Looking for original M1710 - Geforce Go 7950 GTX Bios. I want to re-flash my video bios back to the original. Is the bios on the JLMOD.ISO CD? If so can someone tell me whats the file name?
View 12 RepliesUpdated: Found a better way to backup Bios only, Please see the end of this message
Let say your Vaio Z is using Bios R4040M3 and you move to Bios R4041M3 to use the official VT support. Later on, you want to move back to R4040M3 to use the Advance Menu hack. Unfortunately, you cannot move back as Sony never publish the R4040M3 Bios update. This is my current situation.
I decided to investigate a way to back up the current Bios. Using a program called Universal extractor, I managed to extracted the files in the original Bios update. The bios update uses a program called Insydeflash to flash the Bios. The Insydeflash uses a file called platform.ini to control its setting.
In the platform.ini file, there is a section called [FDFile]. The section [FDFile] has a parameter called BackupName. If we put in a file name here, the Insydeflash should save your current Bios into that file. Unfortunately, I cannot make it work with the Sony supplied Insydeflash. (version 3.38).
I managed to get the newer version of Insydeflash (version 3.72). The newer version has a new ini section called [BackupROM], as the following:
..........
[BackupROM]
Flag=0
FilePath=c:
FileName=....................
I have problem with my dell. BIOS shows me unknown adapter and after that do not charge battery.
I tested my adapter with another dell and worked normal. But when i plug another adapter to my dell shows unknown.
Some solution? Like connect some pins on MB together?
looking to push my overclock past 700mhz now since my gpu is going to be getting a custom fan and copper heatsink. Whilst experimenting I found that past 700 the temperature no longer matters, the voltage simply isn't high enough. But I don't know of any software way to change this...
Anyway I can get it above the 1.32V for the gpu? looking at maybe 1.38-1.4.
Besides that if temperature even became an issue I'd experiment with liquid nitrogen, which being a chem student I can get pretty easily . It's a lot of fun to play with.
what is the stock gpu/memory clock on the geforce go 7950 gtx for the 1710?
View 13 Replies View RelatedI am getting ready to pull the trigger on a 1710 within the next week or so. Yeah, I know the 1730 is coming out but I really can't wait much longer and besides, the 1730 is by far one of the biggest and ugliest models I have seen Dell come out with. Sorry for that little rant but anyway, back to the main question:
There is a $350 price difference between the 7900 GS and the 7950. I have searched the forums and found a couple of relavant threads but I wanted some people who own both of these models to readdress this issue and let me know if you like the model you have or do you wish you would have gone with a different GPU.
I have done a fairly big search on these forums, and everything seems to be pretty vague as to what drivers to use on a Geforce Go 7950GTX with windows vista.
Does anybody have a direct link to the best drivers available?
can some 1 tell me wts the temperature for the M1710 with 512 MB 7950 GTX please ,,cause i just upgrade to it and i dont now whts gonna be and please tell me which program (am using 2 programs I8KfanGUI and NVTemplogger)
View 10 Replies View Relatedi'd like to know what kind of temps to expect from a normally working card.
What are your temps on idle (normal room temp 20c-30c)
and what are the max temp it reaches when say we run the ati tool graphical view. (Just for reference - when idle, ATI Tool reports 65c on my card, and after running the 3d view of ati tool the card will reach 104c).
I'd like everyone who has that info to post it here and i'll do the math and calculate the avarage working temp of that card.
Since different monitoring progs report different tempratures please state which program is reporting the temps.
I know this as been covered a millions times but I can't seem to find a straight answer. But I am trying to figure out my actual temps on my overclocked 7950 at 650/800
Using I8kfangui my temps are 59 to 82c with out any temp offset
Atitool temps are Identical 59 to 82c
Nvidia Mview is the same 59 to 82c
Now I though there was an 8 degree of set for I8kfangui, but its running the same temps as everything else is this my actual temps or there still an 8 degrees offset making my temps higher?
I'm just about to pull my dead 7950 GTX and send it off for repair ... they say they found the problem with this card failing and have a unique fix so we'll see. They are on Ebay if intersted.
Anyhow, I would like to replace all the thermal pads with a good thermal compound ... I was looking at IC7 synthetic diamond.
