Dell :: 9300 No Boot After Power Plug Swap
May 14, 2009
It is now charging and all but when I try and boot all that happens is the the Caps Lock, Num Lock, and Scroll Lock lights turn on for about a second or 2 then they turn off. Also the "charging" light extinguishes when the others light. I get no beeps, fans or anything.
Now my buddy, said that he did a similar replacement on his daughters laptop and that "the board needed reprogrammed afterwords"?? I'm not sure what he means by this .....
View 4 Replies
ADVERTISEMENT
May 7, 2009
I've been researching for several days about replacing a fried motherboard in my Inspiron 9300, and I have began to wonder, if I could not just transplant it's guts into a 9400 base.
I see that 9300 Mobo's and base are practically the same cost as 9400 mobos and base.
Having a 9400 Mobo would allow me upgrades in the future that my 9300 would not and that idea makes me happy.
I'm hoping someone might be able to answer me having done this themselves .....
View 4 Replies
View Related
Nov 14, 2007
I'm trying to repair a 9300 with a radeon x300 video card in it - after the LCD panel died.
I've tried two panels to replace it, a WUXGA and a WXGA both from a 9400 - both panels are tested, and known to be absolutely working, as are the inverters.
In the 9300, the LCDs work, but the backlight doesn't come on, so they are effectively useless. I've tried them with all combinations of inverters, the ones specifically for those screens, then swapped around, and then changed for the original 9300 WUXGA inverter - nothing makes any difference, even though all parts are tested and working in a 9400.
The machine works fine with an external monitor, and in-a-sense works fine with the LCD panels - the output is working fine both ways, just not the backlight.
I've just never heard of a backlight problem on the card, only ever the inverter or backlight. The fact that the card was working fine before the old panel died also makes me doubt a problem there (and the old panel was an LCD problem, not a backlight problem).
Unfortunately, an LCD panel with no backlight at all is unusable, as it's almost impossible to see anything at all - much worse than a dim backlight. You have to hold it at the right angle, in the right lighting conditions, and squint
I've just tried flashing to the latest A05 system bios, and the latest ATI video bios from Dell, and that hasn't helped. Is there some good reason that 9400 panels aren't compatible with a 9300, or have I got a video card with dead backlight output?
The video card is the only thing I can think of, but it was working fine before the old panel died, and I've never heard of symptoms like this.
I don't have a working panel from a 9300 to test with, and can't afford to risk buying another panel, also replacement cards for the 9300 are like hens teeth.
View 10 Replies
View Related
Oct 12, 2009
It seems that the the end of the power plug (the center pin) is broken.
I have a HP 8710p, and this AC adapter ---> [url]
What I'm asking for is a picture, or a rough explanation of how LONG is the gold'ish connector (the center pin) inside that plug.
I'm asking because I want to find out whether it's the motherboard power connector that's broken or if the center pin inside the DC power plug somehow broke and doesn't provide the power..
View 9 Replies
View Related
Jul 16, 2009
My power plug on my laptop finally gave out. I cant find any articles on taking a VGN-AW series laptop apart. This is my second AW series which is a VGN-AW120J. I know theirs 2 different plugs for them. The on I have doesn't have a enclosure inside the plug and has 2 prongs that touch the pin in the power adapter.
View 8 Replies
View Related
Apr 17, 2014
I've had my laptop for a little bit under 2 months, so these are the things I have noticed.
Issue number 1: When you plug in the power cord into the computer, the screen freezes on what it is currently on. I noticed this issue because occasionally when I plug in my power cord, and try to use the mousepad to select something, the mouse pointer is gone! I have to unplug-replug the power cable to get the mouse pointer to show again. It seems to have to do with the screen
Issue number 2: when I carry my E7440 around in my bad, or have it shut for long periods of time >3 hours (I just simply close the lid), the computer will SHUT DOWN. The thing will shut down completly, even though I simply closed the lid! At first I thought it was just going into hibernate, so I disabled hibernate in my power settings. But nope, even when the computer is asleep, it will occasionally shut it self down for no reason at all.
