So Dell has ordered me my replacement Studio 1555 for my current Dell 1535 as it has given me so many problems and still is, as I have explained in previous posts.
I am receiving it on the 14th of August and a courier is coming to take the old one away on the 17th.. I have those days to transfer all my data over, but I have a dilemma.
I heard some crackling from my hard drive (presumably) and then all the hard drive functions stopped. I could move the mouse but opening files, folders etc. wasn't happening.
So it seems the HD just stopped working. I had to force reboot and after that all was fine again.
I'd like to make an image/clone of the hard drive in case I need to exchange it to a new one. Can someone point me to a good preferably free program that does the job. I have Vista 64bit OS and a 250GB HD that is some basic model that Dell ship
trying to clone my hard drive.could some of you take a look at this picture and tell me if i have done this correctly ie will my c partion be able to boot ok,
View 10 Replies View RelatedI've got an HDX 16t due to ship next week (if those chinese factory workers aren't slacking off! ) and I plan on replacing the 5400 RPM HD with a 7200 RPM HD.
What's the best way to accomplish this hard drive switch? I figured I'd just install Vista and the required drivers on the new hard drive but I've read that some people clone the existing hard drive onto the new hard drive.
While that sounds easier will it result in a reliable install?
Is there any way i can clone the stock hdd on my y510p to an ssd without losing one key recovery?
View 9 Replies View RelatedI have an acer aspire E1-571, Its a nice little unit, how ever, the 500g hdd in it has failed, it wont even clone, just wont do anything. I bought it used about 6 month ago, it wouldnt let me run recovery discs off, I installed a new hdd and borrowed a copy of w8 thinkin it would activate it, but no, it wont activate, The edition that was on was w8.1, what can i do to get it up n running as it was, i dont want to buy a new key for it, i like w8 and would like that back on, i have ubuntu installed as a temp measure.
View 1 Replies View Relatedproper sequence of steps to successfully clone my existing HDD to the 850 Pro SSD.
Â
I am most curious as to what bios settings needed to be made before, during, or after the cloning process (AHCI?)
Â
I purchased a USB 3.0 to SATA cable to work with the process but don't know if I take the old drive out first and connect it to the cable, or connect the SSD to the cable and start the process.
The only reason I purchased my xps m1710Â is that I thought it was the top of the range model at the time, now all I want to do is replace the hd but at the same time retain all the functionality of the hidden restore partition and the media centre partition. You would expect Dell would make this easy for me as the owner and as Dell market themselves as providing user friendly IT solutions.
I have tried using trueimage to clone the drive but when trying the new drive on boot up it gets to the Dell 'blue bar' then freezes. I have tried copying partition by partition but this is even less successful.
I have tried restoring the restore 'ghost' image to the new hard drive but symantec ghost reports incompatibilities with the image file.
I am upgrading my original Samsung hd (SATA) to a new hd and would like to keep the hidden partition and mediacentre partition as my original hd. I have a new SATA hd which is currently connected in a USB enclosure. I am not a hd or filesystem expert and don't want to spend a year studying the goodells website.
I am selling my 160gb hitachi hdd that came with my alubook. thinking of upgrading to another hitachi drive, either the 320gb 5k500.b or 320gb 7k320 drive. what are your thoughts? i want performance but at the same time a very quiet and cool operating drive. anyway, how do i wipe my current hard disk clean before i sell it off? the next owner is also a mac user. is there any particular thing i need to do so he wont have problems installing os x? also, what do i do to load os x to my new hard disk? i know i need to run the installer from the dvd. do i need to format it first? if so, how? and..is there a way i can clone my current hard disk instead of going thru the hassle of reinstalling everything?
View 10 Replies View RelatedI recently bought an ideapad y510p. It came with win8 pre-installed and I don't have any recovery CDs. I plan to play around with linux on this laptop, but don't want to lose win8. So before I potentially reformat everything away, I'm thinking of making a clone copy of my hard-disk to an external USB drive. The general plan is like this,
Â
1. make copy of laptop HDD to external usb drive
2. muck around with linux - and stupidly reformat everything in the process
3. get fed up with linux and want to go back to windows
4. copy back data from external usb driver to latop HDD
5. return to comfort of win8
Â
Will using this tool (clonezilla) work in the above scenario? [URL] ...
Â
My intent with the backup, is that after I "restore" things, the "one key recovery" button should continue to work as before.
