you can add 8gb of 800mhz ram?
whys that when you can only use 667 on the current processors that are in there?
maybe they might actually just add centrino 2 processors to the m1530?
i wouldnt mind, and i would probably buy one, as i cant be bothered waiting for the magical studio 13/16.
i quite like the m1530 design, so i hope they now add the processors and graphics card, and im buying one
I have an XPS Gen 2 Laptop. I know its like ancient now but after 3 years its still running pretty well. The problem is I'm getting severe fps drops in games and I realized something strange happened to my cpu.
The cpu load is going crazy because the cpu clock speed is locked at 800mhz.
I thought it was something wrong with SpeedStep but I turned that off and nothing changed. My cpu will not go past 800mhz.
Why is my cpu downclocked and what can I do to make it normal again. Dell BIOS doesn't really let u manipulate anything.'
CPU-Z shows
Core Speed: 798 MHz
Multiplier: x 6
Bus Speed: 133 Mhz
Rated FSB: 532
Just got my 1647 set up (replacement for my 1640) and got sent an additional 4gb dimm and popped it in for a total of 8 gigs.
CPU-Z shows 8 gigs, everything works fine..The Memory tab is blank so it doesn't show what its actually running at or its timings or dual channel mode or not...Which caused me to think it wasn't running in dual channel mode..So I got everest ultimate edition and it indeed showed it was working in dual channel so I was happy..But then I noticed it reported the memory was running at 100mhz and in ddr3 terms that effectively is 800mhz...The ram should be running at a base clock of 133mhz or 1066mhz effectively. All the tabs report it as being rated at 1066 and all that registers fine..Its just the "actual clock" reports it at 100mhz instead of 133..
I thought back to the 4gb dimm I recieved..It was refurbished which made me think it was the culprit..So I did some tests. I tested each dimm individually and each time (alone and together) everest reported 100mhz (800mhz)..
So is everest to be trusted? Are both my dimms bad? Whats causing my dimms to run at 800mhz instead of 1066? There is nothing in bios to tweak so how can I change this? And let me repeat, both dimms, when installed BY THEMSELVES (so 4gb total) still report 100mhz...so it cant be the refurb dimm...
What gives?
My window index score on memory is 6.8..which is about what it was on my last machine which used the same speed ram..
Could everest be wrong?
I have a Studio 1555
I have a core 2 duo processor with 2.4ghz each core.
But for some reason speedstep works correctly and then randomly out of the blue it will throttle down to around 800Mhz and just STAY there, no matter what settings I've put, no matter if it's plugged in or not and no matter if I NEED more power.
I found a nice deal over Dell.com for this memory - yes, I know it's crazy but that was the cheapest place I found, they offered 15% off + FREE Next Business Day @ DHL, which sounds pretty good for me.
I'm going from 2x1GB DDR2 533Mhz to a 2x2GB OCZ DDR2 800Mhz@667Mhz with lifetime warranty for as low as $44 each module. I think will be great upgrade since my 2GB always wasn't enough!
I have a dell studio 1735, I changed my first boot disk, to an ocz Agility 3 and put windows 7 64 bits on it.
I changed the two slots of memories to an no name (compatible dell products) 4gb X 2 running at 800mhz eaches.
Put the first time I started my computer, it said it have to format the new memories before it would start windows, I accept, then these problems appears...
1- The memory was formated to 667mhz (the totality of gb still there: 8128mb of memory)
2-Many lags came (from video (streaming and on disk) and from a repeat task over a hard disk (I got two disks the other be an hybrid hdd/ssd) giving an error and closing the explorator of windows)
So I want to know if possible to reformat the memory sticks to/or put them to their native configuration of 800mhz....
I know the standard for this model is the 667Mhz DDR2, but I was curious if anyone had luck with 800Mhz memory on this model? I would like to upgrade the memory, but in case I cannot find a good deal on the 667 stuff, wondering if the 800 would work (albeit likely at the slower speed).
Also, any one get a quad-core processor working on this model? I know the T9500 is an awesome processor. I'm just curious.
My current RAM is:
1gb Corsair DDR2 667mhz (default from manufacturer) and
2gb Mushkin DDR2 800mhz
I searched through the internet that Acer 5920G can only support up to 667mhz.
The problem is, I'm planning to add 1gb more RAM, so it will be 2 x 2gb Mushkin 800mhz, since both of them will be downclocked to 667, will both of them still run in dual channel mode ?
I wanted to buy 667mhz one, buy every shop near my place says that 667mhz ram not distributed anymore and the price is quite the same.
I have Acer Travelmate 7520G (Turion TL-58) and upgraded from 2G of 667Mhz RAM to 4G of 800Mhz, however the memory is still running at 667Mhz and FSB:RAM being CPU/6. Chipset here is Ati RS690 and according to Everest it supports 800Mhz DDR2. There is no option in bios to change the RAM frequency or divider.. I have tried updating the bios with no luck.