Just now, I closed the lid on my laptop, and put in in my bag, then walked to my office about 10 minutes away. When I sat down at my desk and opened my laptop, to my surprise, it had shut down by itself! All of my open windows, browsers, and applications were closed, and upon opening chrome and microsoft word, I was greeted by "your browser did not shut down correctly" and "microsoft word has recovered files". This points to the conclusion that it was not hibernates fault, but instead a issue with the laptop itself shutting down when it is put in sleep. This issue needs to be rectified immediately if it is a widespread issue.
Issue number three: When the computer comes back from hibernate or sleep, the computer is very very sluggish, even when plugged in. It is sluggish forever, OR until the power plan is set from whatever it is to "high performance". upon switching to the previous powerplan from high performance, the swiftness of the system is restored. This indicates to me that the system is throttling itself after it resumes from hibernation, why. This needs to be fixed; many people (myself included) just thought that the system itself was slow and underpowered, not realizing that it was just throttling itself when it emerged from sleep or hibernate.
View 10 Replies
View Related
Jan 14, 2015
I bought this inspiron 15r 5521. Its approx 2 year old. There was warning in battery status in the PC checkup. Few days afterwards the laptop did not start up. I searched and did a hard reset..BUT when i shut it down or hibernate . again its like dead and i have to plug in the power cord for 20 min and do a hard reset to turn it on . It also happens that if i shut down while the power cord is plugged and i take it out and again plug it , it stops charging..(again need a hard reset).
View 1 Replies
View Related
Sep 3, 2014
My X200 (three or four years old) has a new battery (few months only) and has never had any power issue. Suddenly since last week it will not operate without the power supply plug in. Battery is showing 100% and condition excellent, but the second I remove/unpower the power supply plug, the system crashes. On restart with power supply attached, the battery indicator shows 1%! It then gradually creeps up to 4% and after maybe 5 mins it leaps back up to 100%.
View 4 Replies
View Related
Jan 10, 2015
What is the exact plug size of Acer Aspire 5755g power socket?
I lost my old charger and I need to buy a new one but I want to make sure that I but the correct one.
View 2 Replies
View Related
Mar 4, 2009
I have a Inspiron 9300 notebook and when I push the power button the system will show 3 lights (caps lock, num lock, and scroll lock) then shuts off in 2-3 seconds. I did notice the scroll lock stays lit just a little longer.
I have removed all components including battery and running straight from power adaptor (which is good) and still same issue. There are no beep codes for missing memory. I walked through Dell's online process but it did not really indicate what the issue was .....
View 3 Replies
View Related
Jan 4, 2008
I've been working feverishly with the search funtion and have seen many with this issue but NO ONE has posted a follow up to what causes this.
I had a thread below about questioning if a bad battery fried my mobo but am starting a new one. [url]
So........if you have dealt with this and konw the cause please speak up for the good of the forums!
I've always seen such good participation in the forum I'm totally SHOCKED that nobody had posted follow ups to this!
View 12 Replies
View Related
Aug 16, 2009
My 9300 just stopped working and the power supply blinks when plugged in to the laptop but is constant when not connected to the laptop. I'm thinking it's not the power supply because of this.
I have trier removing the battery, holding in the power for 30 seconds, powering up with the battery out etc. I'm don't think it is the battery either
I have also searched the forum but can't find anything that is similar. I did see a page on the net that said it may be a short on the motherboard but it was talking about dells.
It is sitting beside my bed and last night every 10 seconds it made 4 light clicking sounds that lasted in total about 1 second.
View 7 Replies
View Related
Sep 11, 2009
I'd like to ask if anyone knows how to boot from a 2nd hard drive installed in the modular bay.
I've searched prior to posting but I couldn't find a definite answer.
The manual says to choose the option in bios but there is no such option.
View 15 Replies
View Related
Apr 18, 2013
Dell Inspiron 9300:
Part Number: PP14l
The battery on it flashes 3 out of 5 lights but not in order. The two end lights and the middle light comes in. They flash in unison 3 times before turning off. Anyway I plugged in 2 different chargers to the computer and the battery light on the pc flashes 3 or 4 orange and then 1 green. Then it resumes the light cycle just mentioned. The computer gives ZERO response to this whatsoever. If I unplug the ac adapter, the computer turns on for four seconds. No hdd noise, no fans, just a green power light ONLY. Not sure how to fix this or what it is, but nobody in the forums or on youtube or google seem to have solutions or even the same issue. I have tried reseating both ram, unplugging the wifi chip, dvd drive, doing the 20 second power drain without battery hooked up. All the same responses, just nothing....
