I dropped my studio 15 onto the floor and cracked the LCD display all the way across.
The display is totally dead.
Ive been in touch with dell direct and they are quoting £200 for a replacement screen, and i have to fit it myself at that price.
I received my Studio 1555 this evening (was away at class, mother signed for package) and upon opening up the box and booting up the laptop, the screen has a small 1 inch crack at the top of it, on the left side of the camera. I don't see any damage on the lid where the crack is on the screen. I have already tried calling the technical support line with no help from the indian speaking fools there. Does anybody know if I'm going to have to send it back to Dell to have it repaired or will they send a tech out with it? I only have the basic 1 year warranty on it since I had to keep the price to a certain minimum.
View 10 Replies View RelatedI would like to thank The realfireblade for answering my post in a different forum. It has been impossible for me to answer him directly. The dell forum refuses my password.
I worked on that all day today, changing my account three or four times. I thought I had finally managed to create a new one that worked, but no, when I tried to answer Therealfireblade, the forum refused my password. I am not stupid, I had written the right password.
I have spent three days now trying to get in touch with somebody at Dell's to know where I can have my little laptop repaired. It is awful
I was given a dell d620 with a broken screen. Looked like it was cracked down the middle. I replaced the screen (not the lid or hinges). It makes a clicking/cracking type noise when I open the lid. No visible cracks. Now, sometimes when it boots, i get vertical lines and sometimes dollar signs before Windows boots. Windows DOES boot fine with no lines whatsoever. I have researched and found the symptoms are the same for a bad vid card. (I know this has Integrated graphics). If my card was bad, would Windows still boot and look normal? Why would it only affect the boot screen?
View 6 Replies View RelatedMy screen is broken (long story... lent laptop to a friend, came back all screwed up).
my question is: a) with a replacement screen, do I need a new inverter as well, or no and b) if so, would most replacement screens come with one???
i got a dell1525 which all worked fine kids broke the screen, it has a hdmi lead out on it so i connected it to my tv which has a pc channel but when i go to hdmi 1 it just stays black screen
on the tv i have also tryed a vga lead with the same effect even pressing the fn key and
f8 is there a way i can get some picture or test as the laptop seems to boot up fine and id like to just buy a new screen rather then bin it
many thanks
how to start up this laptop so it will bring up an external monitor so I can transfer my data to another machine?
View 3 Replies View RelatedI recently dropped my acer 5315 and now the screen is broken. There are a lot of black blotches and a little color and some lines when I start up and it stays that way.
Would anybody know approximately what it would cost to replace the screen or know where I could purchase one.
How big of a job would it be to replace as I have never worked on a laptop.
I broke the screen of my sony vaio sr19vn. (part number LTD133EWZX) I tried several screen selling companies, but they don't seem to have the one I need...
So I was wondering if it is possible to just buy another screen of the same size?
My husband dropped his Aspire 3680-2682 the other day and the screen went wonky. I booted it off a VGA monitor and it seems to be fine running from there, BUT I could not get it to boot to VGA except in safe mode, and when I choose to boot in regular mode it goes to the LCD screen and doesn't allow switching the display to the external monitor.
This is the only thing that concerns me that it might not be just the screen that sustained damage.
I was eventually able to get th bezel off (it doesn't come 100% off on this model but doesn't need to) and remove the lcd panel for inspection. The thin board taped to the back of the panel doesn't seem to be visibly broken or strained and the connectors to it were taped so firmly in place they didn't budge on impact. The small board that rests at the bottom of the top case under the bezel (the inverter?) can't be inspected well and I don't want to damage it by trying. In any case nothing appears damaged to the naked eye on or around the screen.
The first pic is how the screen looks when booted; it also (visibly) flickers and redraws continuously. The second shows that applying pressure allows a clearer view of the console and stops the flickering.
[url]
[url]
I have found a replacement screen online for 50.00 and feel comfortable enough trying to replace it rather than spend the cost of a new laptop on sending it for repairs.
However, if it's not just the screen I don't want to throw more money at this.
In your experienced opinions, does it look like the damage is typical of a broken LCD screen and not something in the motherboard? (no clue on how to get a closer look at that stuff. took every screw out of it last night and couldn't get the bottom case to reveal its secrets.)
Restarted my Ideapad last night (following a virus scanner update), and after the restart the screen came back with multicoloured vertical stripes. Fortunately I still have my old desktop monitor in the house, so I plugged it into that and managed to get the screen displaying on there. Â Having run the Lenovo support tool, it hasn't managed to find any hardware issues. The image below is set so the same image should be displayed on both monitors.
View 3 Replies View Relatedthe enter key on my windows 7 latitude E6510 is broken and i am unable to pass the resume loader screen by clicking enter. I tried cleaning underneath my keyboard with no luck.
View 1 Replies View RelatedInspiron 1300, been plugging an external monitor in & using function F8 for years but it just failed. The monitor isn't recieving the signal anymore. Tried another monitor as well. My laptop screen is lit up as always, and I can see some movement when I cntrl alt delete, but I can't read anything to see what's wrong.Is it my video card? Is that the thing I plug my VGA cord for the monitor into?
View 1 Replies View RelatedAspire S3. The PC is perfectly fine, except the fact the the screen is broken. It already broke twice (just by opening...), so we are not spending money on a third one.So, what I want to do is to connect it to an external monitor through HDMI (and possibly remove the broken screen, since it has no use). I can do it in Windows, but not outside Windows (BIOS) and I'd like install Windows 8.1 or 10. So my question is: can I force output from boot into HDMI? If so how, if not, what alternatives do I have to install a new version of Windows without spending a small fortune?