View 5 Replies View Relatedi bought my wife a netbook, as she specifically requested, thing is, on 3cell 3hrs are great, but it has begun to "tear" a lot in WINXP.....
background services...etc have been seen to
so i check out CPUID and lavalys.....both showing Proc working along at 800mhz....i have tried to change power profile in XP ..... and tried making a new one, but there is no way to reduce that tearing effect...... it feels a bit sluggish to me, i am going to add a 2G module (accepts Elipda 2G module from my HP DV5T) so some RAM along those lines is wha i am aiming for......
how to stop/ allow the laptop to clock on OS load....cuz the 800mhz on the netbook is unacceptable.
I've bought this laptop back in 2008. Upgraded to windows 7 in Oct 2009.
I've always kept my laptop flat on my desk with no laptop cooler. My laptop has only been getting reallllly hot this pass month.
Attached is the HWmonitor graphic.
Is there more to this than just needing a laptop cooler?
When will the price of the m1530 come down?
I want it, but it costs a lot..
After christmas maybe? Or am I better off getting something else?.
I do live in canada so none of those amazing $400 off Inspiron/vostro coupons work...
I have an older m1530 from around when they were first released and I'm wondering If I could take advantage of more than 4GB of ram?
View 10 Replies View RelatedI had made the mistake of lending my XPS m1530 to a friend who is in the hospital due to cancer and she gave it back all messed up.
Most everything don't work. I can't get online, a lot of programs don't work, such as trying to right or left click in the taskbar and other places... nothing happens.
I tried system restore to before she got the computer and nothing changes.
I've ran AVG and spy bot and it found some stuff, supposedly fix them, but the problems remain. I defragged too.
So what to try next? Reformat? I don't want to if I don't have to.
I own a XPS M1530. I wanna upgrade the RAM from 2 to 4 GB..........................
View 3 Replies View RelatedSo I'm having heat issues with my m1530...but that seems to be the norm.
So I've got a Dell tech coming out to replace the mobo & fan/ heatsink.
Do you guys know if the Dell tech will remove the old thermal paste, and use some AS5 (provided by me of course) instead of the crappy Dell thermal paste?
If not, when would be the best time for me to do it? Right away, or should I let the thermal paste set before I remove, and replace it?
I'm getting ready to order a new m1530, but can't decide on Ram options. I know with 32-bit Vista, it only recognizes ~3.2GB of RAM, so would the benefit of 3.2GB Dual Channel be worth the upgrade from 3GB non-DC?
Has anyone noticed any problems with Aero when using non-DC?
I've just gone to install win 7 when I ran into a big thread about m1530 and x64 win7 here on the forum (in which there's no answer to this question).
I am interested what the differences are between x64 and x86 Windows 7 on m1530(i.e. in stability, performance, driver availability, else...).
My configuration is:
Intel core2duo 2.1GHz T8100
4 GB ram
GeForce 8600 GT
Intel 82801HEM/HBM SATA AHCI controller - says device manager (500GB hdd)
Intel PRO/ Wireless 3945ABG .....
Building an M1530 from parts and got the LED screen, Chimei part number N154C6-L02 with cable N849D.
Here is the problem; looking at the cable there is a connection for what could be an inverter/converter but I cannot find a part number from Dell or anywhere else.
Does anyone know what part this is and where I can get one? Is it the same as other Dell models with the WSXGA+ LED?
I have an XPS M1530 that's just shy of 6 months old.
Over the past 3-odd months I have begun to notice some things that I REALLY dislike about this laptop.
1. It gets UNBEARABLY hot. I'm afraid I might not be able to have kids if I use it as intended (ie: on my lap)
2. It can't play TF2, CSS or HL2 at all low settings. That's ridiculous. I suspect that may have something to do with the poor thermals.
3. Its battery life is ridiculously short. Not much of a problem in everyday life, but something that really gets to me on those >6 hour intercontinental flights.
4. The Fingerprint Application (psqltray.exe) seems to dislike Vista x64. I've caught it using up to 1,000,000K of memory.
5. The internals are of TERRIBLE quality. The heatsink offers no reassurance about thermal performance whatsoever.
6. Dell tech support is beyond incompetent. I do believe my 11-year old sister knows more about hardware problems than the 2 people I spoke to.
