I've only had my laptop for a little over a week and the recovery drive is close to full. I don't know much about computers so I need to know what I need to have on my recovery drive and what I can delete. These are the folders in the drive-dell, program files, sources, tools, users, windows. There is also a file called MediaID.bin.
I recently purchased an HP Envy and am confused as to why my RECOVERY (D drive only has 2.37 GB out of 23.7 GB left available. I did perform a backup from McAffee after purchasing this laptop but nothing else.
I Have an acer aspire 5100 but when to format hard drive and do full recovery but nothing went on the disc does any one have a copy of the recovery disc to help me out amd turion 64 mobile 1gb ram 80g hard drive
How can one empty the recovery without to much risk to the system? D Drive is 89% full on Pavilion M6 1045dx entertainment PC - OS Windows 7 Home Premium
I am following the instructions from the Dell Manual for "Dell Factory Image Restore""" It asks me for a Password which I have tried with my ID and password.... I'm not getting thru that point...
My Recovery E: Folder is full -- 31.9MB free of 14.6GB - Windows Vista. I keep getting pop ups/messages saying that my E: folder is almost full, and occasionally that I should close my internet browser so I don't lose information.
Some of them discussions said to go into the E: folder and delete files which should be there (can't access it the folder -- there's only a warning message) or to change the Drive Letter (get a message that says it cannot remove "the letter drive of your volume", and now I'm not sure what I should do next.
I have had a problem with the DVD drive for a few months now. Sometimes the light on it flashes and you here it attempting to look for a DVD (When it's empty). When it's full it sometimes flashes and runs autorun. After it flashes it also ejects half the time, and also it'll just eject randomly without any warning or loading noises.
I explained the problem to Dell and they sent me a replacement DVD drive, but the problem still happens, so I'm guessing it's not the DVD drive itself.
Does anyone have any ideas on how I could solve this problem?
I have an Inspiron 1525 that I am dual booting between Windows 8.1 and the Windows 10 technical preview a while ago a bought two optical bay hdd caddy's that I was going to install in the 1525 and in one of my Asus laptops the Asus laptop install went without any issues but when I tried to do the switch with the 1525 I noticed that the connector is different so after looking around I believe I have found the caddy that I want to use but I want to be sure the only issue is the one I am looking at come in both a 9.5mm and a 12.7mm capacity and I am unsure as to which one that I have. I have a new SSD that I want to clone and then install in this laptop that I use as a HTPC in my basement, which size I need SATA 2nd HDD Caddy for 12.7mm IDE Universal CD/DVD-ROM
I would like to update the factory installed 160G Seagate HD to a larger WD750G. The Seagate is a 1.5 G/bs drive and the WD is a SATA II 3 G/bs drive and I have read that first generations controllers might not read the new drive. My Dell has a 0U990C motherboard with Pentium dual T3200 processor, BIOS A17 and an Intel GM965 chipset.
Will I be able to install this new drive without any problems?
I recently purchased a Dell Inspiron 15 that came with the partitioned data recovery feature. I immediately created 2 recovery disks. Yesterday, I sectioned my active hard drive so that I could have, in effect, 2 hard drives. The newly partitionedsection of the hard drive is naturally blank and I would like to install my data recovery or disk recovery information on it.
I have an Inspiron 1525 with windows 7. I use system mechanic 11.7 for PC clean up. Every time I started the computer I was getting multiple hard drive errors and had to run deep clean followed by scan check. I thought I had a faulty hard drive so I bought a new one and completely reloaded my OS.
I have dell inspirion N5110 . I formated only drive c for reinstall the windows .I am sure drive for recovery is still there . I did not delet it. now I have problem about drivers. I want to use recovery image in recovery drive but I can not run the recovery. How I can use the recovery drive.?
what I must do for factory settings or using recovery image in recovery drive ?
My uncle has a Dell Inspiron 1545 with 3Gb RAM, 160 Gb HD and Windows Vista Home Premium. On boot up there is an error message stating that a back up should be performed immediately as the hard drive has a serious problem.
The good news is that I managed to make a clone of the 160 Gb HD to a 1000 Gb HD (Western Digital Blue) using Paragon software before the original drive failed. The bad news is that the cloning process stopped at 42%, but this 42% included the recovery partition and another part of the HD called Dell Utility.
I installed the cloned WD drive and pressed F8 on boot up, but the advanced boot menu did not appear. Instead I get the error message 'no bootable devices'.
I ran the diagnostics program using F5. All the tests were completed and 'passed'. The BIOS recognizes the new drive as 1000 Gb.
Question: how do I boot the laptop? My uncle does not have any recovery media.
I have a Studio 1555 and keep getting the message that my drive "D" is almost full. Can I delete all these files and and let the system start backing everything up again? I'm also running Norton 360 which has a backup file on the same drive, is this double redundancy or what?
Inspiron 15z Ultrabook, Windows 8, DELL System Recovery.
I have an external Seagate Expansion Drive 2TB and had backup files on it. I created a new partition by shrinking the E: volume and made F: to use for the DELL System Recovery.
