I have a 9300. Is it possible to hook it up to a desktop and use my keyboard and screen to operate it instead of a separate keyboard and external monitor?
View 13 RepliesI'm hoping this is in the right area.
I have a Dell Inspiron 9300 It's upgraded about as far as it can go. I use a desktop for the occasional gaming or rendering but this is my daily driver.
The issue. I took it apart the other day to see if my screen hinge could be replaced and to install a DVD burner. Now it no longer recognizes the onboard/integrated keyboard. It still recognizes the touch pad but not the keyboard. I went as far to buy a whole new OEM keyboard. Still nada.
Long ago (A year ago lol) I bought the Gateway FX gaming notebook. It was a great PC and could not beat the price with the hardware and performance it offered, however the screen was really bad.
At first glance it wasn’t, 1080p res and good brightness level, but when I plugged in my old external LCD monitor to dual screen, I was floored. My 4 year old desktop LCD screen was almost better in every single way.
The Gateway’s colors were dull, muddy, and dark, no matter how much I recalibrated the screen, I could not get it to look anywhere as good when compared to my Samsung screen on my desk.
I have an old desktop computer that I want to try to get running again. Is it possible for me to hook up my Dell E1705 to the tower so I can use it as a monitor?
My e1705 is about 3 years old.
I have the Pavilion g7-2235dx with Windows 8.1 operating system. Nearly every automatic update messes up my ability to get on the internet. The only way I can connect is to uninstall all of the updates. The icons on my desktop also stopped working. When I click on them, it goes right back to desktop. Can't pin them to the taskbar either. The ones on the taskbar won't open by clicking on them either. Have to right click and tell it to open. Also problem getting my Norton anti-virus to open. Says it working but can't open it.
View 4 Replies View Relatedis there any good speakers(5.1) with spdif so I can hook it to my m1730..
I have 5.1 speakers but does not support spdif and I have a lot of wires and I want to get rid of them asap so am looking for good 1s with spdif...
is it better to hook the spdif or use the normal jacks(speakers+line out+mic), can u tell me if there is any differance between them please?
I haven't visited in a long time, not since getting my 9300 a few years back. Since then, the screen has crapped out and is blank. I get nothing.
I have acquired an ibook G4 and an external monitor recently. I need help with these options to be able to either connect the external monitor or be able to transfer files:
1. Connect the external monitor to the dell 9300 with the vga connector. i tried that. i am using an external keyboard for the dell since the dell's keyboard crapped out too.
the external has no 'fn' key, but i read i can use 'scroll lock + f8' to switch to the external monitor. doesn't work. any suggestions on how to switch monitors without being able to see the dell's screen?
2. Firewire. If I cannot get the monitor to work, then I want to try this. I am new to firewire, but i read it is possible to transfer files from the pc to the mac. Is it possible to transfer files though if one screen is blank? Could I see the dell's output on the mac screen somehow .....
our Dell 9300 has these stripes since 6 month. I guess it is the Ram on the X300
but i although have read this could be an issue of the LCD.
Who has experiences and can tell me?
Hope you can recognize it on the pics.
Btw, i mean the vertical thin coloured stripes on the right side of screen. Others are reflexions from cam.
I moved my WUXGA 9300 screen to my new M90. It works okay and looks gorgeous, but it's 'off' position is solid white. Meaning when the screen turns 'off' it goes to solid white.
Anyone know why this is happening or what I could do?
I'm running the A08 Dell BIOS and I have a Quadro FX 1500m.
What do I need to hook up a Macbook with a regular TV (not HD)?
Would either of these do it?
Mini DisplayPort to VGA Adapter
Mini DisplayPort to DVI Adapter
in the past few months i noticed some minor screen snowing that went away with time or repower of the system. while using pc tonight the screen all the sudden crapped out. don't know if i should replace the part or just sell it as is for scrap
the bar also changes color and is there regardless (bio, safe mode, normal ...)
i haven't hook it up to an external monitor because it's kind a hassle this late but will try tomorrow
bios still a04 since the battery died 4 year ago and i'm too cheap to buy one since it's plugged in 24/7
My 9300 has an issue that I'm hoping someone can help with.
When I boot as normal into XP there are broken lines on screen like electrical interference and then when XP tries to start the screen goes black.
When I boot into safe mode the screen is fine but obviously not at 1900x1200 resolution.
