I have had this computer for about 6 years- all through college. I've had an issue where my disk cleanup doesn't work for a while, but it has just become serious enough to worry about. My disks are full! How do I clean them up. That's the first of the problems we'll work on.
View 3 RepliesAfter hard disk failure on my dell inspiron n5030 i copied two first partitions from my old hard drive to a new one using Acronis disk director. But when i try to use ctrl+f11 to start the recovery procedure the procedure doesn't work.
I also tried decompressing the factory iso file to Os partition and when i tried to start the pc and boot with Os partition as active it didn't work.
I just had a new motherboard installed in my E1505 under warranty by a Dell Tech. They sent a new hard drive with it, with Windows XP already installed. I also still have my original hard drive. After the motherboard finished installing, my Standby no longer works...
actually it goes into Standby, but immediately wakes up, without me touching a single thing. Also, I can't lock my computer by pushing the Windows logo + L. Using that shortcut actually logs me off the user. I tried this with both the new hard drive and the old original one. Both of these things worked fine with my old motherboard.
I did a clean install of XP on the new hard drive, and still it doesn't work. So far the Dell tech that I've been talking with online and on the phone doesn't have the answer. I've been talking to him for several days now
can i make the partition for hard disk without formatting the disk . Laptop model is dell Inspiron N5110.
View 1 Replies View RelatedI have a Dell Vostro 3300. Windows 7 OS. Hard drive went out. Replaced hard drive. Reinstalled Windows 7. Used backup system disk that I made with Recovery Manager back in December 2012. It looked like it was working properly, but after using all backup disks, got message image could not be applied. Started over, reinstalled Windows 7. Put in #1 backup system disk. When drop down box is displayed asking which backup to use, I choose 12-29-2012 like I did before. Nothing happens. It just sits there. Next button can not be used (it is greyed out).
View 1 Replies View RelatedBought 5530 in August but already need to run recovery disks as the photo gallery constantly crashes and using restore to an earlier date does not work. I burnt two DVD's when I got it and they looked OK. However after changing start up in BIOS to dvd drive then restarting holding down f8, when pressing the complete restore tab nothing happens except a message saying no restore dvd or HD can be found. Cannot think what to try as the disks and dvd drive appear fine. I wish they included the disks with machine like sony do then you would be 100% sure it is not the disks at fault. Anyone else encounter this? I am sure the problem with the photo gallery is not a virus as I do not use the machine on the internet
View 6 Replies View RelatedIs there any freewhere Mac program that helps you look through your Mac for things that you might want to delete that could be slowing it down? Bits of programs you installed, things you've downloaded etc?
Also, I thought that Macs don't keep a registry of websites you've been to? But they show up in spotlight searches, is there any way to get rid of the files so my computer doesn't keep them?
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
My Dell Inspiron has a problem, everytime i connect the power supply to charge it while its on the monitor will completely black out on me... Has anyone had or heard of this problem before?
View 10 Replies View RelatedThis is a somewhat new problem but I'll be using the computer for anywhere from 10-30 minutes when I can hear the fans go on and the computer will slow to a crawl.. from like 1.7ghz to something like 900mhz... just slows down really bad. It's got a pentium dual core in it .....
View 5 Replies View RelatedI just removed the LED dashboard cover and then the keyboard in a LATITUDE E4300 and used some compressed air for a simple spring cleaning. after I carefully put everything back together, the following keys stopped working 9 O L .
I repeated the process a couple of times to make sure I didn't make any mistake, but still those keys don't work.
I have an HP Pavillion dm4. My hard drive died so I installed a new hard drive. The original OS installed on the computer was Windows 7. I did not get a Windows 7 disk with the computer. If I order the Windows 7 recovery disk from HP, will it install Windows 7 on my new hard drive? I have the COA info.
View 3 Replies View RelatedI have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?
View 1 Replies View RelatedI have E1505 and my battery decided to die today.
I have a simple question. Does anyone tried out those generic 9 cells battery for inspiron 6400 (E1505)? are they any good? most of them (made in China).
I ask this question because they are really cheap (90$ for 9 cells and 60$ for 6 cells) compared to genuine dell batteries (289$ and 160$).
in addition dell genuine batteries for inspiron 6400 are really bad (doesn't last beyond one year), so it is a waste of money to buy these expensive batteries.
My computer has the Intel Pentium T2080 processor. When I talked to Dell, they said that it couldn't be replaced but I noticed that it comes out of its standard PGA478 slot easily.
I would hate to spend the money for a new processor without knowing that it will work, so my question is will a core 2 work? If not, would a Pentium from the T2000 series such as the T2130 (the T2080's closest relative) work?
My issue is that last week I noticed that my touchpad (mouse) moves erratically (shaky), not very smooth when moving around.
I thought it was a virus so I reinstalled windows 7 and installed all the drivers and so fourth .....
I have a Dell Inspiron e1505 that is a couple of years old. I just bought it from a guy at work and it seems to be working pretty good.
I do a lot of photo editing and while I realize this is not a top machine for this, it works better than what I had. It now has 1G of memory in it and I think that I can up that to 2G max.
What should I be looking for and where is the best place to get it? I would like to buy local, but that may not be the best option as far as price goes.
I just found this site and signed up. Looks like some good info here. I have a couple of questions if you all don't mind.
I just bought a gently used e1505 from a friend at work. He just got a Macbook Pro.