I selected the F: partition when asked what drive to use. I was 100% certain E: would never chosen during any steps in the process. After it finished I looked in Computer and found both partitions had been formatted and a DBR_Boot placed in both. Yet E: (where personal files were stored) is basically empty other than what appears to be a boot up capability and F: has the recovery files.
Why has this happened? I need those files. Is there a way to reverse the process or will file recovery software be needed in an attempt to regain those files?
I can't believe this hasn't happened to other people, must be a common occurrence. What I could do to recover lost files.
I just got my X1 back from lenovo after a full factory recovery (they had to replace my system board). As you can see, I have the new X1, and yet Dragon is missing (it is factory pre-load at this stage, all the lenovo preloaded apps included except for Dragon).
I have a laptop presario v6000 vista business, my d drive is under 200mb showning full, i have a 2 tb external drive but im unable to back up due to volume (machione says needs 1 GB on each drive to complete operation .
WinDri says Base.wim at 1.3GB D:WINDOWS
screen shotsD:WINDOWS I have been reading most of the cummity notes on D drive but none of the susjesting have worked ?
I just received my T530 (2359CTO) and need to encrypt the hard drive. When I purchased it, I opted (among other reasons) for Windows 8 Professional because it comes with BitLocker. I then discovered that some ThinkPads have hard drives that support hardware encryption (FDE).
I've tried to figure out whether mine has this feature, but haven't had any luck. The BIOS gives me the option to set a hard drive password, but I'm not positive that it actually encrypts the hard drive with this setting.
a) how to figure out if my hard drive supports hardware encryption b) how to enable it
I am working on an Envy Pro 4-b000. The hard drive has failed. I have a replacement drive on the way, but I did not create a recovery disk when the laptop was purchased. It had windows 7 - 64 bit on it previously. What are my options to getting recovery media for this laptop?
If needed be in the future, could I use a recovery flash drive created on Pavilion 15 Windows 8.1 64 bits for recovery on a second computer with same operating system (Pavilion 17 Windows 8.1 64 bits). I just want to avoid having to buy a second expensive usb key, I paid 75 euros for the first one.
The hard drive on HP G62t-350 CTO Notebook was failing. I was able to create a recovery USB in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was larger, can't remember now but 250 or 500 GB. I know the Recovering the System after the Hard Drive is Replaced (Windows 7) says "To avoid problems, install a hard drive as large or larger than the replaced hard drive," but that's a question for later.
Computer booted fine from USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimal install. It goes through the process of partitioning the SSD and copying files. Then says to remove external media and reboot, computer will reboot several times during the process, blah, blah, blah. I pull out the USB and reboot, but after POST I get "No bootable media present".
If I try to reboot leaving the USB in, it boots to USB and we're back at the beginning. I am able to confirm with a rescue disk that the SSD has one NTFS partition that has had Windows files copied to it, and a large amount of unallocated space. (Something like 60%/40%.)
How do I make the hard drive bootable, and if it were bootable, would the recovery process complete?What's going on with the partitions? Is it creating the recovery partition first, and then after boot the recovery partition installs the OS? If so, I might have to abandon this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
I've noticed that after I bring my 5160 back on after putting it in standby, the fan kicks on at high speed and stays on until I power down and restart. Is that a BIOS problem or hardware and what can I do about it?
HP Pavilion Dv5-2077cl Entertainment NotebookProduct #: WQ799UA#ABAWindows 7 64-bit
I have been getting a random blue screen popping up every once and a while, that will "dump my physical memory" or something and then reboot itself after like 30 seconds. my hard drive was the reason for these constant errors. So I backed everything up, in preparation of a real crash. I am in the process of ordering a new hard drive from Newegg.com, and I would like to know if it is hard to replace a hard drive in a notebook, or if I should have Geek Squad do it for $50. Also, I dont think I have the Operating system disc that came with my computer, so how do I order that from HP and how much is it?And last but not least, Is there a post or video with instructions on how to install a hard drive and the operating system?
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
I have a year and a half old Inspiron 5010N and after about 5 minutes of being on (plugged in BTW) the screen goes dim for about 5 seconds and then comes back to full brightness. It only seems to do this once, then is fine for the rest of the use. Power setting is for "performance".
Any need to worry about an impending failure or any way to troubleshoot? It's just unnerving and doesn't seem right.
My cousin has an Inspiron 1525 laptop which has had an issue of booting. Randomly one day she received the following message, "Internal hard drive not found. Reseat hard drive". It also said from below "Boot to CD by pressing any key" that the "BOOTMGR is not found".
I received the laptop in this state. I booted from the CD (Windows install disc) and was able to reinstall Vista. I then updated all the drivers and had everything working like a charm. I thought I had hit jackpot with an easy reformat. After about 4 hours of having it running perfectly, as I was installing Windows updates, I received the "Internal hard drive not found. Reseat hard drive" message. Now I cannot boot into Windows and booting from the CD no longer works.
Here are some of the specs:
T2390 Dual Core 1.86Ghz 2GB RAM 160GB SATA HDD
Is the hard drive dying? Is it the SATA controller? The motherboard? Anyone have any ideas or past experiences?