I am more than capable just never done this with my XPS M1710 so I need a guide. Question is, can all of the thermal pads be removed and replaced with IC7 or is the 1/32" gap between the memory and heatsink too much? I have read that you can fill this gap with pure copper shims but haven't found any details.
I have Inspiron 9400 with 7900Gs card. I have 9 cell battery. I have ordered 7950GTX, 4GB of DDR2 and also 130W power pack. Is there anything I need to install and use this card? I had a look thru the forum but I couldnt find any information how to instal this paticular card and what sor of BIOS will I need for the card and the laptop.
View 11 Replies View RelatedI have xps m1710 with 512mb 7950 gtx,2 gb ram,2.33 core due
I have some strange picture coming in my lcd some times,so can u tell me if my video card on the way to die,
also it happend a few times with Ghost recon advanced warfigter 2 during the game but if I press Alt+Esc to go to the windows thats strange picture dissapers and then I can go back to the game,its allways happen with the game but only 1 time with my windows,I reinstalled my windows and changed the driver version and still happining
My XPS M1710 started to show vertical green lines during boot up, then would go to a black screen. So I restarted in safe mode,
then disabled the video card.
It starts & runs fine now, no green lines, just reduced video performance, obviously.
This shows there is a problem with the video card. What is the best option now? New, used, or do they fix these?
I'm swapping out my 7900 GTX for a new 7950 GTX. Do I need to download anything specila to overclock it? Or will the stock Dell or G-Force drivers allow me to do so through the Nvidia control panel?
View 14 Replies View Relatedgaphics card has bitten the dust.
M1710 not overclocked
was working fine at the office, when i get it home on de hybernating the screen scrambled progresivly getting worse.
On restart there is a matrix style back ground behind the dell start up logo?
isnt this VGA generated? or does graphics card handle things from power on?
If i allow to boot normally it blue screens and says its graphics driver
I have not inslalled new drivers
it will boot in safe mode but there is still pink dotts behind all images, again isnt safe mode boot in safe mode with graphics from mother board in VGA
have disembled and resembled laptop and made sure graphics card is seated properly has made no diffrence
I'm currently jumping for joy right now. I FINALLY found a fix for those of us with an XPS M1710 and a 7950.
I was getting BSODs on drivers, nvlddmkm crashes in Vista, LCD Flickering in XP and whatnot.
I traced the problem to the way Memory controlling is handled in BIOS A07. If I would take out 1GB of DDR2, I would have no issues. Put back in the other GB and the issues would resume.
After downgrading to A06 I haven't had a SINGLE crash in Vista
For those of you that want to try A06 , I uploaded it to my site for you
XPS M1710 BIOS - A06
My nVidia Geforce Go 7950 GTX burned out about a month ago and I have been running it in VGA mode here in Dushanbe, Tajikistan.
Because I knew that Dell did not have support in this country I didn't contact support until last Friday, April 10, 2009. I had bought a full 4 year warranty when I bought the machine and the warranty expires in Sept 2011.
Dell agreed to replace the GPU under warranty, but said that they could only ship it to somewhere in the States, so I had them ship it to my office in Washington, D.C. and the package is now on its way to Dushanbe by DHL. I'll go inside and change the GPU myself, which, though, I'm not very handy with tools, I think I can do. I have the service manual and have reviewed the procedures and many of the very helpful posts on this site.
My question is that Dell Support is sending both the GPU and a new motherboard in case I need the latter. How do I know whether I need the latter, and should I just replace the motherboard even though the existing one seems to be running fine?
Dell shipped the parts to me on Sunday April 12 and they were received in my office in Washington on April 14. The invoice listed the total price for the GPU and motherboard at $1171.24, which apparently must be paid if I don't send the defective parts to them within 10 days.
Because I'm in Tajikistan Dell Support got a waiver of the 10 day deadline for return. I might just hang on to everything until I'm back in the States in October 2009.
My puter got messed up and I booted my delta OC'd card into Shitsta for 2 hours. and then decided to go back to XP.
my card died.
I still have a fx2500m but am lookin @ a fx3500.
Is the fx3500m HDCP compliant like the GTX?
I haven't put in my 7950 gtx yet because when I threw the one in that I had here it was DOA so I had to send back to the seller to replace, so the new one should be here in a week. Anyways here is the deal . .
