Dell :: XPS M1710 Replacing The 7950 GTX
Sep 23, 2009
I'm just about to pull my dead 7950 GTX and send it off for repair ... they say they found the problem with this card failing and have a unique fix so we'll see. They are on Ebay if intersted.
Anyhow, I would like to replace all the thermal pads with a good thermal compound ... I was looking at IC7 synthetic diamond.
I am more than capable just never done this with my XPS M1710 so I need a guide. Question is, can all of the thermal pads be removed and replaced with IC7 or is the 1/32" gap between the memory and heatsink too much? I have read that you can fill this gap with pure copper shims but haven't found any details.
View 15 Replies
ADVERTISEMENT
Sep 4, 2007
I'm currently jumping for joy right now. I FINALLY found a fix for those of us with an XPS M1710 and a 7950.
I was getting BSODs on drivers, nvlddmkm crashes in Vista, LCD Flickering in XP and whatnot.
I traced the problem to the way Memory controlling is handled in BIOS A07. If I would take out 1GB of DDR2, I would have no issues. Put back in the other GB and the issues would resume.
After downgrading to A06 I haven't had a SINGLE crash in Vista
For those of you that want to try A06 , I uploaded it to my site for you
XPS M1710 BIOS - A06
View 11 Replies
View Related
Apr 14, 2009
My nVidia Geforce Go 7950 GTX burned out about a month ago and I have been running it in VGA mode here in Dushanbe, Tajikistan.
Because I knew that Dell did not have support in this country I didn't contact support until last Friday, April 10, 2009. I had bought a full 4 year warranty when I bought the machine and the warranty expires in Sept 2011.
Dell agreed to replace the GPU under warranty, but said that they could only ship it to somewhere in the States, so I had them ship it to my office in Washington, D.C. and the package is now on its way to Dushanbe by DHL. I'll go inside and change the GPU myself, which, though, I'm not very handy with tools, I think I can do. I have the service manual and have reviewed the procedures and many of the very helpful posts on this site.
My question is that Dell Support is sending both the GPU and a new motherboard in case I need the latter. How do I know whether I need the latter, and should I just replace the motherboard even though the existing one seems to be running fine?
Dell shipped the parts to me on Sunday April 12 and they were received in my office in Washington on April 14. The invoice listed the total price for the GPU and motherboard at $1171.24, which apparently must be paid if I don't send the defective parts to them within 10 days.
Because I'm in Tajikistan Dell Support got a waiver of the 10 day deadline for return. I might just hang on to everything until I'm back in the States in October 2009.
View 4 Replies
View Related
Jul 27, 2007
My laptop was in a car accident and the bottom chassis cracked open, it still works but long story short I'm getting a replacement. I was scared I would get one of the new 17" models with the POS 8600 card but to my relief my approval went throuh today, I just verified it and its an identically speced M1710 to my 9400.
View 15 Replies
View Related
Sep 6, 2007
Well the black keyboard that comes on the 9400/E1705 is a tad bit too loud for my taste. I was thinking of swapping it out for the M1710 keyboard, if its any quieter. At least mine here on the 9400 you can hear a mile away if you're typing away, and the "Enter" key is especially noisy.
View 12 Replies
View Related
Apr 11, 2010
looking to push my overclock past 700mhz now since my gpu is going to be getting a custom fan and copper heatsink. Whilst experimenting I found that past 700 the temperature no longer matters, the voltage simply isn't high enough. But I don't know of any software way to change this...
Anyway I can get it above the 1.32V for the gpu? looking at maybe 1.38-1.4.
Besides that if temperature even became an issue I'd experiment with liquid nitrogen, which being a chem student I can get pretty easily . It's a lot of fun to play with.
View 15 Replies
View Related
Jul 21, 2007
what is the stock gpu/memory clock on the geforce go 7950 gtx for the 1710?
View 13 Replies
View Related
Aug 21, 2007
I am getting ready to pull the trigger on a 1710 within the next week or so. Yeah, I know the 1730 is coming out but I really can't wait much longer and besides, the 1730 is by far one of the biggest and ugliest models I have seen Dell come out with. Sorry for that little rant but anyway, back to the main question:
There is a $350 price difference between the 7900 GS and the 7950. I have searched the forums and found a couple of relavant threads but I wanted some people who own both of these models to readdress this issue and let me know if you like the model you have or do you wish you would have gone with a different GPU.
View 15 Replies
View Related
Oct 2, 2007
I have done a fairly big search on these forums, and everything seems to be pretty vague as to what drivers to use on a Geforce Go 7950GTX with windows vista.
Does anybody have a direct link to the best drivers available?
View 15 Replies
View Related
Aug 22, 2007
can some 1 tell me wts the temperature for the M1710 with 512 MB 7950 GTX please ,,cause i just upgrade to it and i dont now whts gonna be and please tell me which program (am using 2 programs I8KfanGUI and NVTemplogger)
View 10 Replies
View Related
Jan 4, 2008
i'd like to know what kind of temps to expect from a normally working card.
