Dell :: Inspiron 9300 On Board Keyboard No Longer Recognized
Nov 28, 2009
I'm hoping this is in the right area.
I have a Dell Inspiron 9300 It's upgraded about as far as it can go. I use a desktop for the occasional gaming or rendering but this is my daily driver.
The issue. I took it apart the other day to see if my screen hinge could be replaced and to install a DVD burner. Now it no longer recognizes the onboard/integrated keyboard. It still recognizes the touch pad but not the keyboard. I went as far to buy a whole new OEM keyboard. Still nada.
View 9 Replies
ADVERTISEMENT
Apr 10, 2009
this is my first post so a quick hi to all of you and thankyou for many solutions in the past which have spanned from this forum.
Well i have had to bite the bullet and register so i can ask you guys for help...the story goes...
Ok i receive a laptop Dell Inspiron 9300 from a friend who has dropped it (well he says the kid knocked it off the couch and then to add insult to injury he followed it over and landed on it) well needless to say i diagnosed that the motherboard had failed as i ran the system from a barbones state to rule out any hardware failures. So i ordered a replacement board from the big old bad Ebay guy that hangs around the internet...So i rebuild the laptop plug it all in and turn it on.. so far so good i see the Dell logo and select to enter the bios to which i see "entering setup"... now instead of going into the setup i receive only this...
"The ac power adapter cannot be determined. The system can only boot with a 130w power adapter or greater" .....
View 12 Replies
View Related
Oct 9, 2008
I just purchased a 7800gtx for my 9300 IDE board. I then come to know that the new 9300 board comes with SATA.
My doubts are:-
1) Is this SATA board using the same Sonoma chipset?
2) Will the 7800gtx fit into this board?
3) Will the xps2 bios work on this board?
4) Do i need to buy extra hard drive caddy for SATA drive?
View 14 Replies
View Related
Feb 7, 2013
I have a Dell Inspiron 1525 - random keys on my keyboard no longer work,it out of warranty.
View 5 Replies
View Related
Sep 19, 2012
So I updated to Bios A09 hoping it would improve either my Wifi issues, my throttling issues, or my battery life issues.After the A09 update, my nVidia Graphics chip is no longer recognized, and therefore have lost my dual external monitor support. That may improve battery life I guess since the nVidia chip is now worthless and I'm forced to the Intel 4000. Not the change I was hoping for.
Is it possible to revert the A09 bios back to A06? Is this isolated to me, or was it just not QA'd at all by Dell?I worked around the wifi issue with a USB dongle, and am living with the battery life issues by getting less work done on airplane flights.Losing my multi-monitor support is killing my productivity. Also losing my patience with this machine and Dell in general.
View -1 Replies
View Related
Jul 15, 2007
I have a 9300. Is it possible to hook it up to a desktop and use my keyboard and screen to operate it instead of a separate keyboard and external monitor?
View 13 Replies
View Related
Mar 8, 2010
I noticed last week that the back light option on my keyboard no longer functions.I know the Fn key works on the keyboard as I can perform other Fn+ tasks and I know that the right arrow key (which is the same combo key that controls back-lighting) also functions on it's own.
Aside from normal Windows 7 updates, the only changes to my laptop recently has been flashing to the A07 bios and the new power supply mailed out by Dell.Am I missing a software option somewhere that defaults my back-lighting to off? Or is it a mistake (or intention) of the A07 bios to disable this feature given the recent power supply throttle issues with this model laptop.
View 15 Replies
View Related
Dec 24, 2014
I have a Dell Precision M4700 and am trying to use the keyboard backlight.
The problem is that even a short pause in typing, the keyboard backlight goes out. (about 5-6 seconds). It does not go on until I hit another key, (which then types that character, which I then have to erase).
Is there a way to set the keyboard backlight delay to a longer setting?
View 2 Replies
View Related
Aug 30, 2009
need help getting mouse to work on laptop
View 10 Replies
View Related
Jan 29, 2015
i have an dell inspirion n5110, the model with processor i3, and 500 gb hdd and last night the laptop was turned off and when i try to turn on return with 3 short beeps. The problem is from audio and usb circuit board and i want to replace it, but i cant find one in my region with the same part number. I found one with part number 2F34T and another one with 4WY5K, both are originally from another N5110.
On my audio/usb circuit boar is wrote:
554IE0200
1G12115B
FDKS1B
M/O: 000018577254
View 4 Replies
View Related
Nov 6, 2014
I bought a used dell Inspiron 15 3542 ..The control board under the touchpad is missing ( I was told this before buying) a wireless mouse works fine.
View 1 Replies
View Related
Oct 19, 2013
I recently had my computer wiped and reloaded, due to a wifi connectivity problem. Now the wifi adapter is working, but my backlit keyboard no longer turns on.
View 2 Replies
View Related
Apr 26, 2013
I have a Dell Latitude E6530 and when I plugged in my monitor and keyboard into the docking station, they were not recognized. But I can plug them into the laptop while docked and they are recognized.
