Whenever my laptop is on a flat service such as a desk I get incredible vibration and distortion from what seems to be the subwoofer in front, even at low volumes. Is this normal? Seems kind of silly...
I've had the m1530 for 15 months (Out of warranty) Never really had any significant problems with it, until yesterday. When it boots up, it will load the desktop and then freeze.
The mouse will move, but nothing will load and everything stops. Not even Ctrl Alt Del works. I keep trying to reboot it, and I have got loads of various errors from the blue screen, a message saying my virus protection is not up to date, message saying a file is corrupted, and a message saying my firewall is turned off.
I guess it sounds like a virus, but it will load every-time in Safe Mode no problem (When I click on Firefox while in SM in actually causes it to freeze, but I uninstalled it and still have the prob). What can I do? Time to reinstall Vista?
My 7900 on the Dell M1710 I have has burnt up and I'm looking for a card to replace it with. I had thought the 7950 was a good replacement, but wondered with the shell being an M1710 are there other cards to put in there or is it only the 7900 and 7950.
Also, is there a good place you can think of to purchase these cards? Ebay is kinda dried up now.
After almost 7 services by the *always gentle* Dell techs, im getting a new problem, my WIFI reception is just crud, being right next to my router i get 4 bars... and if i get a little farther apart it will loose signal and oscillate between 3 bars and 1 bar, and sometimes even disconnect all of a sudden on places i always had good signal, and reconnecting will fail a couple of times before its successfully connects. ( ive tried this with several different routers, and the same happens )
is it possible that my WIFI antennas were damaged? or could it also be my wireless card? ( intel N 4950 )
i have already checked where the 3 antennas connect to the card and they seem ok.
I'm getting a weird white vertical line , about 2 inches thick, all over my display, it doesn't matter if I'm browsing software, or just at boot screen, the line is there.
Weird thing is, it seems to randomly dissappear sometimes, but appears again when trying to shut down the lappy, is the first time this thing happen to my display and I shuted down my lappy, hoping its propably a heat problem.
I would like to thank The realfireblade for answering my post in a different forum. It has been impossible for me to answer him directly. The dell forum refuses my password.
I worked on that all day today, changing my account three or four times. I thought I had finally managed to create a new one that worked, but no, when I tried to answer Therealfireblade, the forum refused my password. I am not stupid, I had written the right password.
I have spent three days now trying to get in touch with somebody at Dell's to know where I can have my little laptop repaired. It is awful
Well, I've just managed to drop my laptop, and the part of the casing has snapped Its a clean snap snapped on the outside, on the just after the curve on the hinge (If you imagine the planel that says XPS on the casing,
well the crack is about the equivilent of half way up that, just after the curvature of the hinge)
I know my warranty doesnt cover accidental damage, so is there any way I could replace this casing myself, of fix it somehow?
Anyone else's HDMI port break on them? I barely used it.. I've had the XPS M1530 since late March/early April but when I tried to hook up my surround sound today it did not work. I tried using different cables, different port on the receiver, and tried directly with my HDTV but my computer does nothing. I updated the audio drivers and flashed the bios, but no luck. Pretty sure HDMI port broke. What a piece of garbage.
After my lid randomly cracking when I closed it less than a month ago and now this.. I can see how this computer will definitely break by the time my 3 yr warranty ends. Good job, Dell. Could they even replace the HDMI port on the machine or would they have to put in an entire new motherboard?
so for a while my headphone jack has been breaking. id have to wiggle around my headphone or speakers plug in the jack to make audio come out the right speaker. now it doesnt work at all unless push the jack in really hard and hold it there. does anyone know how to make audio come out of the microphone jack? like change it from input to output or something lol i dunno.
I was given a dell d620 with a broken screen. Looked like it was cracked down the middle. I replaced the screen (not the lid or hinges). It makes a clicking/cracking type noise when I open the lid. No visible cracks. Now, sometimes when it boots, i get vertical lines and sometimes dollar signs before Windows boots. Windows DOES boot fine with no lines whatsoever. I have researched and found the symptoms are the same for a bad vid card. (I know this has Integrated graphics). If my card was bad, would Windows still boot and look normal? Why would it only affect the boot screen?
I busted off a keyboard ZIF clip on a laptop I was working on. Now no matter what I try I can not get all keys to work. Contacted Dell and they can't give me the part number for the clip so I am able to order a new one.
Can anyone by chance identify the part number of the connector or have any ideas as to how to make all keys work again when fixing the cable in it.
Attached a few pics to help identify/see what I am working with. I'd really like to not have to shell out $120 on a used mobo just to replace it.
I received my Studio 1555 this evening (was away at class, mother signed for package) and upon opening up the box and booting up the laptop, the screen has a small 1 inch crack at the top of it, on the left side of the camera. I don't see any damage on the lid where the crack is on the screen. I have already tried calling the technical support line with no help from the indian speaking fools there. Does anybody know if I'm going to have to send it back to Dell to have it repaired or will they send a tech out with it? I only have the basic 1 year warranty on it since I had to keep the price to a certain minimum.
I've been recently applying Arctic Silver 5 paste to my CPU/GPU according to the guide found on this forum. After that the temperatures not only did not drop they actually are slighlty higher. The problem may be that I haven't use the lint free cloth tough I did took care not to leave any lint on the surfaces. Anyway, I decided to redo a whole operation with much more care. Unfortunately as I opened my XPS M1530 one of the screws heads was broken in a way that I could not use any of my phillips screwdrivers on it. How can I remove it now & more importantly what are the dimensions/sizes of the screws that are used to attach the heatsing to the GPU/CPU as I may have to buy one to replace it & don't seem to be able to find that info anywhere?......
The hard drive of my inspiron 17R 5720 got broken and all the info was lost with it (including the windows 8 image to restore) so i purchased a new HD, but obviously I cant restore ¬†the OS that came with my laptop,
How can I get the Restore Image again? can I download it from somewhere?¬†
I have a compaq V5000 laptop. My granddaughter borowed it over the weekend and she brought it back with the USB port broken on it. it has 2 ports one on top of the other and the center seperator is broken, it can not be used anymore. so My question is will this work so I can have USB? 4 Port USB 2.0 To ExpressCard Express Card 34/54 I saw it on ebay and It look's like just what I need. here is the link [url]
I have E6400 with Vista SP1. When I tested hard disk using HDtune, the burst rate is always much lower compared to the transfer rate. I already tried Seagate, WD, Toshiba, they're all the same.
But if I look benchmark from other users (they don't use Dell though), the graph is different. Here is what I have: My graph: the burst rate is always low. E6400 users, can you test yours and let me know?
Has anyone broken the power jacks on their aspire ones? I saw from some pics that it's soldered right onto the board. My wife tripped over mine yesterday and may think the plug is a little bit looser than before, but still holds just fine.
I dropped my first gen Vaio Z recently and it does not even turn on.. Is there anything I can do with it? I think the motherboard is broken and I'd like to get some value out of it if its possible other than using it as a nice looking paper weight.