View 10 Replies
View Related
Jun 19, 2009
I recently had my CD/dvdrw drive crash. It plays DVDs but not CDs and I need the CD portion to work.
Unfortunately I think I'm going to order one from dell and its going to take 5 business days (7 days cause of the weekend) and I need to boot up an operating system via CD for work.
My bios says that it can be started from a USB storage device, but my external CD drive doesn't even seem like its powered up when I restart.
In my bios, I have the boot option set to USB storage device and have it set as priority over any other boot option. I just paid for this external drive today, and things are still looking grim.
View 3 Replies
View Related
May 28, 2010
A friend gave me his dv1000/ dv1515cl to fix, I believe it's the mobo but not sure .when I plug in ac adapter wont boot but light shows batt. charging .If I unplug ac, remove batt. then I reinstall batt. all tights come on but when I open laptop it shuts off.
View 3 Replies
View Related
Apr 8, 2009
using my unmodded 9300 and shut down for the night. This morning, when I tried to reboot, the process would get to the Windows splash screen, then flash a blue screen so fast I couldn't read it, then go to a black screen that gave me 5 options to start windows. No matter which one I pick, the same process happens again.
I videotaped the blue screen and it reads: a problem has been detected and windows has shut down to prevent damage to my computer unmountable_boot_volume and then it gives me unhelpful advice on how to fix the problem.
I ran the Pre boot system assessment and all items passed. Then I ran the Dell Diagnostic Utility for "unable to boot O/S" with the following results: HD Read Test error: 00F0:0244 and HD Verify Test error: 00F0:1A44. Both of these were on sectors in the middle of the volume and I canceled both tests after about 10 errors. All other memory, graphics, and HD tests passed.
I tried booting from the XP CD and repairing from the CD with no change. I ran chkdsk /p and it found one or more errors on the volume.
bootcfg /list gives me: there are currently no boot entries available to display.
What are my best options on trying to recover this without losing data? I have a fairly recent backup, but would like to try to save what's on the HD. Parallel install? What is fixboot used for?
Dell lists my drive as: M7601 Hard Drive, 60GB, 9.5MM, 7.2K Hitachi, Ibm Moraga
What is the drive of choice to replace this if I need to?
View 15 Replies
View Related
Sep 18, 2008
my acer aspire 9300 switched off on me tonight, the power button lights up and i can feel air from the side heat exhaust, but nothing eles,and the same thing happens just on battery without the power lead plugged in.
View 10 Replies
View Related
Dec 1, 2009
I have an inspiron 9300 with 100 GB HDD. Recently I had a huge malware or even virus that slowed down my computer tremendously.
I took it to geeksquad and they where able to remove it, but it still ran a lot slower than I ever remembered.
View 6 Replies
View Related
Mar 13, 2013
My xps fails to power on, here's a quick history of the laptop, couple of months ago i decided to try fix my dc jack issue, it would only charge holding cable a certain way, replaced the jack but my soldering wasnt good enough so bought a replacement MB and installed.
this lasted around 2 weeks, laptop shut down after battery had ran down even though connected to ac, looked at transformer on lead and noticed power light was not on, bought replacement charger and connected immediatley light on lead started flashing indicating a short on the mb (i think), tried 2 different chargers same result
bought another mb that was fully tested before shipping, installed, when connecting ac the battery flashes orange 3 times then green and continues this cycle, from what i read think this is only to say the battery is bad.
however the laptop doesnt power up tried it with without battery and did the stat drain technique of holding power button for 60 secs etc.
Basically when switching on the power on light comes on for maybe 3-5 secs and goes off again without any fans etc even begining to boot, if i hold the fn key and power it lights the 3 leds on the left, 9, numlock and i forget the symbol on the other led...
could it be the cpu? though it sounds as if the laptiop isnt even getting to stage of checking for all hardware?
