I have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01
Bus:01 Device:04 Function:00
ERROR
Bus:01 Device:04 Function:01
ERROR
Bus:01 Device:04 Function:02
ERROR
Bus:01 Device:04 Function:03
ERROR
Bus:01 Device:04 Function:04
ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00,
SDA Standard Compliant SD Host Controller at Function 01,
Ricoh SD/MMC Host controller at Function 02,
Ricoh Memory Stick Controller at Function 03,
Ricoh xD-Picture Card Controller at function 04.
I have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01 Bus:01 Device:04 Function:00 ERROR Bus:01 Device:04 Function:01 ERROR Bus:01 Device:04 Function:02 ERROR Bus:01 Device:04 Function:03 ERROR Bus:01 Device:04 Function:04 ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00, SDA Standard Compliant SD Host Controller at Function 01, Ricoh SD/MMC Host controller at Function 02, Ricoh Memory Stick Controller at Function 03, Ricoh xD-Picture Card Controller at function 04.
Aspire 7520G, Realtek audio installed, Logitech Z-10 USB speakers and Steelseries Siberia Neckband Headset with additional sound card (see pic).
So. When I switch off winamp, plug out speakers and plug-in my headset - its not working! The most interesting thing is when I just plug-in in the headset without sound card (just directly to the note) - it works!
I dont know why, but earlier it was working properly with this external sound regulator. And now not.
I suppose, it might be because of USB/analog switching or something similar, but I dont know..
My Acer Aspire 5101 wasn't running very fast so after the usual anti-spyware and anti-virus programs I tried the Windows Memory Diagnostic program booting from cd.
My laptop came with two sticks of 512MB DDR2 RAM. I got fails on wmats+ so I tried each stick seperately in both slots. I got the same errors for each stick in either slot.
I don't know what to do now. My laptop is out of warranty so if I want to speak to Acer technical support there's a 50p/min helpline. I thought I'd ask for advice on this forum first to see if anyone had any other advice before I end up spending a fortune on the phone.
I made a clean install of Windows 7 on my Sony VPCEB1S1E/BJ last night, mainly because the language this laptop came in was wrong and I couldn't understand anything (Home Premium, so couldn't change it either). After the install I noticed the laptop became very slow, so I reverted it using recovery discs which were supposed to reset the laptop back to factory defaults. Ok, the language went back to the original and everything was as before. But... now the laptop is very slow, especially with boot times.
I receive a lot of errors and critical errors which show up in the event lists. Event ID is usually 100, or 102-106. A few messages aboiut how some programs delayed the boot, a few about cd-rom driver delaying the boot...
I know notebook are not made for oc because they overheat very fast,but i already got a solution for it ,i modify my back off the notbook and put in another cooler.
I got no idea how to overclock because u cant make it on Bios...
Acer Aspire 7520 G
Microsoft Windows XP Professional sp3
CPU Typ Mobile DualCore AMD Turion 64 X2 TL-64, 2200 MHz (11 x 200)
I have Acer Travelmate 7520G (Turion TL-58) and upgraded from 2G of 667Mhz RAM to 4G of 800Mhz, however the memory is still running at 667Mhz and FSB:RAM being CPU/6. Chipset here is Ati RS690 and according to Everest it supports 800Mhz DDR2. There is no option in bios to change the RAM frequency or divider.. I have tried updating the bios with no luck.
Dell Inspiron M5030 is fallen down,Front part of DVD dropped.attached it,turned on the laptop. no boot,2 short beeps,error
When I turn it on,I get this error in a black page:
Check Cable Connection!
PXE-MOF:Exiting Intel PXE ROM.
Reboot and Select proper Boot device or insert Boot Media in selected Boot device and press any key
I turned it off and press f12 and changed the reboot default to Hard Drive, again 2 beeps and same black page with same errors.
Dell Inspiron M5030 is fallen down,Front part of DVD dropped.attached it,turn on the laptop. no boot,2 short beeps,error
Edit | Delete
When I turn it on,I get this error in a black page: Check Cable Connection!PXE-MOF:Exiting Intel PXE ROM.Rebot and Select proper Boot device or insert Boot Media in selected Boot device and press any keyI turned it off and press f12 and changed the reboot default to hard Drive and other option, again 2 beeps and same black page with same eroors.
My Acer Aspire 7520G suddenly refused to boot, leaving blank screen only. No boot logo or anything. However, after googling around a bit, I found one thread with a solution, which is to press hard around the touchpad, and to my big surprise it did indeed work.
So does anyone know what's wrong with the computer that behaves this way? I never found the cause, and before I start disassembling the laptop, it would be nice to know what to look for. (Can't take it to the service as warranty expired a couple of months ago)
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media.
I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled".
Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off.
I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required.
In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
2 updates keep failing: Microsoft.NET Framework Sevice pack1 Internet Explorer 8 for windows vista.
And now I get a message saying that it can't contact windows update, so i do it manually, the install starts then seems to stick and the only way I can get out of the install screen is to shut down
i have a problem with my TM8006, it first died, and after i reinstalled everything several times i keep getting blue screen errors, don't know why, it might be the harddrive, but i'm not sure. If it is the harddrive can i change it by my self?
I'm using the notebook right now, waiting for a blue screen. None so far with a single 1 gig stick. I tested both stick's by themselves no errors, as soon as I use both i get bsods left and right.
Both are Pny 667 1 gig sticks, But i was cheap and since i had a stick already, i snagged another off Ebay. I guess they weren't well matched.
I'm going to test both slots and make sure there's no errors. So i guess it's a lesson not to be to cheap and just buy in pairs.
One more thing i might try is to lower the shared video memory, i noticed that some programs are reporting to much memory allocated to video.
