I was readin a review on cnet last week, and there was an hp and a toshiba laptop with the same stats.. anyway, they did tests and cnet says that the quality of the RAM was probably why the test results were so diffrent.
i don't have a clear conclussion about the max ram that E1705 support. Some guys says that support 4GB and xp reads 3.5, but others says that support 2GB. and some users on this forum, in their signs, says 2GB of ram on E1705 laptops.
i wanna do a upgrade of ram , because i have 1GB. but i don't know if I will be able to put 3GB on my laptop..
I was considering selling my E1705 before but after some research and input from others I came to the conclusion that I should just stick my my E1705 because the resale value is much lower than I expected (I wanted to sell my machine, get a small laptop for mobility and build a desktop).
So now I want to just upgrade my laptop to the max and maybe just get a shitty eee pc as my 2nd laptop to carry around everywhere.
Where is room to upgrade, things I am considering so far to up is a T7600 CPU, 4GB 667mhz RAM, 200gb 7200rpm HD, GTX is a maybe... don't know how much difference there will be. How should I change my choices and what else can I upgrade.
Inspiron E1705, Intel Core 2 Duo processor T7200 (4MB/2.00GHz/667MHz) 17 inch UltraSharp TrueLife Wide-screen WUXGA 2GB, DDR2, 667MHz 2 Dimm 256MB NVIDIA GeForce Go 7900 GS 80GB 7200RPM SATA Hard Drive Microsoft Windows Vista Home Premium Edition Integrated 10/100 Network Card and Modem 8X DVD+/-RW Drive Integrated High Definition Audio Intel PRO/Wireless 3945 802.11a/g Mini Card 80 WHr 9-cell Lithium Ion Primary Battery Dell Wireless 355 Bluetooth Module (2.0+EDR)
I've been having a problem with my computer for the past 3 days, even when i am not doing anything, no programs running or anything the both cores indicate 100% the computer gets extremly slow. I've already formated the computer and it did it again with nothing but windows installed on it.
I tought it was getting too hot or something but the temp is 47 c AVG. i ran Dell diagnostic tool and everything Passed.
Purchased a e1705 in June of 2006. Started having the NMI parity errors within a month.
Contact Dell and they swapped out memory. The problem seemed to be better, but still linger for a while with the NMI errors. Installed Vista on the system and cant remember ever having an error. Then I installed Counter-strike, and started getting the error back. Recontacted Dell and they replaced the motherboard and ram. That hosed my vista install where printing, control panel, stopped working. Backed up my data and reinstalled after formating the drive Windows XP using the Dell disks I received. Now the system isnted on for more than 5-15 minutes without an NMI error.
Oh, now dell is wanting me to send my laptop to a depot where they can make sure its fixed. I will now be without any laptop, working or not for around 2 weeks.
I have the 4 year extended warranty with accident protection.
So I bought an Inspiron 9400 bout two years ago, its a piece of shi*t ... i've had i dunno about 6 or 7 service calls now .... ANYWAYS
When I went to purchase a laptop I was looking at both the XPS and the laptop I decided on (E1705), and the only thing I noticed that was different was that the XPS was substantially more expensive, and had a different look ...
Not to insult anyone's taste or anything, but the look of the XPS is tacky as hell lol ... I mean, its inundated with the word XPS everywhere (even on the touchpad ... ?), i've never seen one in person ... maybe someone can explain to me haha
Anyways, the purpose of this post isn't about the aesthetic differences between the two series of laptops lol. A friend of mine who is in the market to purchase a laptop has asked me what the differences were ... and I couldnt answer him (hence why i'm posting)
What i'm asking then is, other then its shell, assuming the CPU, GPU, RAM, display are identical what is it that makes the XPS better and at a much higher price? Is the motherboard better, or are XPSes less prone to random breaking? If anyone can differentiate the two for me i'd appreciate it, so I can help my friend out before he drops $2.5k on a laptop
An hour ago, I accidentally dropped my Inspiron E1705. The notebook fell from 3ft high and hit the ground on its bottom side (the same position you use the laptop). I tried to turn it on to see if it worked and here's what I found:
The notebook turns on and the battery charges
The hard drive led is blinking like booting
The keyboard works
Screen is blank, no video at all, I tried using an external monitor and got the same result
Well my E1705 was sent in for warranty, and Dell informed me a few weeks ago I would be recieving a replacement system instead of them fixing mine. I guess they were out of stock of parts needed to fix my trusty E1705....
