Dell :: 9300 Gut Swap / Transplant Into 9400 Base
May 7, 2009
I've been researching for several days about replacing a fried motherboard in my Inspiron 9300, and I have began to wonder, if I could not just transplant it's guts into a 9400 base.
I see that 9300 Mobo's and base are practically the same cost as 9400 mobos and base.
Having a 9400 Mobo would allow me upgrades in the future that my 9300 would not and that idea makes me happy.
I'm hoping someone might be able to answer me having done this themselves .....
View 4 Replies
ADVERTISEMENT
Nov 14, 2007
I'm trying to repair a 9300 with a radeon x300 video card in it - after the LCD panel died.
I've tried two panels to replace it, a WUXGA and a WXGA both from a 9400 - both panels are tested, and known to be absolutely working, as are the inverters.
In the 9300, the LCDs work, but the backlight doesn't come on, so they are effectively useless. I've tried them with all combinations of inverters, the ones specifically for those screens, then swapped around, and then changed for the original 9300 WUXGA inverter - nothing makes any difference, even though all parts are tested and working in a 9400.
The machine works fine with an external monitor, and in-a-sense works fine with the LCD panels - the output is working fine both ways, just not the backlight.
I've just never heard of a backlight problem on the card, only ever the inverter or backlight. The fact that the card was working fine before the old panel died also makes me doubt a problem there (and the old panel was an LCD problem, not a backlight problem).
Unfortunately, an LCD panel with no backlight at all is unusable, as it's almost impossible to see anything at all - much worse than a dim backlight. You have to hold it at the right angle, in the right lighting conditions, and squint
I've just tried flashing to the latest A05 system bios, and the latest ATI video bios from Dell, and that hasn't helped. Is there some good reason that 9400 panels aren't compatible with a 9300, or have I got a video card with dead backlight output?
The video card is the only thing I can think of, but it was working fine before the old panel died, and I've never heard of symptoms like this.
I don't have a working panel from a 9300 to test with, and can't afford to risk buying another panel, also replacement cards for the 9300 are like hens teeth.
View 10 Replies
View Related
Aug 12, 2008
My Inspiron 9400/E1705 case is getting a little banged up and I was wondering if it's possible to use a M1705 case (bezel, palmrest, base, etc). as a replacement.
View 10 Replies
View Related
May 14, 2009
It is now charging and all but when I try and boot all that happens is the the Caps Lock, Num Lock, and Scroll Lock lights turn on for about a second or 2 then they turn off. Also the "charging" light extinguishes when the others light. I get no beeps, fans or anything.
Now my buddy, said that he did a similar replacement on his daughters laptop and that "the board needed reprogrammed afterwords"?? I'm not sure what he means by this .....
View 4 Replies
View Related
Apr 24, 2009
I am thinking of buying a Vostro 1320 but on my searching the only technical manual they have on the site (support.dell.com) it shows that Vostro 1320 and Vostro 1520 use Nvidia 9400 GS video card...
So does anyone know which is it ...on configuring options I only see Nvidia 9300 GS option as dedicated video card.
I don't want to buy one and one month from now they fix the notebook with 9400 GS video card
View 5 Replies
View Related
Apr 15, 2010
I got my XPS 16 a few days ago (was going to hold out for a possible GPU update, but found a great deal at the outlet with the rgb-led, and couldn't wait any longer , and I'm going to be traveling a lot with it, so I'd prefer the 6-cell with it's lower profile. Does anyone have a new 6-cell that they want to trade for a brand new 9-cell?
View 9 Replies
View Related
Jan 11, 2009
I have a XPS 1530 with the 128mb 8400gs GPU.
I've come across a MB with the 256mb 8600gt and would like to swap them out.
Does anyone know where I can find instructions on how to take apart my laptop?
View 3 Replies
View Related
Aug 5, 2009
So Dell has ordered me my replacement Studio 1555 for my current Dell 1535 as it has given me so many problems and still is, as I have explained in previous posts.
I am receiving it on the 14th of August and a courier is coming to take the old one away on the 17th.. I have those days to transfer all my data over, but I have a dilemma.
View 4 Replies
View Related
Oct 31, 2009
I recently had the Nvidia GPU failure on my XPS 1330 that a lot of people seem to get after 1.5 years of owning the laptop. Dell came out the next day and swapped the motherboard for a different one.
The only thing is, the motherboard they put in is a Rev:A00 which I assume is the very first revision? Not sure what I had in before but I'm noticing that the laptop is running very hot when just idling.
My CPU in an Intel T7500.
I am running Speedfan and even though CPU is very low, Temp1 is reporting 72C. Is this normal or is the laptop running hotter than it should? .....
View 7 Replies
View Related
Mar 24, 2009
I have three of these in my system's device manager. All three have the little yellow exclamation point on top of the question mark.