I've noticed my graphics card fan is not spinning so I'm assuming the card wont run at 1900x1200 when it senses the fan has died ?
I'm trying to repair a 9300 with a radeon x300 video card in it - after the LCD panel died.
I've tried two panels to replace it, a WUXGA and a WXGA both from a 9400 - both panels are tested, and known to be absolutely working, as are the inverters.
In the 9300, the LCDs work, but the backlight doesn't come on, so they are effectively useless. I've tried them with all combinations of inverters, the ones specifically for those screens, then swapped around, and then changed for the original 9300 WUXGA inverter - nothing makes any difference, even though all parts are tested and working in a 9400.
The machine works fine with an external monitor, and in-a-sense works fine with the LCD panels - the output is working fine both ways, just not the backlight.
I've just never heard of a backlight problem on the card, only ever the inverter or backlight. The fact that the card was working fine before the old panel died also makes me doubt a problem there (and the old panel was an LCD problem, not a backlight problem).
Unfortunately, an LCD panel with no backlight at all is unusable, as it's almost impossible to see anything at all - much worse than a dim backlight. You have to hold it at the right angle, in the right lighting conditions, and squint
I've just tried flashing to the latest A05 system bios, and the latest ATI video bios from Dell, and that hasn't helped. Is there some good reason that 9400 panels aren't compatible with a 9300, or have I got a video card with dead backlight output?
The video card is the only thing I can think of, but it was working fine before the old panel died, and I've never heard of symptoms like this.
I don't have a working panel from a 9300 to test with, and can't afford to risk buying another panel, also replacement cards for the 9300 are like hens teeth.
I have a Canon Powershot G5 and I am trying to connect this to my Sony Laptop.
The camera uses a 3.5mm AV cable but I am unsure where to plug into the laptop. In the yellow female port on the back? And I do not know what cable to use. I cannot find a male to male Audio Visual cable.
what's the best way to hook it up to my HP w2408h Monitor.
The monitor has Digital (HDMI with HDCP) and Analog (15-pin D-sub VGA) inputs. What adapter would I need to get from Apple to get the best possible picture.
Also, I have a 37" Panasonic Vierra TV, it also has HDMI input but my MBA doesn't, the TV does have a VGA port, is there a way I can connect to my TV with one cable a get both video and sound.
I have dell inspiron N5050 laptop and it is under warranty. Recently i formatted it to upgrade my system from 32 bit os to 64 bit os. After formatting, I am not able to access my desktop and a blue screen is displayed that says:
"A problem has been detected and windows has been shutdown to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:
The BIOS Â in this system is not fully ACPI complaint, Please contact your system vender for an update BIOS.
Technical Information: ***Stop:- 0X000000 A5 (0X000000X11,0X00000003,0X00000000,0X00000000)"
I have an Acer Aspire 5360 with a screen problem. There is a thick stripe of the screen on the right hand side that does not show the desktop. I have changed the display settings resolution, reinstalled the intel chipset driver which I updated on the intel site. Reinstalled the OS XP, reset the bios to defaults etc.
View 4 Replies View RelatedScreen on aspire E1-522 is dark but I can see desktop very faintly. do I need to change the back light or inverter and if so, are there any tutorials or videos around ....
View 2 Replies View RelatedI am playing a game or watching a movie in Fullscreen, randomly it minimizes to desktop and I dont know what is causing this issue. I restore the window to Fullscreen again and everything is normal.
Â
Points to note here -
1) It is completely random, happens once in couple of hours.
2) I use my laptop connected to a TV using HDMI.
3) I use USB mouse and keyboard (which have never been an issue with my old laptop)
4) I play Origin and Steam games and it happens with both of them.
Â
Is there a way to detect, what program might be causing this?
Otherwise, my system is completely stable and works great. Its just annoying, suddenly for the game to minimize when you are about to score a goal in FIFA (or the other way round).
Also, I have the AVG Free Antivirus.I will try to dig through its settings and check What can I disable.
Product: HP ENVY TouchSmart 15t-j000 Select Edition CTO Notebook PC, Model C9G48AAR, Product Number: C8P45AV
Problem: After logging in, the screen flashes the Start Screen on and off in random fashion, and is unresponsive to any input.
Effort: We followed the instructions on the HP web site for this symptom (Desktop Screen Flashes Between a Blue Screen with a Blank Taskbar and a Desktop Screen on Startup (Windows 8)), but it failed at step 8 - the Start Screen flashes in Safe Mode with no way to find or enter the "Control Panel" step.