I bought my system from Dell about right at 3 years ago. I got an Inspiron 9100 with 3 years of CC for around $1700
P4 2.8 with HT Prescott 512 MB RAM ATI Mobility Radeon 9700 with 64 MB 15 inch crappy screen 40GB 5400RPM HDD CDR/RW DVD drive XP PRO
They replaced my computer with an e1705
Core 2 Duo 1.73 T5300 2 GB DDR2-667 RAM ATI Mobility Radeon x1400 256MB 17 inch WXGA Samsung 8xDVDRW drive 80GB 5400 RPM HDD XP PRO
I was shocked that I got upgraded so much. Then I started reading some of the reviews of the x1400 and it was terrible. I benchmarked this computer and the graphics did a little better then my old system. I played some of the games that i usually played on my older computer and they ran a lot worse on this computer. I don't know if i should complain about the graphics card, since they did give me a huge upgrade and all.
Also, does anyone know about how they work their warranties. When i got this system and registered it on their website it said that i had three years of CC warranty left. Then when the warranty went dead on my other computer so did the warranty on my new one! If I knew that was going to happen i would had bought the extended warranty before it went dead.
Our nearly 4 year old E1705 has begun spontaneously shutting-off , and I suspect thermal protection is kicking in and causing the laptop to shut off. I installed RealTemp and have found idle temperatures around 60 C, sometimes rising to over 90 C under a modest CPU load (e.g., 50 %). I believe the thermal limit on the processor is 100 C.
I have checked to be sure all the vents are clear and free of dust.
I installed the fan control GUI "I8KFanGUI" to get additional insights into what may be happening, although I have found nothing conclusive. Idle CPE core temperatures of around 65 C, with the GeForce Go 7800 graphics card at about 60 C. I did a video render for about 5 minutes resulting in a 75% CPU load. CPU core temperature climb up to 96 C, and appear to be continuing to climb at the time the render ended,
I recently update the BIOS from A00 to A10. Could that update have done something to the native fan control of the laptop? If not, any other thoughts on possible causes?
I've had my E1705 for 4 months now, and I have unlocked my bios so that I can overclock my videocard. Now I want to see if I can overclock my CPU. It's a T7200, but unfortuanlly I can't find a thread on that any where.
I have seen several sigs with people that have an e1705 with dual HDD's...But I can't seem to find any info on it. I need more HDD space, but I do not want to have to re-install everything on a new one. It would save a lot of hassle.
I don't want anyone here to feel defensive, but can anyone tell me if they experienced this too and how I wrap my mind around this?
I have a E1705 that I got almost 2 years ago and I've gone through agony in regards to what I have always thought was a limitation, that my pc could not handle or even take more than 2 gb of RAM.
I was furious with Dell after I purchased the machine and realized my mistake, but my situation required that I had to keep the pc. Anyway, I would call back every once in a while to see if my pc really couldn't take more than 2 gigs of RAM, and they all said it was limited to 2, period!
Now I'm reading forum posts over here left and right saying my pc can take 2x2 and that it might only recognize 3.25??? Some even report that with Vista 64 I might get to use all 4 gb .....
i'm an owner of a m90, which i recently received from dell in substituion of an e1705.
Talking with abo, the developer of setFSB, it seems the m90 mounts a Cypress clock generator. There are real possibilities he can develop a version of setfsb that can interact with our notebook. The only thing we need now is the pll number (something like cyxxxxx).
It's written on a chip on the motherboard. If someone can help me finding it, we will probably enjoy a new crysis experience
A local gaming forum has a member who is selling a T7700 for $260! Thats not bad at all. But My question is, will it work in my E1705? I think the fastest cpu that will work is the 2.33ghz one, right? Will the T7700 fit in the slot and simply underclock to the other speed? or will it not work at all>?