I got my e1705 (st = C52RZ91) back in May 2006 as a high school graduation present.
I configured it for $2000 and had a $750 off coupon (woot woot) It's really done well the last 4 years and I anticipate it lasting at least a couple years more.......................................
I am having problems connecting an external monitor, Dell 2709W, to my Elitebook 820 G1.
I have an Intel HD 4400 graphics solution. The monitor says:
Out of range signal
Cannot display this video mode
change computer display input to 1920 x 1200 @ 60Hz.
I use a Display Port cable for the connection.
My OS is Win 8.1 64bit
I have used the HP support assistant to update all hardware drivers...
After running my B570 (1068) with an extended display, the unit went into hibernation. On wake-up the laptop screen is indecipherable garbage. The second display will run to show BIOS startup but then reverts to the built-in screen - which is illegible. Toggling the F3 key does not get a good screen.
I read another post suggesting this is a hardware failure. What parts have failed?
The monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
I was getting frustrated with my external monitor because the screen color was turning dark purplish at times, so I went into Device Manager and deleted both default monitor entries instead of just one under Monitors in hopes that it would've gotten rid of the purple haze so to speak.
I tried unhooking the monitor and unplugging everything before I deleted the default monitor entries in Device Manager, but it didn't get rid of the purple screen.
I have a fairly old notebook Dell Inspiron 4000 with WinMe installed and the display is no longer working assumed due to a bad or broken LCD, which is why I'm using the external monitor.
The external monitor has been working fine for months until it started turning purple on me when it was being used with the notebook. When the monitor is hooked up with my desktop, the screen color is just fine.
The notebook has got a lot of storage on it. During the boot process on the notebook, the external monitor lights up at one point (no longer purplish), but goes blank/dark after a few seconds and says it no longer is getting a signal from the notebook
my resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
i recently purchased my laptop (envy m6 k025dx i5-4200u model) and i try to find manual
i want output my QHD monitor by envy m6 but is it possible? m6 not has video card and now using HD4400 set
m6 has HDMI PORT(1.4 ver)
HP G60-44OUS Notebook PC The original monitor or screen went bad and I am using a external monitor which has been working fine. Today I can not get input to the external screen. I hooked it up to my TV. It has work there fine. Today it will not imput to that screen either. The start button light is white and the wi-fi button is orange, suppose to be blue. There are 3 activity lights.
The first (left) is on bright all time, which I think is normal. The middle light is dim. The right is off. As I can not see a display I am at a loss. Is there a key stroke for restart? It appears that the laptop is not starting. Repeated pushing the start button does not seem to work.
My laptop was working correctly and then I booted up one day, the bios worked fine but then the screen went black. I connected an external monitor to the lap-top and the laptop display works fine. As soon as I remove the external monitor, again, I get a black screen on my lap-top.
I have run the full system option of the Dell diagnostics and have 2 errors, battery and dvd flash rom. I have ordered a new battery. I have also noticed that my lap-top does appear to get quite hot.
Monitor in black display but with the power turned ON. Also, I cant do anything for any backup solutions cause of the reason above stated.
View 4 Replies View RelatedTried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
View 1 Replies View RelatedHow to install an external monitor to an HP 15 Notebook PC?
View 4 Replies View RelatedHp Envy 6t-1000 has a green tint to the monitor. There seems to be no black color. I ran the system diagnostics and everything passes. If I tyr the color palette check it fails. I have updated the video drivers, updated the BIOS, replaced the monitor cable and run a system recovery using the disks provided by HP. All to no avail. I can attach an extrenal monitor, either HDMI or USB, and it works. Only the built in display has the green tint and lack of black palette.
View 1 Replies View RelatedI just got an HP Envy, 17 inch, and I have an HP 25 inch monitor I would like to connect to it. It has the "old style" connector which was supported on my old HP Entertainment Notebook. Not on the new one! What kind of adaptor do I need to get? I do have an HDMI port on the left side of my laptop. Do I need just a regular HDMI cable?
View 2 Replies View RelatedAbout a month ago my screen cracked and the warranty is up. I had a spare CRT laying around so I just plugged it into that and it worked just fine as a substitute. However, today I had to reformat for various reasons and I did so using a friend's similar model laptop by putting my hard drive in it. After I got windows up and running I put the hard drive back in my machine and took it home.
After trying it out with the external monitor I've come to the conclusion that the standard vga driver does not support multiple monitors and therefore not my external (since the laptop still believes that the LCD is plugged in and functional even without any of the LCD wires plugged into the motherboard).
As it is the external blinks on during POST like should when the VGA port is tested. I'm sure I could solve this problem by disabling the LCD monitor in BIOS but since I can't see anything that is not possible.
It seems the only solutions left to me are:
1. Buying a new LCD
2. Buying/finding a new laptop
3. Some crazy hardware magic to disable the default LCD and let the external display during POST so I can get to BIOS and/or Windows Safe Mode
My hp envy can't detect the external monitor. I tried to re - install the graphic drivers (hd 4600 / Geforce 740m)...
It used to work and all of a sudden it stopped. My only assumption is that the HDMI output itself is not functioning.
The monitor will not come back on after sleep mode. The only way I can get it to come back on is to turn it off and then back on it has all updates.
View 2 Replies View RelatedI cannot connect my Probook 4430s to external monitor. I also have problems on the following device drivers. Are theDo I y related? need to download a new driver? What to download?All I want is to be able to use a larger monitor.
Port_#0006.Hub_#0004
USBVID_03F0&PID_311D&REV_0001
USBVID_03F0&PID_311D
[code]...