Everyone is claiming since the 7900 GSX pulls such great scores in 3dmark05 (simular to the 7950) it is about the same. Here is the difference. When yall run 3dmark it defaults to a low resolution test. So here is an example. Im pulling low 9k with my 7900 GSX at default resolution. So I got a full version serial number for 3dmark05 and switched the resolution to 1440x900 and ran the tests with that. This should really show the memory difference and power of the better card.
The 7900GSX pulled 4262 at that resolution.
From what im finding online the 7950GTX at 1440x900 resolution pulls around 6700 at that resolution . If you have a 7950GTX test it out and post that instead.
Im sure at 1920x1200 resolution the differences would become even more apparant. So there is the final answer.
High resolution gaming (native resolution on our lappys) will show a big difference.
I have a 1710 thats a couple weeks old and I have a problem. As of right whenever I install drivers other than the dell drivers for my 7950GTX and am running on battery the screen breaks up into a bunch of vertical tears. So far I have used both the Laptop Video 2 Go drivers with the tweaked INF and Geforce Tony's recommended drivers and as soon as I unplug the power I get this problem. But like I said, if I uninstall those drivers and load the current drivers from Dell.com everything works great.
View 15 Replies View RelatedI just got my 1700 back from a temporary 3 month stint with my brother (his PC died and I decided to let him borrow it until something came along to replace the dead desktop.
View 10 Replies View RelatedI have a Dell Inspiron B130 laptop with Windows xp, and I would like to completely format the harddrive and reinstall Windows, but I do not have the original disks that came with the laptop.
I do have disks for a Dell desktop computer. I'm not worried about the drivers, as I have them backed up, but is it possible to use these other disks to reinstall windows on this laptop and use this computers windows key?
I have a Dell Inspiron 15 7000 with 1TB HDD. The disk is slow and want to replace with a 500GB SSD. I can remove the HDD and put in its place the SSD. However, how exactly to get Windows 8.1 installed on the SSD and the other Dell provided pre-installed software?
I made a factory image usb flash drive on a 32GB stick by using the backup & recovery software that came pre-installed. I also updated that software to the latest version available. However, when recovering from the flash drive it gives an error code 0x400110020000100A and does not restore Windows on the SSD. The SSD is formatted as NTFS (or FAT32 tried both) and can be read by the laptop if connected thru' a USB port. So, I know that the SSD is working and good.
I have a Dell Latitude E6410. I recently installed created a linux partition on my HDD but was not interested in keeping it. Anyway after I uninstalled this OS, the space allocated to it on the HDD was turned into unallocated space. I have been unable to merge it with my primary partition. What I wanted to ask was that if I perform a reinstall of my original OS(Windows 7 Professional), will I be able to recover the original partitions and how can it be done?
View 1 Replies View RelatedMy Inspiron 1545 needs to reset to ex factory condition. The manual and the dell website say press F8 several times once the Dell logo appears. Obviously this has been changed. How to achieve this?
View 3 Replies View RelatedI have bought a new dell Inspiron 3521 original Battery but it is not charging...when i placed the new battery the battery indicator flashing red light. When i connect the new Dell 90w Adaptor when laptop is Off the indicator turns white colour with blinking. I kept charger for more than 3 hours still the white light battery indicator with blinking.
Does the Battery charge when Laptop is turned Off, wil get any Battery indicator. How many hours need to charge a new battery.
Can i use Dell 90W battery to charge instead 65W?
I have tried removing static power , removing battery holding power for 60 seconds..removing all external items.I couldnt able to turn on the Laptop.
So far my Dell has been in shipping from China for 4 days.
Looking on here, it seems that it normally lands here in the UK on the 3rd or 4th day.
So, my question is, are they using a Canoe, or one of those old pedal powered planes to bring my Laptop to me?
I have been looking all over the internet and on Dell for the past 2 hours with no luck. I have a Dell Inspiron E1505. I want to wipe everything off this laptop except what was on it when I purchased it. I keep reading hit F12 or control F11 and then click Restore. There is no Restore anywhere. I have searched and searched and I can't find anything. I have found that a lot of other people don't have that option either.
View 14 Replies View RelatedI got a new SSD 512GB and will swap it with origianl HDD . How to put the origianal factory default image into SSD..
View 1 Replies View Related