I have a dell E6400 Latidue with 4 Gig of memory I would like to upgrade to 8 gig. I need for my building control software. Were can I find 8 gig .All I can find is the 4 gig memory updates which is what I already done...
I'm about to order an E6400 from the dell outlet and was wondering if you all have any advice before i order.
I want to upgrade the memory and HD, but i dont know what to buy exactly.
I want 4 gb of RAM, and the quietest and most inexpensive HD that is 250 or 320gb that I can get. I assume that a 5400rpm is quieter than a 7200rpm drive. Any ideas?
I keep running into a problem with windows not loading after installing new RAM. I am currently using the original 4GB (2 x 2GB) it came with and I am wanting to go with 8GB (2 x 4GB). I am using the recommended Crucial RAM and I have checked the BIOS which recognizes the new memory. The BIOS is up to date running A16 version. I have not been able to find any settings that would be inhibiting it from running. I have noticed that the currently installed RAM runs a 1067mhz even though it is rated at 1333mhz. As far as I can tell there is no memory remapping feature for the BIOS which does not make sense.
Here is a snap shot of what I have:
Operating System System Model
Windows 7 Ultimate (x64) Service Pack 1 (build 7601)Install Language: English (United States)System Locale: English (United States)Installed: 9/29/2014 3:01:57 PMBoot Mode: BIOS (Secure Boot not supported) Â [Code] .....
I been searching around for a new optical drive(dvdr+dl) for my e6400. so far, there a two types of notebook drive that i know of. the more popular 12.5mm and ultra slim 9.5mm optical drive. which type does the dell latitude e6400 uses?
Im looking at this particular drive as my upgrade, but one comment stated below and was wondering if its true? http://www.newegg.com/Product/Produc...82E16827106260
Pros: Sata slim DVD/RW Cons: Drive to thick to fit in Dell Latitude E6400
I just purchased a used Elitebook 8540w with i7 quad core and four memory slots (I love it!).  It is running 64 bit Windows 7 Professional  It came with one 4gb memory module and I purchased an additional 4gb module to bring total RAM to 8gb.   I have the HP document that shows for two 4gb memory modules, one should be in memory slot 1 and the other in memory slot 3 for correct functioning of dual channel memory.  All set right?  Not quite.  In the Elitebook 8540w, the primary memory slots under the keyboard are clearly labeled "1" and "2"  However, the expansion memory slots on the underside of the chassis are also clearly labeled "1" and "2"  Opps!  There is no "3" and there is no "4"  In which of the unfilled three slots do I install the second 4gb module for correct functioning of dual channel memory?
The price of 2nd user Latitude D630's seems to be holding up quite well in the UK. Does this indicate that it is still a popular machine and favoured over the E6400?
I briefly checked out an E6400 the other day and for a choice between machines of approximately similar spec I would opt for the D630 rather than the newer E6400.
I would be interested in opinions from users who have experience with both models.
I bought my E6400 about a year ago now and never got around to upgrading the RAM from 2 GB (on 1 DIMM) to 4 GB. Which memory do I need? I am still running Vista Business 32-bit (haven't looked into the new Windows 7 yet). How much will a 2 GB stick run me these days, and does anyone have a link to the correct memory I need
I'm pretty new to Dell notebook world. I was always told that Dell has a stinky customer service and their image wasn't that good around spot but care sharing whats good and bad about dell in general?
1- In the LCD option, it says touchscreen. Does that mean I can somewhat use this laptop like a tablet? ( Without the ability to twist the screen of course..)
2-Never knew whtas the different between 1dimms and 2dimms in RAM....
3-Compare Geforce 9400gs with the Mobile Intel® Graphics Media Accelerator X4500HD With PC-Card. Plus, what do they mean by "PC-Card" or "EXpress card" ?
4-Does Dell notebook actually give us 64bits windows or they're all 32bits unless they mention the option of 64bits?