View 1 Replies
View Related
Aug 1, 2007
Guide to Switching your Inspiron 9300/M170 WUXGA into the Inspiron 9400/M1710:
You can't simply replace the display screens. The instructions below must be followed for your screen to work properly.
Required Materials:
- Small Phillips (I used #0 Phillips)
- Either 2 monitors (9400 and 9300) or part #YPNL-N017B (Google the # to buy it).
Step 1: Remove the display assembly. Dell has an excellent guide for this on their website.
[url] Click on Display)
Step 2: Remove the LCD Bezel (the gray trim around the screen). This requires removing the screws under the circular pads. I used a small flathead to pry open the bezel.
Step 3: Remove the 8 screws around the sides of the LCD. This will make it so your screen can be taken out. Do not worry about any screws on the top, they are for other things.
Step 4: At the bottom of the screen, there is a green circuit board. On the left side, you will see a screw holding the wire down. Remove this.
Step 5: Remove the LCD screen from the case.
Step 6: Look at the bottom circuit board again. This is the board we need to swap! Disconnect the 2 connections on the board. There should be on on the bottom and one on the side that is white.
Step 7: There will be 3 silver screws holding the circuit to the screen. Remove these screws. Note: This requires a very small phillips. I used a #0 Phillips to do the trick.
Step 8: Repeat steps 1-7 for your other monitor OR if you don't have another monitor...you will need to buy an inverter chip. The mfg # is YPNL-N017B. If you google that number, you should find a bunch of sites willing to sell it.
Step 9: Simply swap the bottom circuit boards between monitors or insert the new one that you bought.
Step 10: Follow steps 1-7 in reverse to reconnect everything back up! Before screwing everything back up. I suggest you plug it in first to test it out.
Congratulations. Your WUXGA LCD will now work properly on the Inspiron 9400. For anyone wondering, you MUST replace the bottom circuit board or the brightness controls will not work. You brightness will be stuck at the lowest setting and nearly impossible to see.
View 11 Replies
View Related
Dec 18, 2007
BEEN a While and A long time...
I currently order a Pentium M 735 1.7 Ghz 400FSB to overclock up to 2.26Ghz@533Mhz. Still waiting on shipping. Anyways, I am looking forward about upgrade my GPU Go 6800 OCed 370Mhz/700Mhz to Go 7800 (NON-GTX).
Yeah, GTX one is pricey for me.
I am wondering does the Non GTX version of Go 7800 still need 130Watts Adapter?
I did a lot of search all I could find is people talks about 7800GTX version.
In my thought I think 6800 to 7800 different is more pipelines and pixel fill rates and etc and the power needed is the same. Right?
So do I need 130 watts or I just keep 90 watts adapter which is perfect for NON-GTX Go 7800
View 15 Replies
View Related
Sep 28, 2007
My Beast's 80 gig 5400 rpm HDD is on its last legs, and I was wondering what Hard Drives are available for me to replace my old one. I will definitely be looking to upgrade.
View 10 Replies
View Related
Sep 18, 2007
What exactly do I need to connect my Dell i9300 laptop to a regular tv? (not HD) I searched a bit but couldn't seem to narrow it down. I know I need a cable, but am not sure of the part number, and software if any. I want to be able to display what's on the screen onto a TV.
View 12 Replies
View Related
Feb 17, 2009
I'm looking to upgrade my 9300. I currently have the 1.6GHz 533FSB Pentium M and I'm looking to move to the 1.6GHz 400FSB pin modded to 2.13GHz.
I just have one question: will the following processor work?
http://cgi.ebay.com/Intel-Pentium-M-Dothan-1-6-GHz-2M-400-Laptop-CPU-
SL89T_W0QQitemZ350165690041QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item35016569 0041&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%
3A1|240%3A1318|301 %3A1|293%3A1|294%3A50
View 5 Replies
View Related
Nov 30, 2008
After installing XP media center on my inspiron 1520 i am unable to get it to recognize usb devices. I looked in the device manger at the drivers and it is missing some for the usb. I am not sure which one to download. I tried installing some and they did not work. I went to dell's site and did not find anything.
View 10 Replies
View Related
Apr 4, 2008
So speedtstep is enabled in bios and it says its running at the minimum which is 800 mhz and it shows a maximum of 1.8 ghz. I am running A05 bios.
I have tried all the different power settings in windows and they do not change it. I try running a few games and programs and it still sits at 800 mhz. I think something is messed up and don't know how to fix it.
Anyone know what I can do to see if the speedstep is working correctly so Im actually using my cpu to its max when needed.
View 11 Replies
View Related
Apr 3, 2009
I put my Inspiron 9300 into hibernate this morning, tried to wake it back up and all I'm getting aftet the Dell logo and status bar (POST) is a black screen with a blinking cursor in the left corner.
When I hit the Play button on the front of the notebook, it brings up the Dell Media Direct logo screen, but nothing happens.
When I boot with my XP CD and go to the recovery console, I can see the hard drive and files, though I can't access most folders because I get an Access Denied message.
