I have problem with my dell. BIOS shows me unknown adapter and after that do not charge battery.
I tested my adapter with another dell and worked normal. But when i plug another adapter to my dell shows unknown.
Some solution? Like connect some pins on MB together?
Wondering if the the CPU and / or GPU on the Precision M4400 / M6600 are user upgradeable? Both in terms of is it physically possible and how does it affect warranty. If it voids the warranty, how likely is it that they can tell that it was upgraded if you swap the oringinal components back in before sending it in.
View 8 Replies View RelatedI have an M6600 running Windows 7.
The BT Moust is a Dell Travel Mouse F299K. When I add it through the normal bluetooth menu, it seems to add correctly, but the blue light on the mouse keeps blinking.
I updated the BIOS to A12- that got it working for about 15 minutes. Then it quit and I'm back to where I started. I tried the mouse on two other machines and it works fine. Even on a Macbook Pro.
System: Windows 7 Professional 64-bit Service pack 1
Problem: The laptop freezes several times a day, since we got the laptop two years ago. The freezes occur without dependance on how much hardware resources is the system using - it can freeze during video compilation or just when reading an internet article. The freeze is typically several minutes long, then the system often recovers and does all the events tasked to it during the freeze at once. When it doesnt recover in ten minutes, I turn the laptop off/on. Then all the files which were being written during the freeze have correct file size but are full of zeroes.
During the freeze itself, either it freezes when the light of HDD access is off - then sound doesnt work and mouse cursor is frozen too, or when the light of HDD access is on - and the light keeps shining during the whole freeze (not just blinking as usual), mouse cursor can be moved (but has Busy icon) and sound plays. It is possible to alt-tab into another window, but its not possible to use applications, run another application, or get to Start-menu. When you try to use the application you alt-tab into, it just goes non responsive until the freeze ends, then everything you inputed is performed at once.
The charger is plugged in and the battery is at 100%. This is a M4500 Precision laptop with Windows 7. I tried flashing bios from safemode, also from Windows PE.
View 1 Replies View RelatedI recently updated my Dell m4800 to BIOS A8 with Windows 7 64. I had been using a collection of older power adapters from my previous Dell m4400 without any issues. After the update, wow. A huge performance hit if I do not have the 19.5 volt and 9.23 amp adapter connected.
The m4400 power adapter is 19.5 volt and 6.7 amp. Pretty close right? Not any more.
I do have it connected to a Dell docking station almost all the time. Just checked. They are both 6.7 amp.
What changed in BIOS A8 and what the deal is with the performance? Looks like I need to request a new docking station, but I'm not sure IT will believe my story.
When I open a new window on my Dell Precision M6600 Windows 7 64 bit professional Laptop, that window will randomly have an "always on top" attribute. The problem does not seem to be related to any specific application.
View -1 Replies View RelatedUpdated: Found a better way to backup Bios only, Please see the end of this message
Let say your Vaio Z is using Bios R4040M3 and you move to Bios R4041M3 to use the official VT support. Later on, you want to move back to R4040M3 to use the Advance Menu hack. Unfortunately, you cannot move back as Sony never publish the R4040M3 Bios update. This is my current situation.
I decided to investigate a way to back up the current Bios. Using a program called Universal extractor, I managed to extracted the files in the original Bios update. The bios update uses a program called Insydeflash to flash the Bios. The Insydeflash uses a file called platform.ini to control its setting.
In the platform.ini file, there is a section called [FDFile]. The section [FDFile] has a parameter called BackupName. If we put in a file name here, the Insydeflash should save your current Bios into that file. Unfortunately, I cannot make it work with the Sony supplied Insydeflash. (version 3.38).
I managed to get the newer version of Insydeflash (version 3.72). The newer version has a new ini section called [BackupROM], as the following:
..........
[BackupROM]
Flag=0
FilePath=c:
FileName=....................
I've got a XPS 15 (L511Z) which recently stopped charging the battery. It says plugged in but not charging when I hover the mouse over the battery icon. Luckily I've got an extended warranty and on contacting Dell they sent out a new charger. I plugged that in and the same result. In fact now when I boot the laptop it gives me an "The AC adapter plugged in cannot be determined" message.
Dell then asked me to buy a new battery since batteries are not covered in the warranty. Did that but still no luck. Am thinking that the original battery was ok to begin with anyway! Dell then asked me to update the BIOS but when I tried to with the update they gave me it failed, saying incompatible with the current hardware.