View 3 Replies View Relatedmy laptop's lcd screen died 1 month after guarantee expiry. Since original LCD replacement screens are crazy expensive, I bought physically compatible lcd screen, that supports same resolution.
But I cannot get any higher resolution as 1024x768 (I've used 1400x1050 on original). I suspect there is a problem with drivers - my screen is recognized as plug and play monitor, but settings won't offer me any higher screen resolution.
Long ago (A year ago lol) I bought the Gateway FX gaming notebook. It was a great PC and could not beat the price with the hardware and performance it offered, however the screen was really bad.
At first glance it wasn’t, 1080p res and good brightness level, but when I plugged in my old external LCD monitor to dual screen, I was floored. My 4 year old desktop LCD screen was almost better in every single way.
The Gateway’s colors were dull, muddy, and dark, no matter how much I recalibrated the screen, I could not get it to look anywhere as good when compared to my Samsung screen on my desk.
Will Dell replace this unit? Their is no way they can replace the parts, which model will they replace it with? specs are below............................
View 8 Replies View RelatedWhenever my laptop is on a flat service such as a desk I get incredible vibration and distortion from what seems to be the subwoofer in front, even at low volumes. Is this normal? Seems kind of silly...
View 3 Replies View RelatedI've had the m1530 for 15 months (Out of warranty) Never really had any significant problems with it, until yesterday. When it boots up, it will load the desktop and then freeze.
The mouse will move, but nothing will load and everything stops. Not even Ctrl Alt Del works. I keep trying to reboot it, and I have got loads of various errors from the blue screen, a message saying my virus protection is not up to date, message saying a file is corrupted, and a message saying my firewall is turned off.
I guess it sounds like a virus, but it will load every-time in Safe Mode no problem (When I click on Firefox while in SM in actually causes it to freeze, but I uninstalled it and still have the prob). What can I do? Time to reinstall Vista?
My 7900 on the Dell M1710 I have has burnt up and I'm looking for a card to replace it with. I had thought the 7950 was a good replacement, but wondered with the shell being an M1710 are there other cards to put in there or is it only the 7900 and 7950.
Also, is there a good place you can think of to purchase these cards? Ebay is kinda dried up now.
After almost 7 services by the *always gentle* Dell techs, im getting a new problem, my WIFI reception is just crud, being right next to my router i get 4 bars... and if i get a little farther apart it will loose signal and oscillate between 3 bars and 1 bar, and sometimes even disconnect all of a sudden on places i always had good signal, and reconnecting will fail a couple of times before its successfully connects. ( ive tried this with several different routers, and the same happens )
is it possible that my WIFI antennas were damaged? or could it also be my wireless card? ( intel N 4950 )
i have already checked where the 3 antennas connect to the card and they seem ok.
I'm getting a weird white vertical line , about 2 inches thick, all over my display, it doesn't matter if I'm browsing software, or just at boot screen, the line is there.
Weird thing is, it seems to randomly dissappear sometimes, but appears again when trying to shut down the lappy, is the first time this thing happen to my display and I shuted down my lappy, hoping its propably a heat problem.
Here's a pic:
[url]
I hope that it doesn't be any gfx card problem...
the latch on my e6400 has broken. the bit of metal which protrudes out from above the screen has snapped off. now the lid cannot click close and stay closed.
View 10 Replies View RelatedWell, I've just managed to drop my laptop, and the part of the casing has snapped Its a clean snap snapped on the outside, on the just after the curve on the hinge (If you imagine the planel that says XPS on the casing,
well the crack is about the equivilent of half way up that, just after the curvature of the hinge)
I know my warranty doesnt cover accidental damage, so is there any way I could replace this casing myself, of fix it somehow?
when i woke up this morning one half of my screen was white and the other side was pretty dark.
So I decided to turn the computer off and kept it off for 30 mins. When I started it back up the backlight seemed fine but it still looks kind of dim on the left side.
Anyone else's HDMI port break on them? I barely used it.. I've had the XPS M1530 since late March/early April but when I tried to hook up my surround sound today it did not work. I tried using different cables, different port on the receiver, and tried directly with my HDTV but my computer does nothing. I updated the audio drivers and flashed the bios, but no luck. Pretty sure HDMI port broke. What a piece of garbage.
After my lid randomly cracking when I closed it less than a month ago and now this.. I can see how this computer will definitely break by the time my 3 yr warranty ends. Good job, Dell. Could they even replace the HDMI port on the machine or would they have to put in an entire new motherboard?
so for a while my headphone jack has been breaking. id have to wiggle around my headphone or speakers plug in the jack to make audio come out the right speaker. now it doesnt work at all unless push the jack in really hard and hold it there. does anyone know how to make audio come out of the microphone jack? like change it from input to output or something lol i dunno.
View 10 Replies View RelatedI have a 4 year old Inspiron 700m laptop with backspace key does not working.
View 10 Replies View RelatedI busted off a keyboard ZIF clip on a laptop I was working on. Now no matter what I try I can not get all keys to work. Contacted Dell and they can't give me the part number for the clip so I am able to order a new one.
Can anyone by chance identify the part number of the connector or have any ideas as to how to make all keys work again when fixing the cable in it.
Attached a few pics to help identify/see what I am working with. I'd really like to not have to shell out $120 on a used mobo just to replace it.
i made a wrong step on my opened dvd drive, was bend ~ 30 degrees. sound: typical breaking plastic.
if i were a n00b i would just slide it in and stay calmed. but i know how complex computers are and don't want to loose my data (again) or have my house burned because of a shortcut or so.
btw shaking the laptop even with the drive removed sounds like there is a loosy jumper or something, is that normal?