I have a problem with my Inspiron6400. The AC-adapter powers and runs the system correctly but does not charge the battery. In the BIOS set up I read "unknown AC adapter installed", which of course isn't the case: it is the original one that came with the laptop. I updated the BIOS to the latest version (A17) but this doesn't solve the problem.
View 4 RepliesI've got a XPS 15 (L511Z) which recently stopped charging the battery. It says plugged in but not charging when I hover the mouse over the battery icon. Luckily I've got an extended warranty and on contacting Dell they sent out a new charger. I plugged that in and the same result. In fact now when I boot the laptop it gives me an "The AC adapter plugged in cannot be determined" message.
Dell then asked me to buy a new battery since batteries are not covered in the warranty. Did that but still no luck. Am thinking that the original battery was ok to begin with anyway! Dell then asked me to update the BIOS but when I tried to with the update they gave me it failed, saying incompatible with the current hardware.
I then ran the DELL Support Center utility which identified another BIOS update which updated successfully but then I noticed that it changed the Product to L501X now. The charging issue still persists though.I've sent a response back to Dell but based on what I've been reading on the forums it looks like the motherboard would have to be replaced.
So, I've had a dead battery on my Inspiron N5010 that would not hold a charge. I also noticed that when i plug in the Dell 65W AC adapter that came with my computer without the battery (as a temporary power source) and the light on the AC Adapter shut off. I've used other dell AC adapters and the same thing happens (AC adapter light cut off). Identifying these problems, I purchased a new battery and the battery worked perfectly fine but when i plug in the AC Adapter, the AC Adapter light would cut off and would not charge the battery. I figured it was a Mobo issue but discovered that the I/O ports for the AC Adapter are on the daughterboard. I purchased and replaced the daughterboard. I plugged in the AC Adapter and now the light on the Adapter stays on. The adapter can now be used with or without the battery but it will not charger the battery. Every time I turn on my Dell Inspiron N5010 laptop, I get the following message:
"The AC adapter wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. Please connect a Dell 65W AC adapter or greater for the best system performance."
- I replaced the I/O circuit board (daughter board)
- I Flashed the BIOS
- I Installed Dell QuickSet
- I am using the 65W Dell AC adapter that came with the laptop
- The AC adapter that came with my N5010 works on other Dell laptops
- I've used a different 65W Dell AC Adapter.
- The adapter is not charging the battery (Plugged in but not charging)
- The green light on the adapter stays on all the time when in use
Inside of the BIOS the AC Adapter Type is "Unknown". what else do you recommend I do?
I'm using a old dell inspiron 6400 this isn't my main laptop anymore but i still love it so i want to fix it a year or 2 ago the laptop wouldn't boot i fixed it by taking one ram stick out of DIMM B i have 2 slots it use to have 512mb on each side one on dimm A and one on Dimm B. I want to use the second ram stick so i can use 1024 mb of ram. if i put them both in numlock 9 is on(and shining green) numclock A and Numlock down arrow are blinking(green).
and also i get a arrow at boot saying the ac adapter type cannot be determined please connect a dell 65w charager or better for optimal preformance and blah blah the battery will not charge and performance will decrease. I purchased to dell chargers with my laptop a 65w and a 90w they both give the sam error i did research on both my problems until i joined this and someone said that the cords were flexed and the wires weren't connecting. well both of my chargers have been flexed for 1-2 years is this why?
appearing wifi adapter is not installed at Inspiron 5420. Scanned and updated. But no difference.
View 1 Replies View RelatedI lost wi-fi internet on my Inspiron 1545, running Vista (6 or so years old). The network adapter was showing up as not installed or not working. I tried returning to earlier restore point. No good. System restore no good. Finally I reinstalled the Vista OS from disk that came with the laptop. But still no network adapter showing in Device Manager. When I insert Resource CD, the WLAN mini-cards are showing up as installed on the system, but no sign of them listed in Device Manager.
So my question is: how do I install the network adapter, or get the system to recognize it if it's there? There is nothing on the resource CD called "network adapter" to install, and I don't see anything like that to download here on the Dell site. Any thoughts?
