I have a Dell Latitude E6530 and when I plugged in my monitor and keyboard into the docking station, they were not recognized. But I can plug them into the laptop while docked and they are recognized.
View 1 RepliesI was recently given a Latitude E6530 and I wish to upgrade the standard keyboard to a backlit one after coming from a MacBook Air. I was wondering, does E6530 (or it's similar models) requires an additional cable to power the backlight or does it just feed off the single cable? I've scoured YouTube and Google to try find out if an extra cable is required for this model however wasn't able to.
View 6 Replies View RelatedI just found that my E6530 keyboard bends a little in the left upper corner. When i push a little bit harder the A or S or D key, the keys around move a little bit.
View 3 Replies View RelatedThe laptop wont turn on when its plugged in it says it's charging then when i attempt to turn it on it sounds like its booting up but within about 3 seconds it shuts off without the display ever turning on the LED light showing the battery is charging then begins to flash and the other 2 LED lights stay on. I was on the laptop not even an hour before this happened until it died and it hadn't moved after that so I'm not sure whats causing the issue.
View 4 Replies View RelatedI have got a Latitude E6530 laptop with an Intel quad-core i7-3720QM CPU and 8 GB RAM.
The strange thing is when I use Firefox (with not more than 6 tabs) specially using gmail, after a while scrolling and browsing become very slow; even typing become slow. As I wrote the laptop is one of the latest generation. I can not realize where the issue could be.
I get new E6350 laptop. Installing some software,After last boot Now asking BIOS password. I know 100% that I don't set master password,
View 9 Replies View RelatedI got a Latitude E6530 with an E-Port II a few weeks ago. In general it's great but I have had one annoying problem a few times:
The laptop is docked with the lid closed, and two external monitors, and an external USB keyboard and mouse connected. It's running Windows 7 Ultimate.
The laptop goes into standby after a few minutes of inactivity.
When I press the power button on the dock to resume from standby, the external monitors stay in standby mode and the mouse and keyboard don't power on (no num lock light or laser on the bottom of the mouse).
If I undock the laptop and open it, the screen stays off and it doesn't respond to keyboard or touchpad input, even after several minutes. However the power light is on and the hard disk light occasionally blinks. The only solution is to power off the laptop by holding the power button for a few seconds.
Note that this doesn't happen every time that the laptop is woken from standby, it's only happened 3-4 times in a month. The Windows logs don't show any errors either.
I have a Latitude E6530 and I'd like to upgrade the resolution to 1920x1080. What cable and LCD part # (or compatible) do I need? The panel is easy enough to replace but I have no idea about the LCD cable.
View 9 Replies View Relatedwho has an E6530 with BIOS rev A07 test to see if the 'Custom' charging mode functions properly via the Battery Information application that is installed with the Dell Feature Enhancement Pack ? The Battery Information application worked properly prior to the A07 update.To test:
1) Reboot
2) At the DELL logo press F12
3) Select 'BIOS Setup' from the pre-boot menu
4) Select Power Management, then select the 'Primery Battery Charge Configuration'
5) Select the 'Custom' option (Write down which option is selected before you make the selection so you can restore this setting later)
6) Set the 'Custom Charge Start' value (e.g. 50, NOTE the BIOS will not allow a value less than 50)
7) Set the 'Custom Charge Stop' value (e.g. 75, NOTE: the BIOS requires this value be 5 greater than the 'Start' value)
8) Click 'Apply', then click 'Exit' and let the system boot into Windows
9) Launch the Battery Information application by performing the following steps:
9.1) Press the 'Windows' key
9.2) In the 'Search Program Files' search box type: 'Dell Battery Information'
9.3) Click on the 'Dell Battery Information' link in the search results
10) When the Battery Information applications starts, verify that the Charge mode displays 'Custom' (see figure )
11) Click on the 'Change Setting' button
12) Verify that the 'Custom' mode is not listed (see figure)
13) Verify that the 'Start' and 'Stop' values which are set in BIOS are NOT correctly displayed, and that you are unable to change the 'Start' and 'Stop' values.
14) Restore your charge configuration by selecting the Charge mode you wrote down in step 5
15) Click save
Using Dell Clent System Update to update a Latitude E6530. All drivers are updated now except the Intel Chipset Driver. On Windows 7 64 bit. Framework version of the driver is 3.0.921.
The error message that it gives is Update package digital signature is invalid - status: Failed Error Code 7
Not sure how to remedy this.
