Dell Inspiron N5110 :: Screen Replaced But No Display?
Mar 19, 2013
I have a dell inspiron n5110 laptop that was recently slammed to the floor because of some crazy incident. Anyways, the screen shattered so i replaced the screen and attached the cables properly. The laptop powers on, but no display on the screen what so ever, its completely black.
I did the take out the battery and power cord, held power down for 60 sec. that was a no go
I don't know what could be the problem. I even hooked the laptop via hdmi to my tv and it works fine on the tv so i know the laptop is working. Also my warranty expired so that won't do. would really like to resolve this issue without forking over a couple hundred bucks.
I've finally managed to find someone to replace my optical drive with an SSD (wouldn't want to void the warranty, do we?) and I've got quite bit of a problem here. After installing Windows 8 on the SSD, I get the error "winload.exe missing or corrupted" and error code 0xc000000e. The installer automatically put the boot data on the original HDD, while the OS is on the SSD - and it seems the UEFI can't find the OS like this.
The OS itself seems to be intact, since pressing F12 at booting and selecting Hard Drive starts the computer normally.
I've tried to move the boot sector to the SSD, but it seems I'm missing something... Would a BIOS update maybe work with this?
I bought inspiron N5110 laptop from about 8 months from middle east. From 5 months when I came to USA the laptop stop working. I tried to send it to dell as it was still in the warranty but they refused to take it because it had not an international warranty. I sent it to a technician in USA who told me that the motherboard is overheated. I got a motherboard that has the same part number and install it in the laptop.
The problem is that when I power it on some times the screen not display anything although it logs in windows as I hear the sound, and sometimes it log to windows and after about 15 min the screen stop working.
I do not know why it do this is this a problem in the new motherboard? or in the CPU?
I've dell Inspiron N5110 and I'm using it since past 3 and half years. In 2013, base of the laptop was broken and I had to replace it with a new one though there was no problem in hardware at all. Soon after the dell representative installed the new base and left my house I was facing a weird problem. When I power on the laptop, my screen gives a mild flash but does not start (6 out of 10 times, not always), but I can hear windows start up sound in the back ground. I use to press power button again to lock or stand by the laptop and then move my mouse. After performing this I can see the screen glows and log on screen shows up.
I was using my laptop like this for past 1.5 years as pressing a power button was no big deal. Today on the eve of new year, I saw my trick does not work any more. I was not able to start my screen even after repetitive attempts. But I remember I used it last night, display was really fine.
I bought dell n5110 in 2011.i played many games.last week AW also played.but i got fan problem . (My fan is didnt turn on and lap was shutdown when overheated). Then i remove motherboard and i spin fan some rounds and remove bios battery and re assemble .
then fan was turned on.then i install win 8.1 and install nvidia 340 graphic driver.but when i open nvidia settings display "you are not currently using a display attached to an nvidia gpu" then I tried different drivers-301, 305, 320, 327, 370 but same problem have.
I also tried with win 8 same way. but have same problem.(before having those problem I have installed win 8 and i worked with it) though I remove cimos battory bios didnt reset.
Every time I start up my computer, it flashes the Dell logo loading screen, and then displays this message on a black screen:Intel UNDI, PXE-2.1 (build 083) Copyright (C) 1997-2000 Intel Corporation.
This Product is covered by one or more of the following patents: US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625Realtek PCIe FE Family Controller Series v1.19 (08/10/09)I tried hitting escape or enter but doesn't work. I ran the diagnostics but shows that everything is fine.
I tried hitting f8 to get into safe mode but again nothing.
I am very upset that my expensive Dell laptop has stopped working when it's less than 2 years old. When I turn it on it beeps 8 times and does this over and over Nothing comes up on screen just black? A friend said I need a new board thing as video card is on that.
I have install windows 8.1 Enterprise in Dell n5110 its giving me black screen ,I tried open in safe mode , and uninstall display driver and again restart , i got the login screen after login screen appear for 5 miniutes after 5 min again it goes BLACK ,
My puppy jumped on my lap when I was on the computer and the screen went from horizontal to vertical. A quick fix is changing the screen projector mode from 'not connected' to 'extended'. Unfortunately I cannot use dual screen and have lost my mouse more then once...
I've just dropped my laptop (dell inspirion n5110) while it was on (about a feet) and now it's beeping. I also noticed that the bottom left of the screen disattached, but I was able to put it back in. I understand that 8 beeps mean LCD failure. I've tried to do the test run by pressing "D" but nothing shows up, only a white screen.
few days back dell inspiron's windows got crashed.
I can reinstall But at the same time i will also lose my data.
is there any way I can get the window problem fixed keeping data safe at the same time
Model - Inspiron N5110 Error: windows recovery error initially (Blue screen) but now (Black Screen) which reads:File: BootBCDStatus: 0xc000000fInfo An error occurred while attempting to read the boot configuration data
I tried to use repair option but didnt work as it said there is no system image...
Every time I start my laptop Inspiron n5110, it goes to the blue error screen where it says 'collecting data for crash dump'. It usually happens in under a minute after starting the laptop. Once the screen shows I have to force restart by pressing the power key for few seconds.
I have dell inspiron N5110 laptop with i5 processor and in-built graphic card.When i start my lappy it asks for password and after that it shows a blue screen for about 1-2 seconds. Then either it automatically restarts or after some time a black screen appears like given below:
I have also run diagnostic test and all options are ticked marked EXCEPT hard drive_0
My screen simply blackout in the middle of internet surfing last night 8.00 pm....bought this laptop from JB Hifi and still with warranty...I do not know why...I can
still put it on and continuously emits three beeps at a time and nothing on the screen...need to contact support on Monday and 2 days I am without a computer and just like am isolated...any closest reason for this?
Using Windows 7 on an Inspiron N5110. Get a black screen when system loads indicating a previous incorrect shutdown, with the options to load Safe or Normal. But the system will not accept any of these options, as a matter of act, the system will not accept anything.
I'm pretty disappointed since the whole reason I bought this computer was for photo editing and the RGB Led screen was just perfect. But the Dell rep tells me that they are no longer offering that screen and that they will be sending me a 15.6 inch WLED.
They are still checking with the dispatch people to make sure that they aren't shipping the RGB Led, but I was wondering what my options were? I'm tempted to ask Dell to give me the Studio 17 instead, since it seems to be one of the last Dell computers to offer the RGB Led.
I received a Latitude E6500 with a WUXGA screen with the dreaded screen brightness problems. This is the same problem discussed here: E6500 WUXGA -
The bottom corners on mine are very dark. I had been expecting a little, and had been planning on dealing with it like I have with some laptops in the past, but it's kind of outrageous how discolored they are. Screen brightness evenness is very poor as well, with the bottom part of the screen significantly brighter.
My purchase order lists my screen as: Module,Liquid Crystal Display 15WU+,2CCFL,Samsung Maybach/Avia
How are people getting the exact model number and part number for their displays?
At any rate, it's the bad Samsung kind of screen. A lot of threads including the one I linked to state that there is also an LG/Philips screen that is much better for the same Dell WUXGA screen component.
Has anyone managed to get Dell to change a Samsung screen for an LG/Philips? If so, how did you do so?
My chat rep tells me that they can only replace using whatever was in the order initially.