I tried booting from my flash drive, but when I do, the flash drive is recognized as the c: drive and the hard drive isn't listed.
I also tried unplugging my laptop and battery and held down the power button for a few minutes to discharge any electricity. No luck.
View 5 Replies
View Related
May 9, 2009
I have an Inspiron 9300 with an 80GB IDE hdd. I have recently succesfully upgraded the RAM to 2gb. Im now looking to upgrade the HDD and would like to go for the Western Digital WD3200BEVE (320GB). I know there is something about the need to partition it as XP only sees up to 130GB but I also read somewhere that if you download HD Tune and if the 48 bit address box is checked then it will see the whole drive. As Im a bit of a newbie to all this, does that mean I can just pop the 320gb drive in and my system will see it straight away or will I have to partition it with no partition larger than 130GB?
Also does anyone know if the WD3200BEVE is the best one to go for in terms of performance and storage size?
View 9 Replies
View Related
Jan 23, 2009
My Dell Inspiron 9300 laptop has Windows XP Pro with all three SP packs, 80GB Harddrive 1 GB RAM, NVIDIA Geeforce GO 6800, 3 Partitions of 7.3GB, 2.8GB and 2.86GB - all showing plenty of free memory- with a number of peripherals - printers,
USB attachments etc available through a small network.
I have been using, successfully, Acronis True Image version 11, but I am unable to instal the latest upgrade version, True Image 2009.
I first installed it OVER he earlier version (as Acronis recommend) and I've tried installing after a clean removal of version 11, and the results are frightening .....
View 7 Replies
View Related
Mar 14, 2009
Both the fans of my Inspiron 9300 make a lot of noise. Previously in order to reduce noise I tried to completely remove the fans and cleaned them with compressed air.
At that time I found it weird that they did not make much noise when they rotated (pretty fast) because of the compressed air. The fans keep making the same amount of noise.
I notice that if I apply some pressue next to the keyboard where the fans are located the noise emitted changes.
View 6 Replies
View Related
Mar 16, 2009
I am helping a friend reinstall XP on his several year old Inspiron 9300. He doesn't recall an XP install disc coming with the machine (he just called Dell and they side he doesn't need one).
Since I have extra XP install discs/licenses, could I just use a retail disc to reinstall and then get the drivers from Dell's site
View 3 Replies
View Related
Jul 25, 2007
Been looking at newegg lately and RAM is crraaazy cheap. I've been meaning to upgrade my RAM to 2 GB.
Currently I have a:
Inspiron 9300
1.83 ghz processor
1 GB RAM
256 mb GO geforce graphics card
Windows XP
I play games quite frequently so the RAM would be great. However, I've never upgraded my memory or computer as a matter of fact before.
My question is, how much RAM will my computer support. Should I opt to go for a 2 GB (2x1 GB), 4 GB (2x2GB), or 2 GB of 1 stick of RAM and keep 512 mb of my Dell RAM to try and get 2.5 gb of RAM? Is the last option feasible?
View 10 Replies
View Related
Nov 16, 2014
I have three usb ports, and none of them seem to be working. Although the devices work on my roommate's laptop, they are not recognized on mine. When I plug my flashdrive into hers, it lights up, but that doesn't happen on mine. I recently reset my computer to factory settings to try and fix other issues including the problem with the usb ports, but the usb devices are still not recognized.
I recently sent in my laptop due to problems of it not being able to turn on, and my battery and a/c adapter were replaced. I was quite happy. However, I do not want to send it back in even though it is under warranty. Since I am a college student, I really need my laptop. If nothing works, I'll send it back in over winter break so I'm not without a laptop during my studies.
My touchscreen is also not working, so how to fix that, here is my other post: [URL] ...
View 1 Replies
View Related
Feb 27, 2013
recently I bought MS Industrial wifi mice. When I plug adapter to usb port on my Inspiron 5520 it says "Device not recognized" . Then I put it to another port ( I have 4) it says the same message. I plugged it to first port again, and it works.
When I put laptop to sleep or when I shut it down and when I wake/turn it on my mice doesn't work . I plug adapter out, and plug in again, the same message .... "device not recognized"
View 8 Replies
View Related
Feb 28, 2013
I have a inspiron 15 laptop and keep getting a message "USB not recognized. The USB device attached to this device has stopped working or windows doesn't recognized.." thing is there isn't a device attached to the computer when I get these messages.I've updated the BIOS, driver updates etc and still get the message.
View 1 Replies
View Related
Mar 25, 2010
My computer was working fine last night, shut the lid and went to bed. Woke up hit the power button and I have blue screen. Restarted and now have blank black screen. I have a XP cd I try to put it in and nothing happens. I want to boot by cd but it wont. Cant figure out how to get into setting to change order for bios. I hit F8 and that works and tried all the options and no go, still blank black. I would wipe it out and start over If I could. Nothing new was installed. It was fine last night and today it woke up nasty!?
View 10 Replies
View Related