View 5 Replies
View Related
Jan 23, 2010
i have a xps m1730 with a t7500 specs in the sig after buying a few pu hungry games i realized that something had to be done so can i replace an x9000 to replace my t7500?
View 9 Replies
View Related
Jul 13, 2009
I had a major car accident and my m6300 is partialy destroyed.
I already called Dell and i have the Accidental Cover.
What do you guys think i will get to replace the m6300?
IT had 4gb ddr2, FX1600 Quadro, T7500 etc.
View 15 Replies
View Related
Dec 11, 2008
I recently received my Dell Studio 1535 after my motherboard on my inspiron 9100 fried. The lcd screen on the 9100 is much better (1680x1050) than the 1535 (1280x800), also i hate glossy screens. After reading this thread
[apparently i cannot post links yet, just search "LCD Swap m1530" in this site and you'll get it right away.]
I was hopeful that i would be able to swap out the 1535 screen and put in the screen from the 9100. I got both successfully removed, but kinda got stuck with the inverters and all that stuff, and got scared because i don't want to break anything. The thing that confused me the most was that the 1535 lcd plugged TWO things (power i think?) directly into the inverter, whereas the 9100 has only 1 thing that plugs directly into its inverter. It seems pretty clear that the original inverter has to be the one the computer uses based on all my googling of this subject, but how can i do that if it doesn't plug into the inverter the same way? can someone please offer me some help in this? i would have like to have contacted the original poster of the thread i linked, but of course, no contact information was available in his profile I may post pictures if i decide to take it all apart again. At the very least, can someone confirm or deny that it would be possible to make this swap? i will be very disappointed if i'm stuck with this low res screen forever...
View 10 Replies
View Related
Mar 16, 2010
I am in the process of swaping out my display from the CCFL to a LED RGB display and seem to be having a little trouble.
I purchased the replacement display with a new cable which eliminates the CCFL inverter.
It appears that is all I need to make this happen since no terminals are left without a connection.
The display comes on as expected when the machine is turned on. Its starts with a white screen at full bright then shows the Dell logo. Proceeds on to display the Windows 7 booting, but goes black when the login window should appear. Basically the backlighting gets turned off since I can see the login window, but not enough to work with. If I put the machine to sleep and wake it back up, I see the login as the screen is now a full bright.
Once logged in, I am not able to adjust brightness. Dimming with the FN-arrow keys or display preferences does not have any effect. Basically, nothing I do will allow me to dim the display.
I have tried all of the following:
1. Uninstall and reinstall the ATI display drivers
2. Reflashing the BIOS
3. Clearing CMOS
4. Uninstall and reinstall Dell's System Command
5. See if windows could find a better display driver (nope)
I am running Windows 7 Ultimate 64 bit and the machine has the ATI FirePro M7740.
View 10 Replies
View Related
Oct 3, 2008
has anyone tried/considered/imagined swapping a 13.3" LCD onto a 1210xps?
does anyone know if the 1330 LCD connector is the same?
i know it wouldnt look pretty but id be prepared to cut and paste the bezel as necessary since the laptop wouldnt leave my room
View 10 Replies
View Related
Jan 15, 2009
Can I swap non-Back-lit keyboard for Back-lit Keyboard?
There are some very nice systems @ outlet, but w/o Back-lit Keyboard
View 10 Replies
View Related
Dec 25, 2009
First off, hope everyone is having a great time during the holidays and lets not forget our fellow soldiers still deployed.
So I received my replacement on the 21st with T9800 but they are sending me another replacement with the QX9300 processor.
Scenario, lets say they decide to give me the 260's SLI instead of the 280's SLI (which is what they gave me in this replacement and this is dellienware)...
Could I take the 280's in here and put them in the 2nd replacement, obviously put the the 260's in here and return it like that?
So in short, I want to take these 280s out and put them in the new replacement. Take those 260s out and put them in this one and send it back to dell.
Any input would be great
View 3 Replies
View Related
Apr 13, 2010
Does anyone know if the blu-ray burner that is used in the XPS 16 can be used as a direct swap in the studio 15?
The reason I am asking is because I have a 16 with the blu-ray burner but the xps 16 is a bit bulky. I still need equivalent power and multi-media capabilities but the 15 is almost a pound lighter and lends to a little more portability.
I am considering purchasing the studio 15 but can't justify the costs of adding the blu-ray. I got my xps 16 with blu-ray for a steal and I can't duplicate those kind of savings with the changes recently made to EPP.
Ideally, I would like to swap the dvd drive and throw it into the 16 in addition to adding the blu-ray to the 15.
Thanks in advance!
View 8 Replies
View Related
Mar 15, 2010
This is a repost of a thread I posted on tabletpcreview's forums. It seems like nobody there knows or the forum is on its way out- almost 100 views with no replies.
So the story is that I'm getting tired of plugging in 4-5 wires every time I go to class or want to study away from home, and a docking station would solve this problem. Unfortunately, the official XT2 mediabase that Dell support wants me to buy is $270. That's almost 25% the cost of this machine! (Part number H266H) There's also another part on Dell.com that might be $199. Either way, that's a lot of money for a pretty basic port replicator.