I have loaded Kaspersky anti virus on my computer, the computer gave me a driver alert and restarted, now the bios screen does not display at start up and the hard drive light does not come on, the only thing that seems to be work is the CPU fan.
Machine is an Aspire 9301AWSMi running XP SP2 rather than Vista.
On boot, the machine shows the ACER BIOS screen but after that the display just goes blank. Have tried to boot from the Windows XP CD and the only difference is that following the BIOS screen I then get a message saying "Windows is inspecting your hardware configuration" and then a second or 2 later, back to a blank screen. No disc or CD activity.
Is this another ACER Motherboard problem or maybe a HDD failure?
After I turn on the power, the harddisk led doesn't turn on, just the CAP and NUM led flash once. The screen doesn't turn on, even the Acer logo doesn't appear. I can hear something is turning inside the notebook, but it's definitely not the harddisk.
I wonder if I had pressed some wrong buttons, and disable the notebook.
Now when i press the power button it start and after some processing shows the following: Linpus Linux Basic Edition v9.2 b060419c [root@ localhost /]#
i dont understand this command [root@ localhost /]# and after this command cursor is blinking to write some thing.
I've try to install windows xp, i've changed BIOS priority and put cd on first place, saved changes in BIOS and restarted my laptop and here comes a problem...
It will not boot windows from cd! I' ve tried with F8, F3 etc. I know that windows cd is ok because I've tried it on my old comp few minuts ago!
I have an acer aspire 1681wlmi which has just finished its extended 3 year warranty. The problem started by freezing upon start up on a white screen then the freeze up got quicker and quicker each time i rebooted it. Now the power on starts the hd, everything flashes like normal and after 5-6 seconds the hd stops and the hd light goes out. It wont boot from cd, it tries, the cd spins then everything goes dead again. I have tried all the previously mentioned fixes mentioned on this forum like removing battery, memory etc, i even tried to dismantle the whole thing but when it got down to the motherboard i did not want to break anything and put it back together again. I havea feeling the mother board is dead....
The laptop has been working fine until yesterday...the screen froze and wouldn't let me use the mousepad/curser. I turned the machine off and rebooted, it won't reboot, reacts for about 2 seconds, screen stays black and nothing. Do you think my processor is shot or thoughts to possibly fix it?
i wan to format an acer aspire 2920. I shut down the pc and put the recovery cd in but the system still opening a windows and didnt read the CD. and i didnt saw this word "press any key to boot from CD". How do I get it to boot from the cd-rom. I went into setup to change the boot sequence to boot from cd 1st but cd isn't listed as a boot option. It has HDD, ODD, USB, PCI LAN as boot options to select from in that order.
My 17 mth computer suddenly had a blue screen with error messgae PAGE_FAULT_IN_NONPAGED_AREA ......etc it told me to push F8 to open in safe mode which I did but nothing happened! I turned the computer off and now it won't open up again. The power registers but the screen stays blank! Anyone got any suggestions or is it past hope?
I have tried to contact ACER U.K by e-mail but it won't accept my message as it says SNID number should not exceed 11 digits but it's actually only letting me put in 3 digits! I've also tried to ring but every number is coming up invalid or 'mail box full'.
I'm having getting my USB stick recognized as a bootable device (installing windows 7 onto a system that came with windows 8.1 pre-installed, no optical drive)
System: Acer E 15 (E5-571), BIOS V1.15 (UEFI)
What I've tried:-Disabled Secure Boot -Created bootable USB stick with Windows 7 iso, via 'Microsoft USB/DVD Download Tool' (on alternate Windows 7 system) -Created bootable USB stick with Windows 7 iso, via 'Rufus' (on alternate Windows 7 system) -Windows 8.1 Advanced Restart -> Boot from UEFI USB Device (No UEFI device recognized)
What worked:-Enabling 'Legacy Boot Mode': USB stick was recognized upon boot and loaded Windows Installation. HOWEVER, Windows 7 won't instal to a GPT formatted drive under Legacy Boot Mode. I've read booting in UEFI mode is the only way to get Windows 7 to install onto GPT.
What I don't want to do:-Format the drive, change drive mode to MBR to instal Windows 7. Why? Because then I'd loose the factory installation of Windows 8.1
I want to be able to boot from a USB thumb drive/stick. There is no option in the Bios setup to do this.I will have to return the system to the store - but what Acer system can I replace it with to boot from USB stick?
Aspire 5920. When I purchased it from a chain electronics store, I did not receive any OS CD/DVD or any other disks with it. Now it got to the point where it had slowed down to a crawl, I went to do a system restore (Vista Home Premium) to the earliest point which was set on 24 Aug 09, and I when it went to reboot itself it is now stuck on Start Windows Normally and if I select it, it just cycles back to Start Windows Normally after about 15 seconds. I've been doing that for the past two hours. I've hit F5 to get to a screen that allows me to choose F8 and get to safe mode and other selections and all of them take me back to Start Windows Normally and the endless cycle from hell. Of course I have no CD to boot from, so I have no choices at this point. The extremely curious thing is that I know another couple of people who bought the exact same model from the same retailer and none of them got disks. The retailer apparently told one of them that Acer doesn't ship OS disks with this model. I find that hard to believe.
I have a brand new Acer Aspire 5536. It came pre-installed with Vista which I have repalced with Windows 7. I did a clean install, first formatting the hard drive.
The boot process takes 7-10 minutes before the login screen appears. Once logged in the sysrtem appears to be working fine. I have re-instaslled multiple times (using different disks) but no matter what I try it takes an age to boot.
Could my laptop be faulty - does anyone else have Win7 running on one these?