I am trying to install this driver update hoping it will remedy a black screen with cursor when logging in. It takes about a minute to login and then the desktop finally appears. Was taking quite a bit longer to log in before I updated the other drivers and then removed McAfee to see if it was eating up system resources.
I reimaged my client's laptop and I am trying to download the drivers for the Universal Serial Bus Controller. I went on the dell website and tried downloading it but it still shows up as missing.
Operating system: Windows 7 x64
I was also wondering if dell has put the correct drivers up for the operating system. I select Windows 7 x64 drivers on the webpage. When I try to install them, it gives me a "invaild operating system" error.
all of a sudden my touch pad stopped working?
View 1 Replies View RelatedI'm trying to install Ubuntu on an e6530. I changed a BIOS boot setting from Legacy to UEFI. Now the laptop doesn't even show me a BIOS screen at startup. The screen is backlit, so power is on, but shows nothing. The drive light flickers a few times, but no matter how long I wait, nothing appears.
I can't even switch it back to Legacy because I can't get into the BIOS. Hitting F12 after power on does nothing. Is there some way to get it back to Legacy mode? Or simply reset the BIOS to default settings?
My studio 1737 laptop always says its plugged in and not charging. I had the original battery in and on boot up the bios says that the battery is not recognized if I unplug the laptop with that battery in it automatically dies. I also purchased another battery online I get the same error on boot but this battery actually has a charge straight out of the box so the laptop will run if I unplug it. However, the battery will not charge. I also bought a new official dell charger since the after market one gives me an error on boot up. I have also replaced the CMOS battery because I was getting an error on that too and the clock kept resetting.
I currently have the new battery, new official dell charger, and a new CMOS battery installed and the battery still does not charge. What could be causing this?
My laptop's USB ports are no longer working. I believe that some internal circuitry got fried after I plugged in a USB powered device that had its own power supply. I don't remember exactly what I did because it was while ago. I still like to use the laptop, but without USB its uses are quite limited.
When I plug in a device, nothing happens. It is neither powered nor recognized. All USB ports are affected.
My XPS 17 laptop sometimes beeps continuously with the sound of something being unplugged or plugged into the USB ports, but this happens when nothing is connected. Occasionally, a message comes up saying that USB device is not recognised - which makes least sense when nothing is plugged in. What is causing this - perhaps a setting on the computer - or perhaps a solution?
View 6 Replies View RelatedI receive there is 1 weeks ago a M6800 laptop with his port replicator. When the laptop is plugged to the port replicator and I press the power button (on the laptop or on the port replicator) the laptop starts but it is frozen immediatly and the big "DELL" logo is displayed. I do not see Windows starts screen and I can not enter in the BIOS.
If I unplugged the laptop from the replicator station, it starts immediately and it is work.
If I plug the power charge on the laptop it starts immediately and it is work.
I plug the laptop to the port replicator, I starts it, the starts process is frozen of course at the "DELL" logo. After that I unplugged the laptop (I do not shutdown it, so the laptop is still on), the laptop continue to starts until Windows. After that I plug the laptop to the port replicator and it is work...
So I think the problem come with the port replicator detection at the BIOS level...
I am thinking on purchasing a SP2309W for my M4400 but i don't know if it will fit the E-Port Replicator Plus with the E-Monitor Flat Panel Stand
what I would like to know is if anyone knows if it fits the stand (the monitor is VESA compatible?) and if the 4400 will support the max resolution of the monitor (2048 x 1152) and if I need special cables for this.
We are having a serious problem with the battery that we replaced for one of the Dell laptops. The Laptop model is Dell Latitude `E5530. We were getting a message that the Battery has to be replaced and we bought this battery from one of the third party vendors.
It ran for 2 weeks and now it comes up with some weird messages. The laptop isn't detecting the battery at all. We had sent the battery back to the vendor but he says the battery works fine at their end.
Just tried to use my SD reader on my D4300 which I have had almost 2 years. It was upgraded from Vista Business to Win 7. The SD Card reader is not recognized at all!I I rebooted to look at the config, and it is checked off in the configuration. I have gone back through the Dell drivers area and do not find anything specific for the SD reader....
How to make this SD Card reader work?
Dell D610, reinstalled Windows XP. Downloaded NSS from Utilities disk and the rest of the drivers from USB drive saved before re-install (C:Dell/Drivers)
The drivers are not being recognized by the computer after several restarts. Thsi my first reformatting of Disk. I would like determining what is causing the problem.
