Well the black keyboard that comes on the 9400/E1705 is a tad bit too loud for my taste. I was thinking of swapping it out for the M1710 keyboard, if its any quieter. At least mine here on the 9400 you can hear a mile away if you're typing away, and the "Enter" key is especially noisy.
View 12 RepliesI just ordered an XPS "Geniuine Keyboard" m1710, and it came and it isn't silver whats up with that?
My buds m1710 is silver. mine is gey.
did they change the part #?
what is the part # for the silver one?
and where could I get one .
I'm just about to pull my dead 7950 GTX and send it off for repair ... they say they found the problem with this card failing and have a unique fix so we'll see. They are on Ebay if intersted.
Anyhow, I would like to replace all the thermal pads with a good thermal compound ... I was looking at IC7 synthetic diamond.
I am more than capable just never done this with my XPS M1710 so I need a guide. Question is, can all of the thermal pads be removed and replaced with IC7 or is the 1/32" gap between the memory and heatsink too much? I have read that you can fill this gap with pure copper shims but haven't found any details.
My laptop was in a car accident and the bottom chassis cracked open, it still works but long story short I'm getting a replacement. I was scared I would get one of the new 17" models with the POS 8600 card but to my relief my approval went throuh today, I just verified it and its an identically speced M1710 to my 9400.
View 15 Replies View Relatedcan someone help me remove my old keyboard and replace it with the backlit one i just bought.
View 3 Replies View RelatedHas anyone attempted to replace the palmrest/keyboard assembly on their S XPS 16? I've done keyboards on older Dell laptops but this seems a bit more involved. The metal trim on the palm rest is coming up so it would be nice to have it replaced,
View 3 Replies View RelatedI have ruined the C key.
Can anyone tell me if I can just replace the one key OR must I replace the WHOLE keyboard and if so, what sort of cost might I be looking at?
I have an M1710, and I hate the look of the grey keyboard. I've alreayd purchased an M170 palmrest, but the M170 keyboard doesn't work in my M1710.
Does the 9400 keyboard simply plug into the M1710?
I was on here this afternoon trying to find a thread that shows some good overclocks people have gotten with the Geforce GO 7800 that is in my Inspiron 9400. But sometimes i swear I am the last person on this planet who actually HAS this card still. Not a GTS, GS, etc etc. Just a plain old severely underclocked to 250 GO 7800...
Has everyone managed to get a GS or 7900 or GTS or any of the other variations of cards the 9400 has had over the past year to two years? Everyone but me?
I have heard of people getting Dell to replace thier 7800 with 7800s but the last post I found about that was like a year old.
What could I ask Dell to replace mine with if I was to talk with them via chat? I would love any help in this matter. Everytime I game with my laptop I overclock it, but then I put it back to normal. Kind of a pain, and of course I hate how hot it gets.
way to get the Inspiron E1705/9400 to accept more memory? Dell says the max is 2gb but an XPS m1710 has 4gb. Is it just a matter of flashing the BIOS? Or should I be able to pop 4gb in it and that's it? I want to make sure I can get it to accept it before I buy it.
View 15 Replies View RelatedI've only had my Inspiron 9400 since May. I have used it on both battery and power, but most of the time power. Recently I've had to start using the battery more, from 100% charge showing if I unplug it from the power, it immidietly drops to 90% but shows I have about 2 hours of play. Is this just a dud battery. I have had dell previously and my battery was fantastic, even 3 years after buying it.
View 10 Replies View RelatedI upgraded my inspiron to a 7900 gs from x1400 a while back now (3months ago) and it has been running smoothly (games like quake 4/lotro at high graphics).
However, i have recently started playing Bioshock and after about 10 minutes of gameplay i got a blue screen of death with the following error:
Tried to write to read only memory (or something along those lines)
It specifies a NV4.dsp file
Was wondering if it is a driver problem or hardware?(running bioshock on high settings by the way (1440x900 res) and when it does run it runs well - a very playable 30-60fps)
One thing to note is that i didnt format when upgrading the video card - could there be conflicting drivers?
My sys specs are as follows :
intel duo t2400 (1.83)
2gig 667 ram
nvidia (dual pipe) 7900 gs (running stock on Mobile Force drivers).........
My friend has Inspiron 9400 that's on its last legs, it keeps turning off at random times, graphics on screen sometimes become corrupted. The laptop does not seem to be overheating and the fans are clean.