What are your temps on idle (normal room temp 20c-30c)
and what are the max temp it reaches when say we run the ati tool graphical view. (Just for reference - when idle, ATI Tool reports 65c on my card, and after running the 3d view of ati tool the card will reach 104c).
I'd like everyone who has that info to post it here and i'll do the math and calculate the avarage working temp of that card.
Since different monitoring progs report different tempratures please state which program is reporting the temps.
View 15 Replies
View Related
Nov 18, 2007
I know this as been covered a millions times but I can't seem to find a straight answer. But I am trying to figure out my actual temps on my overclocked 7950 at 650/800
Using I8kfangui my temps are 59 to 82c with out any temp offset
Atitool temps are Identical 59 to 82c
Nvidia Mview is the same 59 to 82c
Now I though there was an 8 degree of set for I8kfangui, but its running the same temps as everything else is this my actual temps or there still an 8 degrees offset making my temps higher?
View 15 Replies
View Related
Aug 13, 2007
I have Inspiron 9400 with 7900Gs card. I have 9 cell battery. I have ordered 7950GTX, 4GB of DDR2 and also 130W power pack. Is there anything I need to install and use this card? I had a look thru the forum but I couldnt find any information how to instal this paticular card and what sor of BIOS will I need for the card and the laptop.
View 11 Replies
View Related
Sep 28, 2007
I have xps m1710 with 512mb 7950 gtx,2 gb ram,2.33 core due
I have some strange picture coming in my lcd some times,so can u tell me if my video card on the way to die,
also it happend a few times with Ghost recon advanced warfigter 2 during the game but if I press Alt+Esc to go to the windows thats strange picture dissapers and then I can go back to the game,its allways happen with the game but only 1 time with my windows,I reinstalled my windows and changed the driver version and still happining
View 15 Replies
View Related
Dec 18, 2009
My XPS M1710 started to show vertical green lines during boot up, then would go to a black screen. So I restarted in safe mode,
then disabled the video card.
It starts & runs fine now, no green lines, just reduced video performance, obviously.
This shows there is a problem with the video card. What is the best option now? New, used, or do they fix these?
View 3 Replies
View Related
Aug 28, 2007
I'm swapping out my 7900 GTX for a new 7950 GTX. Do I need to download anything specila to overclock it? Or will the stock Dell or G-Force drivers allow me to do so through the Nvidia control panel?
View 14 Replies
View Related
Oct 26, 2008
gaphics card has bitten the dust.
M1710 not overclocked
was working fine at the office, when i get it home on de hybernating the screen scrambled progresivly getting worse.
On restart there is a matrix style back ground behind the dell start up logo?
isnt this VGA generated? or does graphics card handle things from power on?
If i allow to boot normally it blue screens and says its graphics driver
I have not inslalled new drivers
it will boot in safe mode but there is still pink dotts behind all images, again isnt safe mode boot in safe mode with graphics from mother board in VGA
have disembled and resembled laptop and made sure graphics card is seated properly has made no diffrence
View 15 Replies
View Related
Feb 2, 2008
My puter got messed up and I booted my delta OC'd card into Shitsta for 2 hours. and then decided to go back to XP.
my card died.
I still have a fx2500m but am lookin @ a fx3500.
Is the fx3500m HDCP compliant like the GTX?
View 11 Replies
View Related
Dec 17, 2007
Looking for original M1710 - Geforce Go 7950 GTX Bios. I want to re-flash my video bios back to the original. Is the bios on the JLMOD.ISO CD? If so can someone tell me whats the file name?
View 12 Replies
View Related
Aug 22, 2007
I haven't put in my 7950 gtx yet because when I threw the one in that I had here it was DOA so I had to send back to the seller to replace, so the new one should be here in a week. Anyways here is the deal . .
Everyone is claiming since the 7900 GSX pulls such great scores in 3dmark05 (simular to the 7950) it is about the same. Here is the difference. When yall run 3dmark it defaults to a low resolution test. So here is an example. Im pulling low 9k with my 7900 GSX at default resolution. So I got a full version serial number for 3dmark05 and switched the resolution to 1440x900 and ran the tests with that. This should really show the memory difference and power of the better card.
The 7900GSX pulled 4262 at that resolution.
From what im finding online the 7950GTX at 1440x900 resolution pulls around 6700 at that resolution . If you have a 7950GTX test it out and post that instead.
Im sure at 1920x1200 resolution the differences would become even more apparant. So there is the final answer.
High resolution gaming (native resolution on our lappys) will show a big difference.
View 15 Replies
View Related
Oct 22, 2007
I have a 1710 thats a couple weeks old and I have a problem. As of right whenever I install drivers other than the dell drivers for my 7950GTX and am running on battery the screen breaks up into a bunch of vertical tears. So far I have used both the Laptop Video 2 Go drivers with the tweaked INF and Geforce Tony's recommended drivers and as soon as I unplug the power I get this problem. But like I said, if I uninstall those drivers and load the current drivers from Dell.com everything works great.
