I have Acer Travelmate 7520G (Turion TL-58) and upgraded from 2G of 667Mhz RAM to 4G of 800Mhz, however the memory is still running at 667Mhz and FSB:RAM being CPU/6. Chipset here is Ati RS690 and according to Everest it supports 800Mhz DDR2. There is no option in bios to change the RAM frequency or divider.. I have tried updating the bios with no luck.
View 5 RepliesI found a nice deal over Dell.com for this memory - yes, I know it's crazy but that was the cheapest place I found, they offered 15% off + FREE Next Business Day @ DHL, which sounds pretty good for me.
I'm going from 2x1GB DDR2 533Mhz to a 2x2GB OCZ DDR2 800Mhz@667Mhz with lifetime warranty for as low as $44 each module. I think will be great upgrade since my 2GB always wasn't enough!
I have an Aspire 7520G.
ADM Turion 64x2 1.90 Ghz.
Geforde 8400m G 256mb.
3 GB RAM.
I used the acer program ePower management and put everything on max performance.
The CPU is at 100% clockspeed. Only when i play a game, the CPU somethings drops till 80%. This causes major lag spikes for 5-8 secondes.
I got a screenshot where you can see the drops.
What causes this problem?? Is it the because my CPU is overheating? (in the picture is quite stable).
I got the latest BIOS version by the acer helpdesk.
i want to overclock my cpu and my grafic card...
I know notebook are not made for oc because they overheat very fast,but i already got a solution for it ,i modify my back off the notbook and put in another cooler.
I got no idea how to overclock because u cant make it on Bios...
Acer Aspire 7520 G
Microsoft Windows XP Professional sp3
CPU Typ Mobile DualCore AMD Turion 64 X2 TL-64, 2200 MHz (11 x 200)
2048 ram
NVIDIA GeForce 8600M GS (512 MB)
I'm writing to ask you about upgrading the laptop Acer Aspire 7520G.
It had nvidia 8400M G, which is faulty.
Question :
Is my laptop compatible with NVidia GF 9600M GT MXM II 512 MB ?
Has anybody experienced in changing videocard in acer aspire 7520g ?
My current RAM is:
1gb Corsair DDR2 667mhz (default from manufacturer) and
2gb Mushkin DDR2 800mhz
I searched through the internet that Acer 5920G can only support up to 667mhz.
The problem is, I'm planning to add 1gb more RAM, so it will be 2 x 2gb Mushkin 800mhz, since both of them will be downclocked to 667, will both of them still run in dual channel mode ?
I wanted to buy 667mhz one, buy every shop near my place says that 667mhz ram not distributed anymore and the price is quite the same.
I have a VERY short question, But it is VERY hard to find an answer on the net!
I want a WLAN card Mini PCI Express for the 7520G-604G25Bi.
Which card is 100% compatible?
It has to be a card with N-Draft.
FYI: Laptop has AMD Turion Processors.
I have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01
Bus:01 Device:04 Function:00
ERROR
Bus:01 Device:04 Function:01
ERROR
Bus:01 Device:04 Function:02
ERROR
Bus:01 Device:04 Function:03
ERROR
Bus:01 Device:04 Function:04
ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00,
SDA Standard Compliant SD Host Controller at Function 01,
Ricoh SD/MMC Host controller at Function 02,
Ricoh Memory Stick Controller at Function 03,
Ricoh xD-Picture Card Controller at function 04.
Aspire 7520G, Realtek audio installed, Logitech Z-10 USB speakers and Steelseries Siberia Neckband Headset with additional sound card (see pic).
So. When I switch off winamp, plug out speakers and plug-in my headset - its not working! The most interesting thing is when I just plug-in in the headset without sound card (just directly to the note) - it works!
I dont know why, but earlier it was working properly with this external sound regulator. And now not.
I suppose, it might be because of USB/analog switching or something similar, but I dont know..
I have a 7520g that I have installed XP onto, because I hate vista. But it refuses to install the wireless adaptor.
