I came home from a trip and unpacked my laptop from its case and went about playing some relaxing TF2. When I exited to my desktop I realized how *filthy* my screen was so I started cleaning it off...
and then I noticed one big spot wasn't coming off. If I look at it from a different angle it disappears and its not acting/looking like a dead pixel so I think that theres dust stuck on the LDC itself.. if that makes sense.
I called Dell and they quoted me a price to fix it for $800. I asked if there was a way to fix it myself and they said they couldn't tell me.
Recently I've noticed that my entire right hand portion of my LCD is covered with black specs. At first I thought they were dead pixels, but some of the specs are larger, and lighter in color.
I opened up MS Paint and drew a circular dot around the black specs, and then I looked to the side of the LCD. I could still see the black specs underneath the dots, so I think it is dust.
Does anyone know how I could disassemble the LCD and clean the dust off?
Its 2 weeks since i have received my sxpx 16.... i luv it but there is a problem.
i found about 6-9 specks of dust within the Led pane which is only visible when the lap is switched off or on a black/white background..i dont know whether others have this complaint..
I've got a small dust speck behind the LCD pane on my new Dell SXPS 1340, so no amount of rubbing is going to help.
I've contacted Dell, and after a not so short in time yet short in number set of emails, they told me that my LCD screen isn't in a condition to warrant a replacement.
Fine, I don't need it replaced; I just want the spec out of there .....
i just got my Studio XPS 16 in from the dell outlet. it looks perfect other then the fact that between the glass and the screen there are 2 small marks that are not dead or stuck pixels.
i have one on the upper right and the other thats right in the middle. i was wondering if there was a way of fixing this as its anyouing the heck out of me
was working fine at the office, when i get it home on de hybernating the screen scrambled progresivly getting worse.
On restart there is a matrix style back ground behind the dell start up logo? isnt this VGA generated? or does graphics card handle things from power on?
If i allow to boot normally it blue screens and says its graphics driver I have not inslalled new drivers
it will boot in safe mode but there is still pink dotts behind all images, again isnt safe mode boot in safe mode with graphics from mother board in VGA
have disembled and resembled laptop and made sure graphics card is seated properly has made no diffrence
I got my Studio XPS 13 last night and spent about 5 hours installing Vista Business 64-bit from scratch and setting everything up.
It has been running great so far; however, I just noticed one or two dust particles between the glass and the lcd.
What should I do? It only bothers me when the background is white or light color. Should I ignore all that hard work and get it exchanged or am I being too anal about it? What are the chances of the next one being tightly sealed?
have beautiful LG screen in My XPS M1530 but recently i started to notice few black dots in the screen , i thought it might be dead pixel but they look completely different from all the pics i have seen in the internet .
It looks more like a dust particle then a Dead Pixel . and its very annoying
But I want to make sure before i call dell.
here are few pictures ( one in the middle and many in the side of the screen )
(Click On Them to See a Bigger Image)
I Tried for Better Pictures but this what i got any other means guys and if those are Dust Particles , how to remove them i have tried to clean them from outside its not going
Well, i took my D520 apart to give it a clean... And then it hit me to add a dust filter on the fan so it does not get dusty.
I had a OEM speaker out of my Taurus, and that has this very thin cloth like material covering the speaker for what ever reason
might just look nicer then seeing the speaker) I cut a little square out, and then placed it under the fan. The fan holds the filter nicely, and it does not take away from the cooling
I just want to know if Dell fixed the problem with their new screens, i am having some dust particles in the lower left hand corner..
i called Dell and after arguing with the rep, he said they will send me a box and i have to ship the Laptop to them for a screen replacement. The rep was saying that this was due because i dropped the laptop and cracked the screen, this is ridiculous because the laptop has been sitting on my desk and never been dropped.
Anyway, i just want to know if they fixed the new screens, because if they don't i can wait because the replacement screen will have to be replaced again in few months..........
I own a VGNZ890FKB laptop and I was wondering where does the air come into the laptop to cool it down? I know it expels the air on the left hand side through the grill.
Also it is quite dusty in my room and my laptop is starting to run hot with the hot weather, and I was wondering how to take out the dust? (without opening it)
Last week I sent in my HP DV5T to get fixed because one of the supervisors set up a repair because I told them that there was dust between my Inifinity Screen and LCD and that there are keyboard impressions on my screen. I send it in, and wait and check the order status.
Last night I checked and saw that I had a service charge of $428.35 so I called and questioned them. They told me that we had to "Escalate" the problem and that I have to personally talk to a Case Manager. I call the Manager and I tell him my problems. He tells me that the two problems that I have are out of warranty claims and that it is physical.
I argueed for almost an hour and still nothing. I gave up and they are in the process of returning my laptop. Thing is that, he said that the issue of having dust and keyboard impressions are now in the "ISSUE TRACKER" status and that HP will be looking out for others that have the same problem.
So what I'm hoping is that many of you that have DUST or Keyboard impressions with your INFINITY Display, call up HP and complain because they said if they hear about it enough, that it will fall into a Design Flaw and that we will all get Brand New screens.
I've noticed that all HP Infinity Displays get dust by people that posted comments here on the Notebook Review, so whether or not you have a DV5T or anything else, just as long as you have a INFINITY SCREEN, you should call and complain because we should not be held responsible with the repair costs for a design flaw.
when i have the back cover off i cant get to the heatsink completely.. there isnt so much dust there.. look at the pic in the red squares im pretty sure there is a lot of dust but i cant get to it?
how do i dust this thing, i dont just want to spray air into the vents...i actuly want to open it and clean all of it from dust, since i think this is become a problem with me and heating up and lagging in games. So how do i open this up without breaking it, do i unscrew the bottom?
what is the max RAM it can handle, second, how do i convince 3 little sisters they need to remove the dust bunnies from the inside of their laptop? (dv2000)
Theres a little speck of dust thats got to be behind the glass that i cant figure out how to clean. Im about 98% sure its not a dead pixel. Can i do anything about this?
Also, i have the tv tuner. How do i start watching tv? Is it through media center? i tried it and it cant recognize it, even after i go through all the steps. when i click on live tv, it says theres not tuner card.
When will the price of the m1530 come down? I want it, but it costs a lot.. After christmas maybe? Or am I better off getting something else?. I do live in canada so none of those amazing $400 off Inspiron/vostro coupons work...
I had made the mistake of lending my XPS m1530 to a friend who is in the hospital due to cancer and she gave it back all messed up.
Most everything don't work. I can't get online, a lot of programs don't work, such as trying to right or left click in the taskbar and other places... nothing happens.
I tried system restore to before she got the computer and nothing changes. I've ran AVG and spy bot and it found some stuff, supposedly fix them, but the problems remain. I defragged too.
So what to try next? Reformat? I don't want to if I don't have to.
So I'm having heat issues with my m1530...but that seems to be the norm.
So I've got a Dell tech coming out to replace the mobo & fan/ heatsink.
Do you guys know if the Dell tech will remove the old thermal paste, and use some AS5 (provided by me of course) instead of the crappy Dell thermal paste?
If not, when would be the best time for me to do it? Right away, or should I let the thermal paste set before I remove, and replace it?