5-Whats the difference between the normal e6400 model and the ATG model? Simply more durability +weight?
6- Whats an encrypted HDD or a ruggedized HDD?
7- I'll be using the notebook for design purpose. Such as photoshop, flash, illustrator or such. I'll be using 2-3 program at once with several picture/projet +internet + music. If my specs are 2.26ghz or 2.4ghz + 4gb ram + intel HD4500HD, will this notebook handle it?.............................
Its a certified refurb; it has everything i want at a great price:
-- Latitude E6400 Laptop: Intel Core 2 Duo P9500 (2.53GHz, 6M L2 Cache, 1066MHz FSB)
-- 14.1 inch UltraSharp WXGA+ (1440x900) LED Display
-- Back-lit Keyboard
-- Genuine Windows Vista Business
-- Brushed Metal Black
-- 24X CD RW/DVD Combo Drive
-- 2 GB DDR2 SDRAM 800MHz (1 DIMMs)
-- 90W AC Adapter
-- 9 Cell Primary Battery
-- 125V Power Cord
-- Mobile Intel Graphics Media Accelerator 4500MHD With Express Card
-- 250 GB Free Fall Sensor Hard Drive (7200 RPM)
-- Dell Wireless 1510 802.11a/g/n Draft Mini Card
-- Integrated Webcam with digital microphone
Im upgrading the RAM to 4gb, and maybe the hard drive if its too loud. I got the integrated GPU on purpose so it runs cooler and quieter and has better battery life (I don't play games). Ill try for a new version of vista too. Im happy i got the p9500, that was probably the only one left that was a decent price,
I'm planning to purchase a Dell Latitude E6430 in a few days time but I have a couple of things to clarify before I purchase this laptop. The question is, Dell manual correctly says this supports up to 16GB of RAM. However Dell does not provide/ship 16GB of ram with this laptop.
I would purchase aftermarket 16GB of ram to do what I want to do with this laptop. But I'm uncertain which RAM specification I should buy. Should I buy DDR3L (1.35V) or DDR3 (1.5V) SODIMM ?
This is what the Latitude E6430 manual says :
MemoryMemory connector two SODIMM slotsMemory capacity 1 GB, 2 GB, or 4 GBMemory type DDR3 SDRAM (1600 MHz)Minimum memory 2 GB Maximum memory 16 GB
I'll be able to order my new E6400 soon, as follows:
CPU: Intel P9700 2.8GHz GPU: nVIDIA Quadro NVS 160M / ExpressCard HDD: (whatever is cheapest) I'll replace with a Scorpio Black or Blue (see question 5) MEM: (whatever is cheapest) I'll replace with 2x2GB of Corsair DDR2-800 WI-FI: (whatever is cheapest) I'll replace with an AR9280 half miniPCIe card LCD: WXGA+ (1440x900) LED-backlit - Backlit keyboard, Bluetooth module, 6-cell battery
Keep in mind that I won't be running Windows on this machine, but instead, Linux (Arch Linux x64).
Questions:
1) Is the nVIDIA Quadro NVS 160M enough to run Compiz-Fusion smoothly?
I previously ran Compiz-Fusion with an Intel GMA X3100 integrated GPU and was underwhelmed. Everything worked, but the animations were pretty herky-jerky, most of the time. Aero animations under Windows 7 were similarly not very smooth. I'm hoping for more with the nVIDIA Quadro (I read one report that Aero with an E6400/nVIDIA wasn't very smooth).
2) How bad *really* is the touchpad?
I've heard reports that the touchpad is imprecise and laggy, but I've also heard from people who say they haven't had any issues. Is this a "hit or miss" situation with the hardware, or is it due simply to what people are used to? Or has this been fixed?
3) How durable is the lid/screen?
I've heard reports that "the E6400 is well-built and durable ... except for the display," with no real elaboration. Is there any truth to this? Bending, flexing, etc.? Screen distortions if pressure is applied to the back? Does it seem strong? Feel strong?