I reinstalled my D620 from scratch (ie. formatted the disk) and reinstalled from the Dell supplied XP Pro media CD. I downloaded and installed all the relevant drivers. I have Intel wireless working, the nVidia card working at 1440x900 etc ... However, I can't seem to get the power/battery management to work. The D620 shows its battery light as green when the AC power is plugged in and the physical battery button lights up all the LEDs when pressed when the battery is partially/fully charged but neither the BIOS nor XP Pro recognize the battery.
Similarly, when the AC power is disconnected the battery works fine by itself for x hours but the power cord icon remains in the the taskbar and the battery light on the laptop glows orange as soon as the power is cord is disconnected. The LEDs on the battery itself however light up when the button is pressed on the physical battery. On reboot the BIOS also does not recognize there is a battery present and not does XP Pro.
In other words, everything works as expected of a laptop - except when totally wireless, how much juice/time I have left in the battery - this is fundamental to any portable device.
A few hours prior to the reinstall both XP Pro and the BIOS recognized the battery no problem and worked accurately and without fault - so I refuse to believe this is a bad battery. Somewhere there must be a driver to enable the BIOS and XP to recognize the battery ?
The battery works and both XP Pro and the BIOS were well aware of its existence prior to the reinstall a couple of hours earlier. All I did was to format the hard drive and initiate a totally fresh install of XP Pro - and installed the drivers downloaded from Dell based on the Service tag of the D620.
I'm hoping this is in the right area.
I have a Dell Inspiron 9300 It's upgraded about as far as it can go. I use a desktop for the occasional gaming or rendering but this is my daily driver.
The issue. I took it apart the other day to see if my screen hinge could be replaced and to install a DVD burner. Now it no longer recognizes the onboard/integrated keyboard. It still recognizes the touch pad but not the keyboard. I went as far to buy a whole new OEM keyboard. Still nada.
having issues with my Dell Latitude E5440. The BIOS does not recognise it, I tested the HD with a external caddy and it works fine. I messed a lot with BIOS thinking it could be a settings but had no luck.
View 8 Replies View RelatedHaving problems with the cursor, I have tried various Drivers but to no avail, so i replaced the Palmrest and the problem still exists, The bios recognises the Touchpad, can't figure out were the problem is coming from.
View 3 Replies View RelatedI'm on my second XPS13 (9333) because of a keyboard latency (lag) issue. I've found that if the AC adapter is plugged in there is no lag. When the AC adapter is NOT plugged then the problem occures.
The keyboard has no problems in Safe Mode. Dell sent a USB to reload the OS but that did not fix the problem. I've heard from another poster (different site) that Dell replaced the MB, SSD, CPU and that did not solve the problem.
Recently my laptop suddenly shrunk the display down to 1024x768, even in BIOS and when starting up. In Windows, the monitor is recognized as "Digital Flat Panel, 1024x768, 60Hz". Here is a photo I took with my mobile phone:
HP Pavilion DV4T-1400, with Intel GM450 graphic card.
I did customize the bios, but Wake on Ac is not enabled.
What is occurring is if we leave the laptop not plugged into an AC adapter overnight, the next time the laptop is connected to the ac adapter it will turn itself on. This occurs even with the lid closed.
I suspect the problem is coming from the Auto on Time in the bios. We have the Auto on time set to 12:01am (local). My suspicion is that if the auto on timer is missed, it is turned on at the next possible moment.
Is there a way to set the machine not to auto on if it misses the auto on time?
We are using the A09 bios version, and below is the ini file taken of bios settings from the cctk. (minus the service tag.)
[cctk]acpower=offadmsetuplockout=disableasset=autoon=everydayautoonhr=0autoonmn=1biosver=
A09bluetoothdevice=enablebootorder=legacytype,+hdd,+embnic,-floppy,-usbdev,-cdromcamera=
enablecellularradio=enablecontrolwlanradio=disablecontrolwwanradio=disablecpucore=
[Code] .....
I just opened up my HP Pavilion Touchsmart 15 Sleekbook and I want to connect a 2nd monitor to stretch my desktop. I have a Dell monitor that I've been using for a year or so with a VGA connection. On my new Touchsmart there is no standard vga port.
In what ways can I connect it?
I am thinking of getting the Dell UltraSharp U2713HM external monitor and use it with my y510p Lenovo laptop. My question is: Is there any way to get the 2560x1440 resolution out of the monitor using only VGA or HDMI port of this laptop?
View 9 Replies View Related