View 8 Replies
View Related
Feb 15, 2013
So I've been having some trouble for a while with this thing, when it goes into standby or is starting up often it will do this thing where no lights come on at all, including the power button, all I hear is the fan whirl at top speed. That's it.
Sometimes if I let it sit for a day and try it again, it boots no problem. Sometimes I have to remove the battery, press Fn for a while, and then unplug power and it will boot. Sometimes removing the Flee power by holding down the power button after everything, ac adapter and battery, are removed. But this time nothing is working.
This thing is not even two years old, and I am getting further and further discouraged by the Dell brand. I have always had great sucess with my work computer's being Dell so thought I would go that route for my personal. But alas I've read numerous things with this type of laptop having fan/video issues though nothing sounds like my problem.
All it does is spin it's fan when the power button is pressed. It got into this state when the screen was closed and it was forced into standby. It would not come out of standby, and would not shutdown by holding the power button. Had to removed battery and ac to get it to shut down. It has yet to come back.
View 12 Replies
View Related
Sep 22, 2009
My D600 will not boot up unless the power cord is plugged in. Is there some switch that I hit by mistake? Can this be corrected?
I guess basically it doesn't work on the battery unless it is plugged in but the power shows 100 % for the battery
View 4 Replies
View Related
Feb 5, 2013
My Dell Inspiron 15 will not boot up. Started randomly shutting down over a week period. Would also display a plaid screen which would require a hard shut down by me. I was trying to run Dell diagnostics on it and noted that the video card failed, but it could not complete the diagnostic without shutting down. Now the power supply light blinks on and off in a 10 second interval. It acts like it has no power, but I know the battery was charged.
View 1 Replies
View Related
Mar 10, 2010
The laptop wouldn't boot. I took the keyboard out to see if I could swab-dry any water, but couldn't really find any in there.
I lightly sprayed around with compressed air and left the laptop open with the keyboard out to try and let it dry out for a few hours, but no dice...still wouldn't boot.
I thought maybe via cell phone logic, it might work again after 24 hours or so. It's been almost three days now and it still won't boot, so I'm pretty sure I fried something. Here's the error code it's giving me .....
View 4 Replies
View Related
Jan 26, 2015
I have an E5430 that when the power button is pressed will not post every time. It is random. I get the power light only. Holding the power button down until it clicks off and pressing it again on the sixth or 19th time it will finally light off and post and head into boot. I have run the full diagnostics and no problems are found. The diagnostic finds no problems so I am wondering if this is a power button problem or something not tied to the MB. The same thing occurs with different batteries and power adapters.
View 1 Replies
View Related
Dec 30, 2014
my acer just went black i can power off and on but windows doesn't boot up just the black screen and the cursor arrow showing
View 4 Replies
View Related
Sep 25, 2014
I have an aspire 5517 that will not boot up the power light comes on but nothing else happens. I've tried attaching an external monitor but it still won't work. All my stuff is on this computer and I need to at least back it up.
View 4 Replies
View Related
Dec 17, 2014
I want to use my laptop mostly in a docking station with the screen closed, but that makes the power button inaccessible. Is it possible to boot the system on usb or power event? I see no option for it in the bios.
View 4 Replies
View Related
Aug 7, 2013
I'm trying to install Ubuntu on an e6530. I changed a BIOS boot setting from Legacy to UEFI. Now the laptop doesn't even show me a BIOS screen at startup. The screen is backlit, so power is on, but shows nothing. The drive light flickers a few times, but no matter how long I wait, nothing appears.
I can't even switch it back to Legacy because I can't get into the BIOS. Hitting F12 after power on does nothing. Is there some way to get it back to Legacy mode? Or simply reset the BIOS to default settings?
View 4 Replies
View Related
Sep 28, 2009
I have just 2 years this acer laptop and i was till now happy.
Symptoms:
press power on
notebook turn on
fan cool up
power diod light
hdd diod light
fan cool down
power diod now blink &
hdd dioid now blink synchronized with the power diod
Nothing happend, black screen and cpu litlle heat. The state is very similiar to standby state with closed lcd cover.
I just try another
ram, cpu, charger, and still the same result.
Now i have all spare parts disassembled and i only test the MB+CPU+RAM+COLLER + POWER AC ...
View 15 Replies
View Related