I then ran the DELL Support Center utility which identified another BIOS update which updated successfully but then I noticed that it changed the Product to L501X now. The charging issue still persists though.I've sent a response back to Dell but based on what I've been reading on the forums it looks like the motherboard would have to be replaced.
I have a problem with my Inspiron6400. The AC-adapter powers and runs the system correctly but does not charge the battery. In the BIOS set up I read "unknown AC adapter installed", which of course isn't the case: it is the original one that came with the laptop. I updated the BIOS to the latest version (A17) but this doesn't solve the problem.
View 4 Replies View RelatedSo, I've had a dead battery on my Inspiron N5010 that would not hold a charge. I also noticed that when i plug in the Dell 65W AC adapter that came with my computer without the battery (as a temporary power source) and the light on the AC Adapter shut off. I've used other dell AC adapters and the same thing happens (AC adapter light cut off). Identifying these problems, I purchased a new battery and the battery worked perfectly fine but when i plug in the AC Adapter, the AC Adapter light would cut off and would not charge the battery. I figured it was a Mobo issue but discovered that the I/O ports for the AC Adapter are on the daughterboard. I purchased and replaced the daughterboard. I plugged in the AC Adapter and now the light on the Adapter stays on. The adapter can now be used with or without the battery but it will not charger the battery. Every time I turn on my Dell Inspiron N5010 laptop, I get the following message:
"The AC adapter wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. Please connect a Dell 65W AC adapter or greater for the best system performance."
- I replaced the I/O circuit board (daughter board)
- I Flashed the BIOS
- I Installed Dell QuickSet
- I am using the 65W Dell AC adapter that came with the laptop
- The AC adapter that came with my N5010 works on other Dell laptops
- I've used a different 65W Dell AC Adapter.
- The adapter is not charging the battery (Plugged in but not charging)
- The green light on the adapter stays on all the time when in use
Inside of the BIOS the AC Adapter Type is "Unknown". what else do you recommend I do?
I have the HP Pavilion dv6 originally was with Windows7 recently I have installed the windows 8 64bit. everything was working well now I have a problem with the internet adapter. the system cannot find it and the troubleshoot screen couldn't sole the problem. tried to uninstall the drivers also did not work. and your website couldn't find my laptop model don't know why!
Internet adapter: Realtek PCle GBE Familly Controller.
Also one device in my device manager marked as an unkown.
lan adapter disappeared (wifi is working fine) after w7 x64 fresh install.. I tried to: install all possible drivers; reinstall w7; ubuntu.. but the leds are just blinking and device manager finds nothing. Also i am missing drivers for:
ACPIHPQ0004
*HPQ0004
USBVID_138A&PID_0007&REV_0072
USBVID_138A&PID_0007
Looking for original M1710 - Geforce Go 7950 GTX Bios. I want to re-flash my video bios back to the original. Is the bios on the JLMOD.ISO CD? If so can someone tell me whats the file name?
View 12 Replies View RelatedI lost wi-fi internet on my Inspiron 1545, running Vista (6 or so years old). The network adapter was showing up as not installed or not working. I tried returning to earlier restore point. No good. System restore no good. Finally I reinstalled the Vista OS from disk that came with the laptop. But still no network adapter showing in Device Manager. When I insert Resource CD, the WLAN mini-cards are showing up as installed on the system, but no sign of them listed in Device Manager.
So my question is: how do I install the network adapter, or get the system to recognize it if it's there? There is nothing on the resource CD called "network adapter" to install, and I don't see anything like that to download here on the Dell site. Any thoughts?
Oh, I ran the system diagnostics on the Resource CD. In addition to the battery needing replacing (which I already knew) I got the following:
Error code 4400:011A
Msg: SCSI-0-000_DISK_GENERIC_MULTI-CARD-Target not ready
i cant find drive for my graphic card its only showing standard vga graphis adapter ...i have hp g2 250 f0y78ea .. runing windows 7 and al animations are really laggy
View 7 Replies View RelatedCouple questions - I'm leaning towards an M2400 but prefer the M4400 as long as it can fit in my existing Zero Halliburton briefcase.
The interior dimensions of the case are 16" wide x 11" deep.
Currently, it fits my M70, with the AC adaptor & bluetooth mouse on the right side.
As far as the batteries on the M4400 - will the 9 cell extended battery fit in my existing 11" deep case?
Also, what's the standard AC adaptor for the M4400? Will the 90w adaptors work with the E-Port?
I have a couple extra 90w adaptors for my M70 (D series) that would hopefully work with the M4400 and/or E-Port.
Lastly - I realize there's no S-Video out port on the M4400/E-series.