Oh, I ran the system diagnostics on the Resource CD. In addition to the battery needing replacing (which I already knew) I got the following:
Error code 4400:011A
Msg: SCSI-0-000_DISK_GENERIC_MULTI-CARD-Target not ready
My Dell inspiron 6400 has a battery that works amazingly but recently, I noticed a change in the behaviour. Anytime I switch the laptop on, the LED battery indicator shows me red meaning something is wrong even when the battery is fully charged. The battery charges normally even when I intentionally drain out the power and try charging it again. This is just to make sure that the battery charges fine. Infact, in windows, it shows me that the computer is on AC power even when it is not plugged into an AC outlet.
The BIOS shows "No battery installed" and windows tells me the same. Summarily, everything is fine except for the LED indicator showing Red and the BIOS telling me that no battery is installed.
I have problem with my dell. BIOS shows me unknown adapter and after that do not charge battery.
I tested my adapter with another dell and worked normal. But when i plug another adapter to my dell shows unknown.
Some solution? Like connect some pins on MB together?
I have the HP Pavilion dv6 originally was with Windows7 recently I have installed the windows 8 64bit. everything was working well now I have a problem with the internet adapter. the system cannot find it and the troubleshoot screen couldn't sole the problem. tried to uninstall the drivers also did not work. and your website couldn't find my laptop model don't know why!
Internet adapter: Realtek PCle GBE Familly Controller.
Also one device in my device manager marked as an unkown.
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
can I use any 15,4" lcd panel with 30 pin connection or what other things do I have to consider when buying one
is it important if its a glossy/glare/matt lcd or is it just a matter of taste .......
I have a Dell Inspiron 6400, Intel Centrino Core 2 duo 1.83GHz and Nvidia 7300 GO 128MB.
Current RAM is dual channel interleaved 1024MB total DDR2 SDRAM CAS 5-5-5-15 while in use is 667MHz (memtest+).
Memtest+ reports my FSB to be 166MHz.
I'm looking to get 2GB total memory, I currently have 1GB.
I searched the forums, but haven't been able to get the info I need, which is . . .
1.) What is the maximum ram supported by Inspiron 6400? and what happens if I plugin more than this? currently I have 1g
2.) What type of ram do I get for Inspiron 6400? Which of the following are ok? will all work fine?
a.) SODIMM 1 GB PC-5300/667 MHz DDR2
b.) SODIMM 2 GB PC-5300/667 MHz DDR2
c.) Corsair 2GB DDR3 SODIMM (1066 MHz)...............
I have a Dell Inspiron 6400 that current has a Intel T2400 1.83Ghz (Core Duo) and I'm wondering if anyone has upgrade recommendations for this? Currently I have .99GB Ram so that would probably be okay but any ideas would be appreciated.
Also, anyone know of an online maintenance manual for the Inspiron 6400?
All of a sudden, after some time, when I turned the laptop the screen has become very dim and I can't get it back to normal. I tried Fn+Up but it doesn't work.
My laptop is Dell Inspiron 6400.
The thing is that my aunt started downloading updates and things from Dell (as she told me,
I wasn't there) and in one of those updates, there was the bios, she updated the system, and then it never came back to life...,
so I was wandering if there is a recovery method with a usb floppy drive (I have one),
since I've tried the Windows Key + F and Fn + F with no avail, is there other option, other than replacing the motherboard? (I live in Chile, and here all computer related things are very expensive... and I don't have credit card to order overseas )
I am not a computer wizzard and take all the help you can offer. Here is my problem. On my inspire 6400 the sreen went black. After this happened, I connected an auxilery monitor which worked perfect.
View 9 Replies View RelatedI need to know if I can change the color an Inspiron 6400 (gray to black), using the plastic pieces of a vostro 1000 (black). I think they are the same.
If is possible, i need to know if I just need these parts:
- Dell Vostro 1000 Palmrest and Touchpad DX354 (BLACK)
- Dell Vostro 1000 15.4" LCD Front Bezel Trim PM606 (BLACK)
- Dell Vostro 1000 15.4" LCD Back Cover KT786 (BLACK)
- Dell Vostro 1000 Power Button Hinge Cover HX873 (BLACK)
firstly i thought may be antivirus problm but i uninstall that one.....soooo now again same problm........after 1-2 hours
when i click on the "show hidden icons" in taskbar then the taskbar icon display is veeeery very slow...and overall performance is much much much slow .....
In the forefront we can see the hinge, and in the background we can see the piece behind the hinge (PBTH) - I have no idea what to call it, so from now on it will refer to it as the PBTH. =)
Ok, the problem I've had - for years - is that the PBTH does not stay where it is supposed to stay.. the three plugs do not stay in their holes. This has caused the outer plastic part of the LCD cover to split when I close the lid.