Two and a half year old Inspiron 5110 with Win 7 Home Premium. Â Cloned the internal drive using Easeus. Â Set the BIOS to USB in number one position, but this laptop won't boot from the external drive. Â Is this laptop bootable via a USB platter drive or a thumb drive? Also, can the recovery partition be used to repair Win 7 Â or is the recovery partition only to format the drive and install software the way it was when new ?
View 4 Replies View RelatedI got my XPS 16 a few days ago (was going to hold out for a possible GPU update, but found a great deal at the outlet with the rgb-led, and couldn't wait any longer , and I'm going to be traveling a lot with it, so I'd prefer the 6-cell with it's lower profile. Does anyone have a new 6-cell that they want to trade for a brand new 9-cell?
View 9 Replies View RelatedI have a XPS 1530 with the 128mb 8400gs GPU.
I've come across a MB with the 256mb 8600gt and would like to swap them out.
Does anyone know where I can find instructions on how to take apart my laptop?
I recently had the Nvidia GPU failure on my XPS 1330 that a lot of people seem to get after 1.5 years of owning the laptop. Dell came out the next day and swapped the motherboard for a different one.
The only thing is, the motherboard they put in is a Rev:A00 which I assume is the very first revision? Not sure what I had in before but I'm noticing that the laptop is running very hot when just idling.
My CPU in an Intel T7500.
I am running Speedfan and even though CPU is very low, Temp1 is reporting 72C. Is this normal or is the laptop running hotter than it should? .....
I gained a lot of information from the 5315 CPU Upgrade Thread. I'd particularly like to thank BigOzone, Hoggie and Quilty997. There are many others but information from the above formed the basis of my upgrade.
Other information I've collected from other parts in the forum.
The specification of the laptop was as follows.
Acer Aspire 5315
Celeron 550 2.0Ghz (eek)
1gb of Ram
Vista Home Basic (double eek)
Atheros Wireless Card
80Gb Toshiba Hard Disk
The new Specification is.
Core2Duo T7500 2.2Ghz 800 Mhz Front Side Bus 4Mb Cache
3Gb of Crucial Ram
Vista Home Basic (No Choice At the Minute)
Intel 4965 AGN Wireless Card
200Gb Hitachi Hard Disk
The CPU Upgrade I won't actually cover, not necessary when there is a fantastic sticky at the top of this forum. The Upgrade took about 15 minutes, but the actual swap took about 5 minutes or so, I was very anal about cleaning the heatsink and applying AS5. I think the biggest scare was the door unerneath, quite tricky to get off and put back on without damaging the tabs.
My main focus is the hard drive swap, whilst maintaining all the eRecovery software. For this I use Acronis True Image Home, I am aware that the trial can be downloaded or users obtain by other means, can I just say BUY IT as it only cost me £17 from Amazon.co.uk and as usual it was cheaper in the US. The biggest reason for buying is that some features are not available in the trial. I also bought a Laptop SATA External Drive Holder and boy was I glad I did......................
i have a xps m1730 with a t7500 specs in the sig after buying a few pu hungry games i realized that something had to be done so can i replace an x9000 to replace my t7500?
View 9 Replies View RelatedI had a major car accident and my m6300 is partialy destroyed.
I already called Dell and i have the Accidental Cover.
What do you guys think i will get to replace the m6300?
IT had 4gb ddr2, FX1600 Quadro, T7500 etc.
I recently received my Dell Studio 1535 after my motherboard on my inspiron 9100 fried. The lcd screen on the 9100 is much better (1680x1050) than the 1535 (1280x800), also i hate glossy screens. After reading this thread
[apparently i cannot post links yet, just search "LCD Swap m1530" in this site and you'll get it right away.]
I was hopeful that i would be able to swap out the 1535 screen and put in the screen from the 9100. I got both successfully removed, but kinda got stuck with the inverters and all that stuff, and got scared because i don't want to break anything. The thing that confused me the most was that the 1535 lcd plugged TWO things (power i think?) directly into the inverter, whereas the 9100 has only 1 thing that plugs directly into its inverter. It seems pretty clear that the original inverter has to be the one the computer uses based on all my googling of this subject, but how can i do that if it doesn't plug into the inverter the same way? can someone please offer me some help in this? i would have like to have contacted the original poster of the thread i linked, but of course, no contact information was available in his profile I may post pictures if i decide to take it all apart again. At the very least, can someone confirm or deny that it would be possible to make this swap? i will be very disappointed if i'm stuck with this low res screen forever...
I am in the process of swaping out my display from the CCFL to a LED RGB display and seem to be having a little trouble.