We've contacted Dell as he has a 3yr Complete care package, he's had the HDD replaced multiple times. The last time he sent in the laptop for serving they returned it with nothing fixed, they said they replaced the fans but the fans are still the original ones as I accidentally scratched the bottom side of the fans and they're the exact same one .....
I can't find cards anywhere, used or new! My GTX in one 9400 bit the dust this morning and my GS bit the dust 2 weeks ago (I have a few 9400's). I need to get some replacement cards but can't find them anywhere and woul
View 4 Replies View RelatedMy i9400 died last Tuesday. While sitting idle on a marble topped end table the fans went wide open for 15 seconds and then it just turned off. Not shut down, just dead. I went to bed figuring this must have been an overheat protection shutdown and tried to crank it up the next day and nothing. Hit the power button and the green light blips once and thats it.
I have the top of the line warranty and next day service so Dell came out 2 days later (not next day but close enough at first) and replaced the MB and fans. This got us nowhere. He gets on the phone with Dell and they send another MB and Processor as well for the next day.
Visit two with another MB and new processor produced nothing again. The field tech (pretty knowledgeable) said that this would have to go back to dell and that I needed to call them.
So I call them and they say that a third visit would be required I said fine send whoever, this thing is not coming back to life and my business is being severely hampered by this notebook being down. They try to re-diagnose over the phone and corectly come to the conclusion (again) that the computer is toast.
My problem is this: They finally conceded to me returning this $4000 brick to them but I could not get a i9400 loaner overnighted to throw my HD in to get back up. I've got my HD out and in an external enclosure but this really slows things down finding files and loading apps on another computer that is already slower to start with.
I've got a business to run and it is running slower with this laptop being down. I was told by Dell it would take 2 days to get a box to return the computer in and then 5-8 days to repair it and then shipping after that. An exchange would be up to 2 weeks total turnaround time...........
Is there a guide available anywhere showing how I am supposed to renew the thermal paste on these laptops (I have 1645 in particular). I heard it can have a great deal of effect on temperatures.
View 10 Replies View Relatedi just recived my tube of artic Solver 5 and i need some help on how to properly apply it.
how to i get to those parts, ie. what screws do i need to remove.
Dell replaced my motherboard and heatsink for a second time due to heat issues. In the last couple of days, I've noticed it's climbed yet again.
I'm now going to try Artic Silver 5 to see if that'll be up to the job, in a last ditch before I have to get Dell out here again (I'm not impressed with this at all).....................................
i got a dell XPS M1710 Its been overheating lately (gpu kissing 90) and shutting down i blew out the air vents and got tons of dust out but its still running hot. I figure its got a lot of dust up on the heat sinks and the like. That seems to be the main problem i noticed cruising the threads here. Its under warranty still so i called dell to come out and dust it, ect. They said they'd do that and replace the fans/heatsink, ect. I guess that's fine, but when i asked if they use AS5, or if they would if i provided them with some, the guy said they dont because it can cause shorts in laptops or something ... is this true?
I asked what they use and he said thermal pads and some kinda paste combo.. thermal pads generally suck, if theyre replacing all this wouldn't AS5 be the best bet? or can it really cause problems. If its being taken apart and switched up id really prefer the guy slapping some AS5 on there even if i gotta buy it.
someone else sugested offering to use AS Ceramique since that should be non conductive, but ive never used that before. My main concern is that if theyre taking it all apart i dont want pads and their junk back on there, because i always thought pads suck.
can the silver really cause a short?
Also i was thinking that maybe i dont want them replacing the fans. Im pretty sure they use refurbished junk with the parts, wouldn't it be better to leave the old fans that worked fine in there, instead of risking some broken piece of junk being slapped in?
i called them over a week ago before going on vacation and they said i couldn't set up an apointment more than a week out so i had to wait till i got back. I just got home today and am waiting for some sugestions before i call them and set this up
I've noticed that it's not that easy to get access to the CPU and GPU in the M6400, on the M4400 it's much easier, anybody has done it before ?