How would I output video to my (non hdmi) TV? Is there some sort of cable adapter available from Dell that would convert a video signal from the M4400 to either the S-Video input or the yellow video RCA jack on my TV?
Currently I use the Dell S-video to video (yellow) adaptor cable.
User pros & cons on the LED versus LCD screen?
Does the webcam on the LED have a lower resolution than the LCD webcam?
Lastly - who makes the 320GB 7200rpm FFS drive? Hopefully Western Digital.
Is the 500GB 7200rpm drive a FFS drive as well?
I recently upgraded my ThinkPad W530 laptop BIOS from version 1.11 (which it shipped with) to the latest, version 2.59.
After doing so, my two 16 GB DIMMS are not only showing up as 8 GB each, thereby cutting my usable memory in half from 32 GB to 16 GB.
I ran through all the normal hardware checks to ensure that one of the DIMMS wasn't bad. I tried each DIMM separately, tried in different slots, etc. They both show up just fine and even pass the memory quick test in the BIOS. Only, they are showing up as 8 GB DIMMs.
Is there a feature in the latest BIOS that would somehow limit this? It was working fine at 32 GB before.
And, unfortunately, there is no reverting back to BIOS v.1.11 from anything after v.2.55. It asked me if I was sure I wanted to proceed...this was the last type of problem I expected to see though. (I also tried reverting back to previous versions of the BIOS that were allowed and it didn't work...
I have a Pavilion dv6-1050us and prior to updating the bios as recommended by HP my charger would show both in the taskbar as the battery was charging and it was plugged in as well as on the led on the front left of the notebook. Since the update of the bios the charging icon in the taskbar no longer shows and the led light that shows the battery is charging no longer lights up. I know there is power going to the battery because the battery shows 100% remaining and will only discharge after I unplug the power supply. Is there a way to restore the bios to the previous verion even though the bios was flashed by the program HP uses? My antivirus program will not do it's weekly scan when the system thinks it's running on battery power. I must manually start the scan myself.
View 9 Replies View RelatedI have a Lenovo G480(Model 20156). My CPU is Intel Core i3 2370M. I have recently added another 1600 MHz RAM. But it is now showing 1333 MHz. I am using windows 8.1. Though I saw that some laptops can enable that by selecting XMP Profile on BIOS. But, my PCs Bios is not showing any option to select XMP profile or even any Advanced AI option.
My question is,
1. How can I resolve this problem and get my 1600 MHz RAM work fully?
2. How can I enable the XMP profile to get the full advantage of my 1600 MHz RAM?
Flashing the bios. I have a Aspire 5810TZ. I boot it up and it just says 'acer' and won't go any further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
JM4151135.exe FLA... GPC_V135.bin readme.txt FLASH.BAT
What do I do? I have tried copying the files to a USB and powering on with Fn-Esc held down. After letting go of the power button and holding Fn-Esc a different screen appears after 30 seconds. I let go and have given it 30 minutes but it is not doing anything. I have read online from other people the power button should be blinking. Do I need to rename one of the files.
Got my swap today! ( swapped cause heat/fan issues ). The first thing i noticed when i booted up eas that it came with A16 Bios. Latest on th Dell site is A15. Anyone got some info on this???
View 7 Replies View Relatedmy new Precision M4700/Core i5/FirePro4000/4 GB wont recognize a Samsung 830 as a HDD replacement. The SSD does not even appear in the BIOS. Attached via USB, works. Attached via adapter in Optical Bay, works. Sata II but okay. Its even booting the cloned Dell Image on my Z77 PC. ive replaced the Samsung 830 and nothing. No BIOS detection at Port 0.I treid all the Sata Settings with no luck. I bought a Crucial M4 and it works. But Only Sata II.
View 6 Replies View RelatedI cannot select my new SSD (M4 mSATA) in the boot order in the BIOS.
The mSATA drive DOES show up on the BIOS info page (first BIOS screen) but does NOT appear on the boot order page. The drive is visible and formatted in Windows 8 64bit and I can copy files to it,
Computer: Lenovo IdeaPad Y580 with a 1TB HDD (i7 CPU, 660M COU, 8GB RAM, etc.)OS: Windows 8 64bitSSD: Crucial M4 mSATA 256GB Model # M4-CT256M4SSD3Windows shows the drive as operating correctly. After some fiddling I did use disk management to populate the volume (238GB available) and assigned a drive letter. I successfully copied a txt file and can open the file.
I have created a recovery DVD but it doesn't recognize the drive when attempting to use--although I can see/use in Windows.