The model in question is a broadcom bcm94312
i bought my wife a netbook, as she specifically requested, thing is, on 3cell 3hrs are great, but it has begun to "tear" a lot in WINXP.....
background services...etc have been seen to
so i check out CPUID and lavalys.....both showing Proc working along at 800mhz....i have tried to change power profile in XP ..... and tried making a new one, but there is no way to reduce that tearing effect...... it feels a bit sluggish to me, i am going to add a 2G module (accepts Elipda 2G module from my HP DV5T) so some RAM along those lines is wha i am aiming for......
how to stop/ allow the laptop to clock on OS load....cuz the 800mhz on the netbook is unacceptable.
My Acer Aspire 7520G suddenly refused to boot, leaving blank screen only. No boot logo or anything. However, after googling around a bit, I found one thread with a solution, which is to press hard around the touchpad, and to my big surprise it did indeed work.
So does anyone know what's wrong with the computer that behaves this way? I never found the cause, and before I start disassembling the laptop, it would be nice to know what to look for. (Can't take it to the service as warranty expired a couple of months ago)
I have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01
Bus:01 Device:04 Function:00
ERROR
Bus:01 Device:04 Function:01
ERROR
Bus:01 Device:04 Function:02
ERROR
Bus:01 Device:04 Function:03
ERROR
Bus:01 Device:04 Function:04
ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00,
SDA Standard Compliant SD Host Controller at Function 01,
Ricoh SD/MMC Host controller at Function 02,
Ricoh Memory Stick Controller at Function 03,
Ricoh xD-Picture Card Controller at function 04.
i have an acer 6935G and the memory installed is 4GB with DDR3 aswell as GPU which says DDR3.but since i've been browsing the forums for quite some time,i've seen people stating that acer doesn't really support DDR3 on this machines and it acts like DDR2.How can i change it to run as DDR3 than? And how am i sure it runs as DDR2 or 3?
View 10 Replies View Relatedwhich notebook cooler prefect for Acer 6930g, as i know its intake from down vents and exsaust from side vents. i have done underclocking cpu its really worked,
View 4 Replies View RelatedI see that thread BIOS Update V1.24: 4GB RAM in 9410? was already locked (yes, I missed it by more than a year).
I'm guessing there are still users out there using their Acer Aspire 9410 laptops.
I recently purchased two 2GB DDR2 modules. They both work fine individually and I've tested using memtest86+. When I plug both modules in, the BIOS only sees 3067MB. The Phoenix BIOS in my Acer Aspire 9410-4933 is version 1.24. I would expect that the BIOS sees all 4GB.
Is there any Phoenix BIOS newer than 1.24 that I can use for my Acer Aspire 9410-4933?
I've read that there may be hidden BIOS settings and I'm wondering if anybody can point me to a URL that describes how to un-hide those settings?
Lastly: according to the aforementioned locked thread, the BIOS is the one limiting how much memory is addressable. Is there any way to hack around that?
I have an XPS Gen 2 Laptop. I know its like ancient now but after 3 years its still running pretty well. The problem is I'm getting severe fps drops in games and I realized something strange happened to my cpu.
The cpu load is going crazy because the cpu clock speed is locked at 800mhz.
I thought it was something wrong with SpeedStep but I turned that off and nothing changed. My cpu will not go past 800mhz.
Why is my cpu downclocked and what can I do to make it normal again. Dell BIOS doesn't really let u manipulate anything.'
CPU-Z shows
Core Speed: 798 MHz
Multiplier: x 6
Bus Speed: 133 Mhz
Rated FSB: 532
you can add 8gb of 800mhz ram?
whys that when you can only use 667 on the current processors that are in there?
maybe they might actually just add centrino 2 processors to the m1530?
i wouldnt mind, and i would probably buy one, as i cant be bothered waiting for the magical studio 13/16.
i quite like the m1530 design, so i hope they now add the processors and graphics card, and im buying one
I know the standard for this model is the 667Mhz DDR2, but I was curious if anyone had luck with 800Mhz memory on this model? I would like to upgrade the memory, but in case I cannot find a good deal on the 667 stuff, wondering if the 800 would work (albeit likely at the slower speed).