I purchased the replacement display with a new cable which eliminates the CCFL inverter.
It appears that is all I need to make this happen since no terminals are left without a connection.
The display comes on as expected when the machine is turned on. Its starts with a white screen at full bright then shows the Dell logo. Proceeds on to display the Windows 7 booting, but goes black when the login window should appear. Basically the backlighting gets turned off since I can see the login window, but not enough to work with. If I put the machine to sleep and wake it back up, I see the login as the screen is now a full bright.
Once logged in, I am not able to adjust brightness. Dimming with the FN-arrow keys or display preferences does not have any effect. Basically, nothing I do will allow me to dim the display.
I have tried all of the following:
1. Uninstall and reinstall the ATI display drivers
2. Reflashing the BIOS
3. Clearing CMOS
4. Uninstall and reinstall Dell's System Command
5. See if windows could find a better display driver (nope)
I am running Windows 7 Ultimate 64 bit and the machine has the ATI FirePro M7740.
has anyone tried/considered/imagined swapping a 13.3" LCD onto a 1210xps?
does anyone know if the 1330 LCD connector is the same?
i know it wouldnt look pretty but id be prepared to cut and paste the bezel as necessary since the laptop wouldnt leave my room
Can I swap non-Back-lit keyboard for Back-lit Keyboard?
There are some very nice systems @ outlet, but w/o Back-lit Keyboard
First off, hope everyone is having a great time during the holidays and lets not forget our fellow soldiers still deployed.
So I received my replacement on the 21st with T9800 but they are sending me another replacement with the QX9300 processor.
Scenario, lets say they decide to give me the 260's SLI instead of the 280's SLI (which is what they gave me in this replacement and this is dellienware)...
Could I take the 280's in here and put them in the 2nd replacement, obviously put the the 260's in here and return it like that?
So in short, I want to take these 280s out and put them in the new replacement. Take those 260s out and put them in this one and send it back to dell.
Any input would be great
Does anyone know if the blu-ray burner that is used in the XPS 16 can be used as a direct swap in the studio 15?
The reason I am asking is because I have a 16 with the blu-ray burner but the xps 16 is a bit bulky. I still need equivalent power and multi-media capabilities but the 15 is almost a pound lighter and lends to a little more portability.
I am considering purchasing the studio 15 but can't justify the costs of adding the blu-ray. I got my xps 16 with blu-ray for a steal and I can't duplicate those kind of savings with the changes recently made to EPP.
Ideally, I would like to swap the dvd drive and throw it into the 16 in addition to adding the blu-ray to the 15.
Thanks in advance!
I have just received a refurb E6500 from the Dell outlet and felt as if it wouldn't be powerful enough for engineering (found an M4400 on the outlet a day after I bought the E6500 that would have fit my budget ).
So after reading some reviews and looking at some pictures I have decided to do a motherboard swap with an M4400 (and if everything works out make $60 from it all too!)
I completed the swap. powered up notebook, then no bios screen showed, screen had pixels all around it and garbled lines and got progressively brighter, then all of the sudden windows log on screen appeared. Normally I would not care, but I want to install Windows 7, I cannot do this if i cannot access the BIOS to change the boot sequence.
View 15 Replies View RelatedIf I got a different Studio 1555 could I just swap the harddrives? Cuz I've already spent like 50 hours setting this one up with programs and files and settings etc.
View 5 Replies View RelatedI have to send back my studio XPS 1645 the thing is I have a Bluray drive in the system but the original configuration is a DVD slot load drive.
I would like to take the bluray drive out and put the original slot load drive back in (a dell tech did this for me last time) I was wondering if anyone knows of a guide or a wants to walk me through the process of doing a drive replacement
So dell didn't upgrade my screen when they replaced my lid today and still interested in buy a LED WXGA for my lappy
So I found a couple screens for the 1340 on Ebay but ... not sure on a couple of things:
I have a Arctic White Lid with a 2MP webcam and ccfl screen, is the current led screen or the one in the m1330 is compatible with my lid ?
Id like to swap the DVD drive for a Blu-Ray drive from another XPS M1530. I can not find any documentation on the drive swap.
View 13 Replies View RelatedIt is probably a little to early to ask, but does anyone know if the Backlit Keyboard and Trackpad from the Studio XPS can swap into the regular XPS M series?
Even if the backlighting didn't work, my main gripe is the silver keyboard, which is difficult to read under airplane lighting. Black keyboard with white fonts are much better.