We have also rolled back the system to the last restore point, reseated the memory, and reset the BIOS - all HP recommended processes for video problems.
Current Status: We always look to resolve any problems via the HP web site first; this one had us stumped.
I have just bought my G62 laptop and have pretty much no complaint except the backspace's bounce seems to be a bit off and a little loud. However, I seem to notice this weird dimming issue when I set my laptop to either Power Saver or HP Recommended mode. When I go from the internet browser to the desktop and wait like 3 seconds, the screen seem to dim just a tiny bit. Sometimes it dims twice. Most noticeable when using the lowest brightness level. It's really bothering me, does anybody know what it is? It's not the auto-dim feature, because it dims in like 3 second. It just flickers a little bit.
Also, when I move a browser or window up and down, I can see this fuzziness on the outline of the window, including the outline of the search bar. I updated the display adapters, I have Intel HD Graphics display adapters.
My specs are:
i5-430m
4GB
Windows 7 64-bit Home Premium
I just got my new hp pavillion dv7-1000, it loaded up and i did all the registration stuff before you actually get to using the laptop but as the vista desktop loads up i closed to lid and it put the laptop on standby.
Now when i try to turn the laptop on i get to the log on screen, put in my password, it loads up and then i get a blue screen with my mouse cursor but no desktop icons or anything. I can still do control-alt-delete but i just cant see any of the other stuff.
I then booted in safe mode and i could then see everything but it looked like windows 98 not vista,
I have a HP Pavilion dv9500 notebook and yesterday after more than two years of pretty much running smoothly it wouldn't boot. First it actually booted into windows but the whole desktop screen was frozen with mouse cursor. So I turned it off, turned it back on and it booted into blue screen and restarted itself. After couple of tries I booted into safe mode which was running fine.
I wasn't sure what the problem was but I was thinking it must be software related, so I loaded an image of my system which I've used before and knew was ok. But even after putting a brand new OS it was doing the same thing.
One time I was actually able to boot into normal mode so I thought maybe the issue got resolved magically. But, I have my external monitor plugged in and even when in normal mode the signal wouldn't go through, so I had to use my laptop monitor. I kept trying to switch the signal and even though it was showing the icon like it's transferring nothing happened. So I checked my video card properties and the card all of the sudden had no drivers and was basically unrecognized by the OS.
I have Inspiron 9300. Unfortunately, my geforce 6800 died and I bought as a replacement x300 which was installed by a laptop repair service (they fixed other thins too.
It was due to power surge). Everything works but when I boot up the computer or when the display is set to be turned off in the power settings in Windows instead of being actually turned off the display is on and is all white.
Also brightness regulation does not work via Fn +arrows keys and is set to maximum and the white color is so intense that I get a headache after a couple of hours staring at the screen.
Every time I press caps lock, change volume i got  a notification pops up that often messes up the window focus. It's particularly annoying when trying to play games. Can I turn this off?
I searched around for other people having the same problem and the one solution I got was to change Hkey_Local_MachineSoftwareWidcommBTConfigGeneral KeyIndication to 0, but that's already set to 0 for me, and I'm still getting notifications. The solution with removing "lockkey.exe" is not working as well. I just don't have program like this.
I noticed that i have small marks on my screen which match the layout of the middle of the keyboard keys.
It is impossible to see these marks when the laptop is turned on.
However when off and with the screen open, tilt the laptop away from you so you can just about see the underneath of the laptop.
At this sort of angle i can see little imprints on the screen. Luckily they dont appear to be scratches, just stubborn marks that eventually rub off. ,
I noticed the keyboard is disabled the moment you unlatch the screen. Is it possible to only disable the keyboard when the screen has done a 180 and is locked in the other orientation?
View 4 Replies View RelatedKeyboard -[url]
Screen - [url]
Ill most likely be ordering both soon once i secure the funds. Protect Your Investment
In Windows 8.1, the on-screen keyboard pops up whenever I select a text input field, even when I am using it in laptop mode. This is becoming quite a nuisance.  It wasn't a problem before I 'upgraded' from Windows 8.  Â
View 2 Replies View RelatedI prefer the Comfort On Screen Keyboard Pro and have installed it. After every sleep or reboot I have to manually disable the standard Touch Keyboard from Toolbar entry on the Taskbar.
View 4 Replies View Related