4) Does the "brushed-metal" on the back of lid look good in person? Or does it look cheap, fake, tacky, etc ... ?
5) Can I replace the hard-drive?
I heard from one owner that the hard-drives used in the E6400 use a non-standard SATA layout, and thus aftermarket hard-drives cannot be installed. That seemed like it would be a very stupid thing for Dell to do ... but I thought I'd ask.
6) After time (6-12 months), does the display start to wobble when open?
I had an Acer Aspire 4720Z (I know, cheap quality) whose display would wobble when open. At the top of the screen, probably about 1/2" to 3/4" of wobble. The Dell Inspiron 1521 I'm using now does the same thing ... very annoying. Does the E6400 exhibit anything like this even AFTER extended ownership? Say 6 months to a year or more?
7) Is the audio bad?
I've heard from a few people that the audio is simply horrid, even through headphones. I've also heard that disabling PC Spk has fixed it for some people ... is this an outdated issue that has been fixed by Dell?
8) Is there anything else I should know?
If there's anything else that I need to know, I'd love to hear it.
Sorry for so many questions, but this will be a big purchase.
After reading this thread: E Module Bay 2.5" drive. about the possibility of a second hdd in the Latitude E Series I wonder if it is possible to use Raid0 with E6400 as mentioned in the manual. Looking after it in the Bios I can't find any Raid Modus for SATA-Operation. Any ideas???
I have been reading about people getting so many hours out of their E6400. I have the 9 cell battery and running the screen on the lowest setting, Bluetooth off and wifi on im getting close to 6 and a half hours of battery life. Is this normal....
I heard about doing a clean install, what does this do, and what benefits would i be achieving by doing this?..
Is there anything else i can do to get a little more juice out of the battery when i need it? I plan to have wifi on most of the time when it is being used. Basic web-surfing and Microsoft word...
I am trying Windows 7 on my Latitude E6400, and I am having two a little issue for the system.
First issue is despite enabling advance performance for the drive under Device manager, Windows 7 gives me score or 2.0, than in Vista the score is significantly higher in the 5.0 range. My HDD is the Hitachi 5400RPM 160GB.
Second issue is, I don't know what I missed when installing the drivers/software, but I don't have the on-screen volume control. But the ambient light sensor, brightness level and keyboard backlit mode, does appear.
I just got a E6400 from outlet (well it will be here around the 17th). It has a Dell 1397 802.11B/G Wireless Mini Card but I want to get a wireless-n card.
Are there 3 antennas in the laptop still that would allow an upgrade to a Intel wifi 5300 card (assuming it can be found outside of the customization page)?
Is there anywhere cheaper than dell to buy the wireless-n part for the E6400? Dell only has the 5100 for $59.99 and haven't seen the 5300 in parts.
I have a Dell Latitude e6400, running MS Vista (latest SP2 + updates).
It is running Bios A14 (recent update).
My issues are: 1. Computer will start up and work normally. However, on shutting down and restart, it will not restart 2. The 'on' button flashes every few seconds as if the notebook is 'trying' to start up and the HDD light flashes every so briefly. This recurs indefinitely.
I purchased the Dell Latitude E6400 and was supposed to receive the WXGA+ 1400x900 LED screen. Under my device monitor hardware id it displays Cmo1436. Is this the correct LED screen or rather an LCD?
I know that they are two different focused machines, but now that the Studio XPS has been out for a little while, can anyone comment on how the E6400 and 13" SXPS stack up against each other?
Battery life? Computer performance CPU for CPU? Keyboard quality? Quality of build? Screen quality?
I'm trying to switch out the processor of my E6400. When I put the new processor in and start the computer, the lights blink, sometimes the screen turns on (to black), but the BIOS never loads (or even starts). The computer then turns off, and the caps and scroll lock lights turn on, and the num lock light starts blinking.
Does anyone know what that blinking code means, and more importantly, why the computer isn't starting?