The other thing is that when I google "XT2 mediabase", the first hit is a Dell PDF of a manual for the XT2 mediabase. The part number indicated there is PR12S. However, PR12S is the part number for the XT mediabase as well! The PR12S can be ordered online for anywhere between $20-80, so I'd much rather buy it, if it works.
Can someone confirm (ie you own an XT2 and the PR12S or have access to these two parts) whether the XT2 can work mostly flawlessly with the PR12S? I can deal with bypassing an error message, but I need the ports to work. Mainly, the DVI, VGA, ethernet, USB, and audio.
View 9 Replies
View Related
Mar 10, 2009
Dell say to remove battery which I did. Then to loosen the M2.5 x 5 mm captured screw (what is that?) Is that the thing that is on right side and is in the "cutout" of the media bay and ejects when
pushed (not the media bay).
When upside I see a hole on the right side and about half way up. And the last step is to slide the cover away (I am assuming that
I remove 5 screws on the cover itself (the 4 on the left and one in the center).
View 6 Replies
View Related
Oct 24, 2009
Today I upgraded from Windows Vista Home Premium 64-bit to Windows 7 Home Premium 64-bit and all of my drivers were found without me needing to install anything except for one. In the device manager I have an exclamation by 'Base System Device
View 3 Replies
View Related
Jan 25, 2009
i'm going to buy one is it worth to buy base on the quality?
dell Latitude E6400 $1,663
* • Intel® Core™ 2 Duo P8600 (2.40GHz, 3M L2 Cache, 1066MHz FSB)
* • Genuine Windows Vista® Business 64-BIT SP1, With media
* • 3 Year Limited Warranty and 3 Year Mail-in Service
* • 14.1" UltraSharp™ WXGA+ (1440x900) LED Display - Brush Metal Black
* • NVIDIA Quadro NVS 160M With Express Card
* • 4.0GB, DDR2-800 SDRAM, 2 DIMMS
* • Internal English Backlit Keyboard
* • No Intel® vPro™ Secure Advanced Hardware Enabled Systems Management
* • Integrated Webcam with digital microphone
* • 250GB Hard Drive, 7200RPM with Free Fall Sensor
* • 8X DVD+/-RW w/Roxio and Cyberlink PowerDVD™
* • Intel® WiFi Link 5300 802.11a/g/n Draft Mini Card
* • Dell Wireless® 370 Bluetooth Module
* • No Modem
View 10 Replies
View Related
Jan 20, 2015
I installed another version of windows for my Dell XPS 14 but I can not find the base system device anywhere.Â
View 1 Replies
View Related
Dec 19, 2009
I have just received a refurb E6500 from the Dell outlet and felt as if it wouldn't be powerful enough for engineering (found an M4400 on the outlet a day after I bought the E6500 that would have fit my budget ).
So after reading some reviews and looking at some pictures I have decided to do a motherboard swap with an M4400 (and if everything works out make $60 from it all too!)
View 6 Replies
View Related
Jan 29, 2010
I completed the swap. powered up notebook, then no bios screen showed, screen had pixels all around it and garbled lines and got progressively brighter, then all of the sudden windows log on screen appeared. Normally I would not care, but I want to install Windows 7, I cannot do this if i cannot access the BIOS to change the boot sequence.
View 15 Replies
View Related
Jun 13, 2009
If I got a different Studio 1555 could I just swap the harddrives? Cuz I've already spent like 50 hours setting this one up with programs and files and settings etc.
View 5 Replies
View Related
Apr 22, 2010
I have to send back my studio XPS 1645 the thing is I have a Bluray drive in the system but the original configuration is a DVD slot load drive.
I would like to take the bluray drive out and put the original slot load drive back in (a dell tech did this for me last time) I was wondering if anyone knows of a guide or a wants to walk me through the process of doing a drive replacement
View 5 Replies
View Related
Jan 24, 2010
So dell didn't upgrade my screen when they replaced my lid today and still interested in buy a LED WXGA for my lappy
So I found a couple screens for the 1340 on Ebay but ... not sure on a couple of things:
I have a Arctic White Lid with a 2MP webcam and ccfl screen, is the current led screen or the one in the m1330 is compatible with my lid ?
View 7 Replies
View Related
Feb 15, 2008
Id like to swap the DVD drive for a Blu-Ray drive from another XPS M1530. I can not find any documentation on the drive swap.
View 13 Replies
View Related
Jan 11, 2009
It is probably a little to early to ask, but does anyone know if the Backlit Keyboard and Trackpad from the Studio XPS can swap into the regular XPS M series?
Even if the backlighting didn't work, my main gripe is the silver keyboard, which is difficult to read under airplane lighting. Black keyboard with white fonts are much better.
View 3 Replies
View Related