View 15 Replies
View Related
Feb 21, 2008
I was going to be assembling an m1710 this weekend....
I called Dell Spare Parts a few days ago, and placed an order for the following;
HG345 Refurb bottom plastics, m1710
FF084 Refurb palmrest assy, m1710
J8841 Refurb speakers, LED, m1710
CF426 Refurb hinge cover, m1710
I've been watching the order on Dell's site all week, as it was scheduled to ship (on or before today) (2/21/08), and I opted for Next Day shipping.
When I placed the order, the woman I spoke with asked for my Service Tag number. I, um... don't HAVE one... I didn't say this, I simply said I don't have that information at the moment. She asked how I got the part numbers, and I told her from their own Spare Parts page.
Well....the order got cancelled today. Saw it online while at work, just before I left for the day. Another order number with the identical items was created, with a scheduled ship date of 3/3/08. WHAT?
The woman just called....she states they cannot process my order without a service tag number. YOU HAVE GOT TO BE KIDDING ME!
I told her I don't have a tag number....she asked if I was building one. "Yes." To which I hear...
"Oh....well, I don't think our supplier will allow that without a service tag number, because we reserve those parts for people who bought m1710's."
I said "That's amazing...because I know a number of people who have done the same thing I'm trying to do, and had no problems getting these parts."
"Well, that's because they have m1710's"
*mad enought to scream at this point* "Um, no...where do you think I got the idea from?? I'm certainly not the first person to have this idea."
how I can get them to sell me some refurbished plastics? What's the secret password?
View 15 Replies
View Related
Jan 13, 2010
I am down to 1 GPU on my M1730, in the interest of replacing it , from the forum sticky these seem to be the options
XPS M1730
Nvidia 8700M (both single and SLI****)
Nviida 8800M GTX SLI
Nvidia 9800M GT SLI
Nvidia 9800M GTX SLI
(I assumme this list is complete still . i.e. no 260's or 280's available)
Other than Dell or EBay are there any other sites , suppliers that people know of who might supply one of the above
DELL want 340 + Vat for a sli 8700m and there is every so often a 8800M for sale on ebay but they typically want approx 500 pounds for it (anyone had experience of buying one?)
I am dubious about the 8800 as evidence suggests it runs hot so would prefer a cheap 8700m or a warrentied 9800M
View 14 Replies
View Related
Jan 3, 2009
it's an owner to join such an informative/ friendly form
I have the M1330 system and after the crazy vertical lines and freezing over and over, the motherboard is replaced now.
My wonder/worry is, AM I able to use my notebook w/out the fear of the same issue coming again ?!
View 10 Replies
View Related
Sep 22, 2009
My E6500 is having the motherboard replaced later today. Is there anything I should be aware of or that I should check out once it's done?
View 10 Replies
View Related
Jun 30, 2009
I buy the SXPS 16 with a 4670 the minute it is released in Canada and configure it to as closely to my current config as possible.
When it comes in, I manually swap the HDDs from my current SXPS 16 to the new one.
Would this allow me to get around installing Windows and all my programs? Once I swap the HDDs and turn on the new laptop, will it boot up as if it was the old one, but with newer hardware?
And I'd just like to vent my frustration that I can't order the SXPS with the 4670 and a T9800/T9900 in Canada yet
View 3 Replies
View Related
Oct 20, 2009
I'm under the impression that the Studio XPS 1645 will be using a similar, if not identical, chassis to the 1640. Given that, how easy is it to replace the hard drive with a SSD?
I didn't bother with a SSD option on account of the price, but once the price comes down a bit I'm hoping to replace the drive and use the existing drive externally.
How much of a headache is this and what should I be aware of with regard to known SSD issues,
View 7 Replies
View Related
Oct 5, 2009
Well the worst happened and my trusted Dell M1710 powerhouse that I've had for several years was dropped into a tub of water. I've got the complete care warranty so I called Dell to get a replacement unit.
Well after waiting a little over a week Dell agreed to send me a replacement unit; however, since the Dell XPS M1710 is no longer in stock they're going to send me a Dell Studio XPS 16.
I was wondering if everyone here thought that was a fair trade or an upgrade?
View 9 Replies
View Related
Jun 12, 2009
One of my headphone jacks on my M1530 is broken and needs to be replaced. Are those part of a separate board that can be hooked into the motherboard without the need of any soldering? I'd like to get this issue fixed, and don't want to send it into dell depot for repair. So if it's just a board that needs to be replaced, I'd like to replace it myself. If so, what would the name of this board be? I haven't had much luck looking through the forum or online.
View 10 Replies
View Related
May 1, 2010
After two years of using my XPS1530, I received an error or reminder message that I need to replace my battery.
It's still working though, but not sure what is the side effect of not replacing the battery immediately.
Do I need to replace my battery if it's still holding more than an hour or so?
View 6 Replies
View Related