Also, any one get a quad-core processor working on this model? I know the T9500 is an awesome processor. I'm just curious.
Just got my 1647 set up (replacement for my 1640) and got sent an additional 4gb dimm and popped it in for a total of 8 gigs.
CPU-Z shows 8 gigs, everything works fine..The Memory tab is blank so it doesn't show what its actually running at or its timings or dual channel mode or not...Which caused me to think it wasn't running in dual channel mode..So I got everest ultimate edition and it indeed showed it was working in dual channel so I was happy..But then I noticed it reported the memory was running at 100mhz and in ddr3 terms that effectively is 800mhz...The ram should be running at a base clock of 133mhz or 1066mhz effectively. All the tabs report it as being rated at 1066 and all that registers fine..Its just the "actual clock" reports it at 100mhz instead of 133..
I thought back to the 4gb dimm I recieved..It was refurbished which made me think it was the culprit..So I did some tests. I tested each dimm individually and each time (alone and together) everest reported 100mhz (800mhz)..
So is everest to be trusted? Are both my dimms bad? Whats causing my dimms to run at 800mhz instead of 1066? There is nothing in bios to tweak so how can I change this? And let me repeat, both dimms, when installed BY THEMSELVES (so 4gb total) still report 100mhz...so it cant be the refurb dimm...
What gives?
My window index score on memory is 6.8..which is about what it was on my last machine which used the same speed ram..
Could everest be wrong?
I have a Studio 1555
I have a core 2 duo processor with 2.4ghz each core.
But for some reason speedstep works correctly and then randomly out of the blue it will throttle down to around 800Mhz and just STAY there, no matter what settings I've put, no matter if it's plugged in or not and no matter if I NEED more power.
I have a dell studio 1735, I changed my first boot disk, to an ocz Agility 3 and put windows 7 64 bits on it.
I changed the two slots of memories to an no name (compatible dell products) 4gb X 2 running at 800mhz eaches.
Put the first time I started my computer, it said it have to format the new memories before it would start windows, I accept, then these problems appears...
1- The memory was formated to 667mhz (the totality of gb still there: 8128mb of memory)
2-Many lags came (from video (streaming and on disk) and from a repeat task over a hard disk (I got two disks the other be an hybrid hdd/ssd) giving an error and closing the explorator of windows)
So I want to know if possible to reformat the memory sticks to/or put them to their native configuration of 800mhz....
Does the Dell Studio XPS 16 use ddr2 or ddr3? I am not sure, but I am going to guess ddr2 based on the 3dmark06 scores. Does anyone know for sure?
View 10 Replies View Relatedhow to knw my gpu is ddr2 or ddr3? its nvidia 9600m gt
View 3 Replies View RelatedI just checked newegg and it looks like you can get 2gb (2x1gb) for like $55? This would be for my 9300. When did prices dip this low? How much longer do you think it will last (will they rise back up?)
View 15 Replies View RelatedI was wondering is the HD 3650 in the FW DDR2 or 3?
View 3 Replies View RelatedI'm looking at this one currently
View 10 Replies View RelatedThe new MB runs with DDR3 memory but I was woundering to save money to use my existing 4GB DDR2 Modules... Is this posible?
View 3 Replies View RelatedI successfully upgrade an old laptop so that it will run well and not be too costly to upgrade either? So slow at present....
Laptop is:
acer travelmate 4502WLMi running xpsp3
Was thinking that probably the only upgrades worth considering were ram and hdd.
If this is the case what size mem and spec will work?
If the hdd is worth upgrading do I go for internal or external? and what size ?
I'm looking into a vaio fw with the following specs
P8800 cpu @ 1066Mhz fsb
4gb ddr2 ram @ 800Mhz
500gb 7200rpm HD
1gb graphics w/ 1080p screen
will the speed of the ram limit the fsb of the cpu in any way?