P8800@2.6GHz.
4650 is still only 64bit so has anyone gotten a better ATI card to run in a DV6? (EDIT: wrong, the 4650 is 128bit)
I've got an HP 530 with a Intel Core2 Duo 1.60 GHz 2MB cache, 160GB HDD, 2GB RAM. I want to know how much RAM I can put in the laptop? I was thinking about upgrading to 4GB if possible. I can't find any support pages that tell me the maximum upgrades.
View 4 Replies View RelatedI just purchased a brand new HP DV7-1232nr laptop.
-what does the "nr" suffix mean on this model?
-What caddy part number do I look for if I want to install a 2nd hard drive?
-I see there is a plug on the bottom side, under the cover to install a tuner. What can I install there and can I pop the small circular cover off where an antenna would connect near the power plug on the right side?
-What other options, upgrades, or mods can I do to this model?
4g ram, 320G HD, 2.2Ghz AMD Turion X2
I have hp8510p (intel gm965 chipset) with intel T9300 cpu. Can this be upgraded (at home)? Is this even possible to change notebook CPU?
If yes - what specs must be same old vs new? Socket is "P-478" so this has to be same, should the FSB speed be the same also?
One more question - I've got pc2-5300 333mhz ddr2 memory. can I put there something faster?
edit> is upgradit of the GPU possible? can I change the pci-express video card? I've got radeon 2600hd, could this be changed?
I'm just looking to the future because I want more processing power but I don't want to buy whole new notebook...