Can I call Dell over for a physical inspection of the laptop? I divide my time between India and Los Angeles, but most of my time is spent in LA and the laptop was bought here.
i had a XPS M1530 since Jan,2008(When first release). couple of weeks ago when there was an issue with my media buttons dell decided to change the whole system as they were not been able to fix it.
actually the light(Blue surroundings lights when once touched the media buttons) was not as brighter as they were suppose to b. when i first bought the system these lights were really brighter. but a month ago when the buttons were not working properly dell replace the whole Media Hinges Cover. i found the lights really deemed. then they again changes the hinge cover. but still the same. third times they changed the mother board, but nothing fixes the problem, i mean every times it's deemed media buttons. so they changed my whole system.
the new XPS M1530(replacement) i have received a couple of weeks. but u know guys, i was surprised to see that these media buttons r also deemed. and it was assembled in Poland where the old one was in Ireland. also i have found another changes that is, the screen light is much more brighter. something like Blueish. i don't know if it is good or bad. one of my house mate has got his old xps m1530. so i did compare just putting his one right next to my system.
they also changed hdd. my previous one was Fujitsu and this one they have put Hitachi. this hdd make little noise than previous one.
i could complain to dell and keep replacing the parts but i didn't, u know guys why, bcz this new system came along with Processor 2.5Ghz where my previous one was 2.2Ghz.
I put it on the table and started to work... At first i heard clicks from HDD. Then i downloaded HDparm and done what there were said:
"Just install HDPARM and run the "unclick.exe".
You can put a shortcut into the windows "autostart" folder to run it directly on boot"
After that clicks form hdd gone...
But today i took it on sofa and when i picked UP it i heard like scrpas clicks FROM HDD. and in vista all started to slow.... then i didn't moving it and when i moved it (picked up) again - again this....
I downloaded HD Tune and done some tests.
CANT post here picture but the graph was like if its standing its all going straight but when i picked first it falls down and vista slows down .. and then i put it back on table but when i pick up it again and starting walking slowly its started to beep clicks and etc. and again the line was fall down 3 times (to the transfer rate minimum) ...
2) This was when i was moving slowly it like walking and i heard clicks ... sounds from it and A BEEP like sound 2 times..
1) thats when i picked up it only.
HD Tune: ST9200423ASG Benchmark
Transfer Rate Minimum : 0.3 MB/sec
Transfer Rate Maximum : 78.7 MB/sec
Transfer Rate Average : 59.9 MB/sec
Access Time : 27.7 ms
Burst Rate : 73.0 MB/sec
CPU Usage : 3.7%
I now have 8 gb of ram on my xps m1530 using the A11 bios update.
I want to thank Rhodan for the idea and the original poster of the A13 bios for m1330 thread. I downloaded the a11 update and installed it. I then installed my other 4 gb sodimm and bios recognized it and windows recognizes it. this is awesome.
Kudos to Dell for listening to its ideastorm ideas and implementing the ones that really matter to us users.
So I've had my laptop a year and a half and it has always gotten very hot to the touch. Right now it is at 60 degrees C. Earlier it was up to 68 I believe. Is this normal? Also I don't ever hear a fan on and I'm not sure if it even works. Is there anyway to test this? Or am I overreacting to the temperature?
View 3 Replies View Relatedjust wondering do you have the same problems like me ? I have to turn all details on low and it looks like shi*. Really pis*ses me off that I never get more than 18 FPS.
I have the M1530 2,4GHz 8600M GT 4GB RAM, Windows XP SP3
I know that the M1530 is not a killer gaming machine but it cant be that bad or what do you think ?
Can any dell xps m1530 take 8G of memory? I see on line that you have the option to pick 2 to 4 or 4 to 8.
but if you pick the config with 4 gigs it list 4g the highest. but you can do config 8gigs and get 4, 6,8g options.
does it require a different motherboard or will a one year old 1530 work with 8gigs?
Most reports of the dead GPU problem seem to be from M1330 users with the 8400GS, has anyone had a 8600GT fail on them..?
View 10 Replies View RelatedAlright I bought a refurbished laptop for $900 and the performance has been terrific. Now i have several minor problems i like to point out to see if this is normal or not and if its not i like to have it fix.
The first picture shows the plastic (whats the name for that?) isnt flush against the frame .....
To everyone who owns/owned an M1530:
When was the last time you had your mobo/gpu/heatsink/fans replaced because of overheating? Dell is claiming to have "fixed" it by putting in new chipsets. So now I want to see when this "fix" occurred.
Ok, I have neglected my M1530 for WAY to long and it is in desperate need of reformatting. I also have not paid too much attention to the forums and what is the latest and greatest out there so I was wondering if you all could recommend which drivers I should search out before I dump my system. I have my dell drivers cd and operating system cd, but its over 2 years old. I am looking for the latest and greatest Video, Audio, anything special, etc.
Also, If there is anything cool new trick I should do to reformat, I would appreciate it. I was at one point going to put on a linux partition, but am going to skip it for now. I am planing planning on 3 partitions.
1. Media Direct (Only have used a few times, so maybe I should skip??)
2. Windows
3. Data (would like to split this on, but I think i am limited to 3 partions with media direct??)