View 5 Replies View Relatedi did some tests before and after applying artic silver to both my cpu and my gpu, here are the results:
Stock cooling temps :
GPU max: 81C
CPU0 max: 75C
CPU1 max: 76C
( the photo was actually incorrect, as i found it was from when i was testing overclocking setups )
then i opened up my lappy and applied some AS5:
CIMG0676.JPG
CIMG0677.JPG
CIMG0679.JPG
and finally my temps are with the new AS5:
temps artic cooling.jpg
( wut? them CPUs are the only ones feelin it :P )
now the air that goes out of the vent is really hot, this did not happen with the stock dell cooling paste.
i just applied it, so should take 200 hours to take full effect
*Update*
After about 190 or 200 hours of use, my temps are really the same... i dont know if it could be winter, because in winter my house gets a bit warmer.. i will, however, try to get to the same room temperatures i had back then and do the stress test
*Update (again )*
After removing and re-applying the AS5, i found out what i was doing wrong:
1- i did not put enough AS5, it needed a bit more for the heat assembly to have perfect contact
2- i did not put enough pressure on the GPUs screws because i was afraid of breaking it
After doing this i find that on the first stress test i get 3 or 4 C lower temps ( from 82 to 79 C ) il do some more stress tests and update the temps.
i have a dell xps 1530, with geforce 8600 gt, i would like to know, if i apply the arctic silver 5, can i reduce some degres? or is it the same?
why dell notebooks has a poor coolling system, when i had the hp pavilion dv6645us i never had problem with temperature and noises
The silver trim that runs around the border of the case is starting to wear away and pit around where my palms rest. Is this something covered by warranty? And if not is it reasonably affordable / simple to fix?
The main reason I wanted this computer was for it's looks, so the fact that it's already starting to form visual defects is really, really annoying.
For those who replaced stock paste with AS5, without making any other alterations how significant was your temperature decline (average CPU and GPU decline).
View 10 Replies View Relatedwoot! think i'm gonna get one. too bad the coupons didn't last this long
View 10 Replies View RelatedI have three processor questions regarding the M1330:
1. Is it possible to upgrade from the Intel T5250 to the T8100?
2. Are Dell processors a proprietary size or shape?
3. Can I artic silver the processor to make it run cooler?
im thinking about buying the Sony Vaio SR-Series..
Unfortunately the only color option in Denmark is Classic Silver!
So i would really like to see some pictures of it, and there arent many of the Classic Silver model on the internet.
So if someone own the laptop, i beg you please take some pictures of it and post it here...
(Oh and i can see the laptop since Sony only sell the SR-Series on SONY STYLE and not in the stores..
I was giving my 1645 a nice cleaning when I noticed a depression on the left hand side palm corner. The black of the palm rest actually sinks below the the silver trimming. Is this normal? is it supposed to be flush? Does it mean I need yet ANOTHER part replaced on this damn laptop?
View 10 Replies View RelatedI was going to be assembling an m1710 this weekend....
I called Dell Spare Parts a few days ago, and placed an order for the following;
HG345 Refurb bottom plastics, m1710
FF084 Refurb palmrest assy, m1710
J8841 Refurb speakers, LED, m1710
CF426 Refurb hinge cover, m1710
I've been watching the order on Dell's site all week, as it was scheduled to ship (on or before today) (2/21/08), and I opted for Next Day shipping.
When I placed the order, the woman I spoke with asked for my Service Tag number. I, um... don't HAVE one... I didn't say this, I simply said I don't have that information at the moment. She asked how I got the part numbers, and I told her from their own Spare Parts page.
Well....the order got cancelled today. Saw it online while at work, just before I left for the day. Another order number with the identical items was created, with a scheduled ship date of 3/3/08. WHAT?
The woman just called....she states they cannot process my order without a service tag number. YOU HAVE GOT TO BE KIDDING ME!
I told her I don't have a tag number....she asked if I was building one. "Yes." To which I hear...
"Oh....well, I don't think our supplier will allow that without a service tag number, because we reserve those parts for people who bought m1710's."
I said "That's amazing...because I know a number of people who have done the same thing I'm trying to do, and had no problems getting these parts."
"Well, that's because they have m1710's"
*mad enought to scream at this point* "Um, no...where do you think I got the idea from?? I'm certainly not the first person to have this idea."
how I can get them to sell me some refurbished plastics? What's the secret password?
Is there any way to preserve finish of the Sony Vaio FW, particularly on the mouse buttons and where the palm-rest is, I hear the silver stippled paint finish wears away leaving bare white plastic underneath.
Is there a skin or plastic screen cover that you guys use or recommend to prevent this or hide defects?
I recently picked up this bad boy for just $744 (after 12.3% bing cashback (Google it if you don't know what it is)).
[url]
Has anyone heard any other issues with this laptop?
It has the 1600x900 screen which I've heard some criticism of (I heard something about it having a one-lamp "eco" screen) but I don't know if that applies to the model I bought or how good the eco screen is.
If I can get a skin that is precut for that laptop's dimensions in particular (nothing fancy, just black would be good), that would be awesome.
I'm considering this skin, but it's not precut, and I don't know how good it is...
[url]