I have a brand new HP Envy X2 (15-C001dx) with Windows 8.1. So far it works fine by itself. I tried connecting an external monitor to the laptop using an HDMI cable from the laptop to an LG L246WPQ display. The problem is that 10-15% of the left side of the laptop screen content does not appear on the external monitor. Missing from the external monitor is the word "Start" in the upper left corner along with roughly the 2 leftmost columns of tiles. This occurs in both "Duplicate display" or "Only display on screen 2" modes. This is using a resolution of 1680x1050 which both the laptop and the LG appear to support. Using the touch screen on the laptop I can scroll the tiles to the right and see the missing leftmost columns. The information that is displayed on the external monitor begins as far left as that monitor will display. In other words, there is no black/blank area on the left. Except for the missing information on the left side, the content of the rest of the external monitor looks fine. I updated the laptop's video driver to the latest on HP.COM. No change in behavior. I tried every option I could find on the LG OnScreenDisplay, but nothing made the display any better.
View 2 Replies View RelatedMy note book brightness controls are not working ever since I've upgraded my machine to windows 8.1
Product name: HP Pavilion dv6 Notebook PC
Windows 8.1 Pro 64-bit
Product number: A7P25EA#ABV
Display driver : AMD Radeon HD 6700M Series and Intel(R) HD Graphics 3000
AMD Driver version: 14.100.0.0 (17/04/2014)
Intel Driver version: 9.0.0.0 (15/08/2012)
I started using my laptop on a slightly darker room in the last few days and now its giving me headaches since I cannot reduce the brightness.
When i turn on the laptop, display doesn't turn on even when external monitor connected via VGA/HDMI.. I hear CPU Fan sound, keyboard lights on, power light on.
View 1 Replies View RelatedI have a latitude E6430s running windows 7. I have it docked using a dell docking station, and have 2 dell monitors connected using dvi. With this configuration if I have the 2 monitors running I can't get any picture on the laptop screen. I wanted to be able to use all 3 screens at the same time is this even possible, how to have all 3 screen working at the same time.
View 1 Replies View RelatedI have connected my monitor to an external monitor. It works fine. Only problem I have ( and a little irritating one) is that the external monitor picks up display only after Windows is loaded. Pre-OS screens like BIOS settings, GRUB loader (I have Installed Linux ) doesn't show up)
Is this an issue with BIOS? Because, when I connect HP dv6000 to my monitor, I can see the BIOS screen as well. I am sure the problem is not with the monitor.
The BIOS is responsible for detecting displays before the OS is loaded right? I checked BIOS settings and there is nothing to indicate the display ports/devices (however, this page on HP website shows a BIOS screen "Advanced" which apparently has those settings)
I have MacBook Pro (late 2008) and I have WinXP installed in Bootcamp.
Recently I acquired a Dell SP2309W monitor that is capable of 2048 x 1152 resolution. When hooked to my MBP and start in WinXP, the external monitor works fine in EXTENDED mode. That is, I can move Windows to the external monitor. The MBP display is the primary display, where the Taskbar is displayed.
What I want to do is make the external monitor my PRIMARY display, with the taskbar shown there. However, the "Use this device as the primary monitor" is greyed out.
(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six months ago, approximately one week after the one year warranty expired.
View 9 Replies View RelatedI have an HP ENVY dv6t-7300 laptop. I'd like to connect it to a 1920x2000 24" monitor. My laptop has a max screen resolution of 1366x768. A couple of questions...
1). Is an HDMI cord the best way to to connect to the monitor?
2). Will the monitor stretch the 1366 pixels to fit the 1920 pixels or will the image not fill the monitor?
For the past several days a narrow horizontal line appears in the lower part of the screen on my Envy dv7 laptop - Windows 8, Intel i5 processor - that I purchased in Janurary 2013.The line flickers in various colors and is very annoying. I pulled up the BIOS screen and the line does not appear. I don't have another monitor to plug into, so I can't run that test. Everything else is functioning normally.
View 7 Replies View RelatedI just bought the HP ENVY 17-j180ca Notebook PC. I'm trying to calibrate my monitor for photograph editing. The software I'm using to calibrate the monitor with asked two questions I don't have the answers to...
1. Is the Gamut normal or wide?
2. Is the monitor backlit with Fluorescent CCFL, white LED or RGB LED?
I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA port, one that looks like a phone/broadband cable port, and one that looks like a USB port but indented on either side at the bottom. Can I even connect an external monitor? How do I find out if I have more than 1 video card? Besides the usual USB/headphone ports, I don't have any other ports. It says my drivers are up to date...but I don't even know what I should be looking for. Do I need to install something or buy some sort of adapter?
I am trying to connect a Dell external montitor via the VGA port with a VGA cable. The monitor has power but my notebook does not recognize/detect it. However, when I first plugged it in, my notebook display shrank into a square (vs the whole screen) so it recognized something...but nothing happened on the external monitor.
I tried detecting it via my display settings, but I accidentally changed some dispaly setting so that the home desktop only shows on monitor 1, but unselected my actual notebook display or something or changed it to be monitor 2 (even though monitor 1 does not exist), so when I plug the cable in to my notebook, all of a sudden my desktop goes away and it's a just a blank background screen - and I cannot access the computer display settings or anything.... when the cable is unplugged this setting looks normal, so I can't figure out how to fix it.
I discovered that my display wasn't turning on yesterday when I tried turning on my notebook. Luckily I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I really cannot be restricted to my living room or office to use my laptop.
View 1 Replies View Related