The laptop seems to be working great so far. I am replacing my tower at home with this and am trying to figure a couple things out.
1. I have pair of Boston speakers with a sub that I used with my tower. I remember that in the audio settings, there was a box to tic for "Digital Output" and I had to tick that box to get the speakers to work.
I cannot find that box on the e1505 and I cannot get the speakers to works by just plugging them in. What am I doing wrong here?
I had Windows 7 on Inspiron E1505, it was getting slow So I installed clean Windows 8.1.But even after installing Windows 8.1 I see sometimes CPU usage go over 90%. But CPU and Disk usage come back to around 50% after sometime. I see usage shoots to 90% when I open new tab in chrome or IE. Most of the CPU and Disk is used by Chrome, System, Service Host: Local Services / Network Restricated.
View 1 Replies View RelatedI'm running stock 2x 512 mb 533 Mhz ram right now.
I would like to upgrade but I can't find information about my motherboard ANYWHERE. It's not listed on the dell system specs website, either.
So, my question comes down to which would be better:
PC-5300 (667Mhz) ram with 4-4-4-12 timing or PC-6400 ram (800Mhz) with 5-5-5-18 timing?
What is the maximum speed of memory that the e1505 can use? If it's 667 Mhz, I'm of course going to go for the ram with faster timing, but if it's 800 Mhz then I'll go for the speed. I'm using a 2.0 GHz core 2 if it matters, and all I could find it bios is that it's a mm061 "system
So I'm planing on reformatting my E1505, but I'm faced with a daunting problem. My laptop screen is broken.
This is the first time I'm reformatting on my own and I'm worried that the broken screen would cause a problem. The monitor I have hooked up only starts showing things from my laptop after the boot up process gets to the blueish screen that says Windows is starting up.
If I were to go into the installation menu, is there a way for me to get it to appear on my external monitor instead of the broken laptop monitor?
My mother's Dell Inspiron e1505 needs a new battery. However, after she did research, she said that the OEM Dell batteries are really bad, and that 3rd-party options (such as Rayovac) are better.
I've always been told the opposite--that the OEM batteries are the best.
In the forefront we can see the hinge, and in the background we can see the piece behind the hinge (PBTH) - I have no idea what to call it, so from now on it will refer to it as the PBTH. =)
Ok, the problem I've had - for years - is that the PBTH does not stay where it is supposed to stay.. the three plugs do not stay in their holes. This has caused the outer plastic part of the LCD cover to split when I close the lid.
After a few years of this, the bezel cracked on me... so I decide to get a new bezel, and I tried to fix the hinge problem.
I'm not sure what mechanism was used to keep those 3 prongs in their holes, but I was going to try contact cement (for a lack of better ideas) - if you have any other ideas, please let me know.
But now my problem is this:
Last night I glued the PBTH into place, put everything back together..tried close the lid - was met with major resistance - and the glue/PBTH bond broke.
Question, I have both a Latitdue D620 which I upgraded the RAM to 4G and the Hard drive to 320G. But I also have an Inspiron E1505 with 2g of RAM.
I want to give one of my laptops to my father because he doesn't have money to purchase a new one. Which one should I give to him? I really like both laptops. please give me your honest opinion.
I'm currently using a Dell inspiron 6400/E1505 notebook although i wish to upgrade to a studio 15 or 17 i cannot afford it at the moment i can however afford to upgrade the notebook i have a little bit more, the 2 upgrades i'm considering are,
Upgrading the RAM to 2 x 2gb (I spoke to someone on these forums a while ago about it and apparently it is possible) but i'm unsure if its worth it because i can't see anything that'll be different enough to warrant the upgrade .....
I have an Inspiron E1505 with a Sony DVD+-RW DW-Q58A cd/dvd drive. I THINK I have a firmware/driver issue with it because of a weird problem I've been having lately.
I noticed a couple times when running the DVD-ROM of a new game, the disc spun up really, REALLY loudly. And, the disc won't autoplay (I don't know if that's related to the cd drive or not...autoplay hasn't been working for a while, now). For the most part though, the disc spins-up normally and the game runs just fine. The problem comes up everytime I quit the game -- the screen goes black as if going back to the desktop but seems to freeze .....
I DID search but found conflicting information.
I have a Dell here that I just picked up free due to having a busted screen and a bad battery. Luckily I have a HUGE pile of dead laptops and had these parts!
The laptop says Inspiron 6400 on it but the service tag shows up as a E1505 on Dell's site. The service tag is 4Q38YB1 if that helps.
I put two 1gb DDR2-800 sticks in (though it comes up as 533MHz) and a 120gb SATA drive in.
my inspiron E-1505 that I haven't used in a couple months won't boot. It has power and is charging the battery. The battery is okay. I get lights on the unit when I push start but nothing past that. If the cmos battery was dead would it start anyway? I took the HD out and put it back in. I get nothing on the screen and no sounds at all. The led's on the MB all flash during start.
View 2 Replies View RelatedTrying too install windows 7 ultimate using Acer recovery disk's,it's hanging up everytime at ( installing cleanup 43-44). It's a 8951G-9630 Acer aspire.
View 4 Replies View RelatedI had to uninstall the current driver. After this it auto installed the old ati driver.
I uninstalled this one as well leaving me with the bare bones driver that comes with windows. After installing the modded driver again and restarting it began to work again................................................