I have also removed the HDD and rebooted a number of times. So the drive is working but I cannot set it as a bootable drive. The things I have tried:
>>>Have you tried the ssd as the only drive>>> Yes.
>>> are both drives on the same sata contoller have you tried the ssd in the hdd port?>>> he SSD is mSATA and has a different port than the HDD (which plugs into the SATA port). I have tried w/o the HDD plugged in,
>>>could it be that the hdd has ahci and the ssd doesnt or vice versa>>> I have not tried disabling AHCI yet as a quick browsing showed this bricking some systems.
>>> See the Bootmenu of the BIOS setup utility. Make sure that the Boot Device Priority in the BIOS setup utility is set so that the computer starts from the device you want. >>> Doesn't list it as an option on the priority screen, BUT it is listed on the BIOS information page as recognized (HD0 I believe).
>>> Press F12 when the Lenovo logo appears on the screen while the computer is starting up to select the device you want the computer starts from.>>> Does not list the SSD drive as a boot option. Tried w/ and w/o the HDD installed.
I downloaded the A15 update exe but it is telling me I need to install BIOS update A10 first. there is no A10 listed for my service tag. is that available somewhere and if so after installing that will A15 ask for A11 next or will A15 install correctly?
View 2 Replies View RelatedI'm trying to install an extra Samsung 840 evo mSata in my new m3800 but the BIOS does not recognize the disc. I tried 2 840 msata both with same result not recognized.
Changed several settings in BIOS:
- disabled Intel Smart Technology- SATA operations to AHCI- Secure boot disabled- load legacy option enabled
Does the Samsung mSata is supported in an m3800?
The other day I was converting a video file. I walked out of the room and then when I came back 15 minutes later, my Laptop had turned off. I booted it up and the BIOS informed me that it had to close down due to overheating! I felt underneath and the part just above the DVD-ROM drive was extremely hot. I did the same again with my Laptop and it just shut itself down again after about 5 minutes. I removed the bottom and both the Laptop up and the fans on the bottom are working fine.
View 2 Replies View RelatedWhat is going on with updating the Bios with Dell laptops? I have a Dell M4500 precision laptop. I'm running Windows 7 pro 64 bit an I7 quad processor and 8 gigs of memory. I can't update the bios past V 07. When I looked through the support posts I found people asking the same question and when I did a search I found over 300.000 hits for the same problem many Dell laptops. What I have NOT found is Dell addressing the problem. Is it the update engine it's self or a problem with the computers? I installed all the patches and all the updates for my computer except the Bios.
View 15 Replies View RelatedI have a Precision m6700 that I'm trying to install OS X Mountain Lion on. The biggest problem I have at the moment is that the laptop won't wake from sleep.
It goes to sleep okay. With the slowly pulsating light on the power button, but when I try and wake it up the machine goes into a loop of trying to start and then turning itself off after a few seconds. I suspect it's something to do with ASF and Intel Management Engine getting confused by OSX. Or OSX not doing something it needs to before the machine enters sleep. In the bios log I see 'ASF2 force off' events that match the time and frequency of the wake attempts. How do I find out what is generating these alerts?
Alternatively, is there any way to turn ASF or Intel Management Engine off? There is a yellow sticker in the battery bay that says 3 ME DISABLED. From what I've read elsewhere this indicates that the Intel Management Engine is permanently turned off on this laptop. Why it's generating ASF alerts at all!?
I've also trying the CCTK tool with --asfmode=off. This reports that asfmode isn't available on this laptop.
Recently my hard drive started to fail. I purchased a new drive, installed a Windows 7 ISO onto a flash drive, installed it etc. I have an HP G60-237NR. I was reinstalling everything, and then I went to the drivers page for my laptop. I started installing stuff, by that time I was bored so I was going sort of from the bottom up if that order matters, I can give more details on that if I need to. I downloaded the BIOS update, since I thought "Okay, it listed it for my computer, I probably do need to update it since my laptop's like 6 years old".
Flashed the BIOS, my computer shut down, and then didn't restart like I thought it was supposed to.I turned it on and got " 104- Unsupported wireless network device detected. System halted. Remove device and restart." I tried to look up what to do, what I found said remove the network card, downgrade bios, plug it back in and you're good. Well I unplugged my network card and the two snap on wires that attached it, did all the stuff, and restarted it. I got the same error.
I meant to say I plugged my network card back in, but still got the error. In case I had gotten the snaps on wrong, I switched the snaps and double checked the card connections, but still nothing. Everything I found said that should have worked, I'm on the same BIOS version I started with but it won't recognize my network adapter.