After a few years of this, the bezel cracked on me... so I decide to get a new bezel, and I tried to fix the hinge problem.
I'm not sure what mechanism was used to keep those 3 prongs in their holes, but I was going to try contact cement (for a lack of better ideas) - if you have any other ideas, please let me know.
But now my problem is this:
Last night I glued the PBTH into place, put everything back together..tried close the lid - was met with major resistance - and the glue/PBTH bond broke.
I want to upgrade the ram on an older Inspiron 6400 from 1gb to 2gb. When I look online (including old posts on this site), it seems there are 2 options:
2 x 1GB Module 1024MB-533MHz DDR2-533 PC2-4200, 200p SODIMM; or
2 x 1GB Module 1024MB-667MHz DDR2-667 PC2-5300, 200p SODIMM.
Would my system be compatible with either types of ram? It currently runs 2 x 512MB 533MHZ DDR2-533 PC2-4200 .....
She's been getting a message when she turns it on that the battery has lasted as long as it can last and need to be replaced but she NEVER unplugs the system (
It's a 17" desktop replacement so she can sit in the kitche. (lolstereotypes))
My dad told her that it now wont turn on because the battery final bit the dust but it wont turn on plugged in.
It wont turn on without the battery in it either when it's plugged in. My dad ordered her a new battery she doubts it will fix it
I have a Dell Inspiron 6400 which I bought in the UK new from Dell in April 2007.
The battery is a 9 Cell type (upgraded when bought).
Within the first year it got used on the battery most of the time.
After that it has been plugged in with battery (for backup incase of power outage) about 95% of the time.
Now the power only lasts a few minutes before it totally dies. It charges up to 100% and discharges normally down to roughly 85%. Then this is the strange part, it jumps all the way down to 6% charge .....
I'm currently using a Dell inspiron 6400/E1505 notebook although i wish to upgrade to a studio 15 or 17 i cannot afford it at the moment i can however afford to upgrade the notebook i have a little bit more, the 2 upgrades i'm considering are,
Upgrading the RAM to 2 x 2gb (I spoke to someone on these forums a while ago about it and apparently it is possible) but i'm unsure if its worth it because i can't see anything that'll be different enough to warrant the upgrade .....
Whenever I play any type of game that needs a moving screen or any graphics at all, my screen will just shut off.
No sound comes out of the computer, the backlight isn't on, the screen is just dead.
I've been turning it off by taking out the battery and removing the power plug but haven't tried holding down the power button yet
I have a question. I'm trying to figure out if the inspiron 1505 and the inspiron 6400 have identical keyboards?
basically, i bought a 6400 a few years ago, it's still under warranty. It got stolen not long after i bought it.
I got my GF a 1505 and considering it was so cheap i didn't bother with an extended plan. now her keyboard is having problems.
So, basically i want to know if i can call dell and get them to send me a 6400 keyboard, (because it's under warranty), then put it in the 1505? then just send them the 1505 keyboard back?
My original Dell motherboard recently got fried (smoke, zap noise etc). I ordered a new one from eBay as Dell Canada doesn't sell them. The new one arrived today and I put it all back together.
When trying to power up, the green lights turn on for a couple seconds then goes off and nothing happens. The fan doesn't even power up.
Could it be something I did wrong (I've triple checked everything!), a bad replacement motherboard, or perhaps something else that got fried when the original one died.
Will the LCD from the 6400 fit on a 6000
View 4 Replies View RelatedI DID search but found conflicting information.
I have a Dell here that I just picked up free due to having a busted screen and a bad battery. Luckily I have a HUGE pile of dead laptops and had these parts!
The laptop says Inspiron 6400 on it but the service tag shows up as a E1505 on Dell's site. The service tag is 4Q38YB1 if that helps.
I put two 1gb DDR2-800 sticks in (though it comes up as 533MHz) and a 120gb SATA drive in.
I have an old Inspiron 6400 with Win XP, 80 GB, 2 GB RAM, Intel Core TM2 CPU. I want to install Win 7 Home Premium and use the laptop simply as a standby in case my newer Inspiron 17R 5720 is out of action. Is it possible to upgrade?
I don't care if the performance is sluggish - it's just a standby. It would only be used for emails and internet if my newer Inspiron is down. I used the Service Tag for the 6400 to look at the available drivers. For my Service Tag, the only drivers seem to be for XP or Vista.